-
how tall does a scrog cab need to be?
i'm really trying to go unnoticed here, not really that stealth, just can't be 8 feet tall. i'm definitely going the scrog route...just can't seem to find good plans for a micro scrog box. as small as possible, if i could grow 2 plants at a time i would be happy. how small are we talking, is this even possible?
-
how tall does a scrog cab need to be?
Givin proper room for light height, etc... you can scrog or LST and get 10" kolas. Do an advanced search on scrog, I did one on that and LST I think.
I screwed them both up so theres some valuable lessons. But the result was kick ass. 4 - 5 feet is very doable.
good luck on your tomatos.
-
how tall does a scrog cab need to be?
if you are planning using to plants you want your scrog to be 4ft by 2ft that gives the plants 2ft of space each but scrog can be done in v shapes actually they can be done in any shape desined to fit your needs hope it helps the postman.
-
how tall does a scrog cab need to be?
i had a scrog cab that was 2ft deep x 2ft wide x 32inches tall and the yeild on it was 4-5oz with 1 or 2 plants
-
how tall does a scrog cab need to be?
What kind of lighting do you plan on using.....has alot to do with the height.
Have a good grow!:thumbsup:
-
how tall does a scrog cab need to be?
well i'm not sure, still researching the lighting...what do you guys recommend for such a small box (justaseed...my box will probably be about your size, what lights did you use?)
-
how tall does a scrog cab need to be?
250 hps sound's right what i was wondering is
could you use a 400 hps they are about the same price.
would any one know if that would work out o.k.
thank's
-
how tall does a scrog cab need to be?
that might be a lot of heat for such a small area...although, don't cooltubes help? it would be awesome if i could stick a 400w in a cooltube...hmm
-
how tall does a scrog cab need to be?
also can someone answer, how many different lights will i need? i've read so much over the last 2 weeks but i'm still unsure. let's say i start from a clone, so right there we can say that i won't need a different light to get a seed to sprout...? really if i start from a clone all i would need would be a 250w or so and make it so that it can move up and down...? that light would get me through veg and flowering stages?
-
how tall does a scrog cab need to be?
my cab was actually a double so there were 2 chambers side by side that each measured 2' x 2' 32". 1 had a 150 hps and 4 42watt cfls the other side had a 125 vitelume cfl 4 42watt cfls and a 65watt aquarium strip cfl. here are some old pics of the set up. i've posted them before but i think you will appreciate the set-up anyway!
-
how tall does a scrog cab need to be?
hello, just thought i'd throw my 2 abes your way, heres a pic of my cab, which is going to be a scrog cab in the future, but since i'm only half done with it, i'm growing straight from seed untrained, btw, I drew inspriration for my cab from justaseeds. The height of my cab for the flowering "side" is 39 inches and the height for the future vegging side is 24 inches. my previous grow box was 29 inches and it turned out to be more than adequate for my first grow. Read up as much as you can from these forums, theres alot of good info in these here threads
-
how tall does a scrog cab need to be?
justaseed - did you set up a system to remove the screen with the pot when you needed to flush the soil?
-
how tall does a scrog cab need to be?
btw, very excellent grow...i'm going to build a box that's 2x2x4 - looks to be the perfect size for growing 2 plants.
this seems to be my thread for questions...since i cant have a separate box for cloning, would it be possible to take cuttings for clones after harvesting? i'm hoping to harvest, clone, and restart the growing process all in the same box.
today i feel like going to home depot...gonna get some wood :D
-
how tall does a scrog cab need to be?
hey justaseed, another stupid question...how'd you have enough room up there for a ballast? doesn't look like you have one...were you running lights that didn't need a ballast..?
-
how tall does a scrog cab need to be?
hey sry to intrude on ur thread.. but justaseed i was wonderinghow do you get the bud sights through the 1"x1" screen without damaging the fanleaves or the budsight? and also do you put them through the screen prior or post budding stage? thanx in advance
~notorios p.s good luck wit ur grow homestar!
-
how tall does a scrog cab need to be?
it was a remote ballast so it was behind the box. i lined the bottom with plastic and set the pots on top of some plastic eggrate(the stuff they use for lights in drop ceilings) so when i flushed i would just use a shop vac to vacuum out the water. in a small cab remote ballasts are a must imo. you don't want the extra heat from the ballast inside the grow chamber. i rewired this light from home depot to make it remote. it's really simple.
http://www.lowes.com/lowes/lkn?actio...50H&lpage=none
i did replace the bulb with a horticultural bulb (better spectrum and a few more lumens)
notorious, you train them through the screen long before buds form so the holes are plenty big enough to fit the stems through.
-
how tall does a scrog cab need to be?
ok, now i understand... thanx alot justaseed. im finally gonna try scrog but it always seemed so complicated but ur pics made me want to scrog wtg!!!
and thanx for the quick response
-
how tall does a scrog cab need to be?
Quote:
Originally Posted by homestar
btw, very excellent grow...i'm going to build a box that's 2x2x4 - looks to be the perfect size for growing 2 plants.
this seems to be my thread for questions...since i cant have a separate box for cloning, would it be possible to take cuttings for clones after harvesting? i'm hoping to harvest, clone, and restart the growing process all in the same box.
today i feel like going to home depot...gonna get some wood :D
it can take a very long time to reveg a plant for taking clones so i would not recomend that as way to do it(unless you need to save the genetics). build a small clone/veg chamber with some flouros, that way you will have plants ready right after harvest. otherwise it could take up to 2 months to reveg the plant after harvest that another 1-2 weeks to root the cuts then a few more to veg them. that is as much as 3-4 months from the time you harvest until the plants are ready to be put to flower which will take about 2 more months so that's almost 6 months between harvests when it could be 8 weeks or so between harvests with a second chamber running!
-
how tall does a scrog cab need to be?
hey just JUSTASEED it looks like you use a soiless mix for your plants? is that better than clay pebbles or the other stuff? how much do you yeild with what you have in the picture? what kind of lights?
when i "GROW UP" i want to grow up just like you JUSTASEED
-
how tall does a scrog cab need to be?
thanks for the compliment. i did use soiless, promix bx to be exact. i am on probation for 1 year so i don't currently have a grow but i did yeild 12+ oz from my 400hps grow and am confident i can raise that to a lb when i start up a grow again! the pics above were of my stealth cab, the left side had 150hps and 164cfl watts and yeilded 5+. the right side had about 350cfl watts and yeilded 4+ oz
-
how tall does a scrog cab need to be?
Just - May I ask what seed company your WW seeds came from? Very impressive.
-
how tall does a scrog cab need to be?
i don't know the breeder of the ww's i was growing, but it was a great pheno
-
how tall does a scrog cab need to be?
So this might sound crazy but coming up here im going to be trying a scrog in a 14" rubbermaid, impossible??? we shall seee!!! And if i do end up running out of room i can always put another rubbermaid underneath it and cut the top and bottom out so it could get alot deeper, but i wanna try and do it without the extension first.
good luck on your grow:thumbsup:
-
how tall does a scrog cab need to be?
You can have a scrog cabinet be as tall as you want or as short as you want. I've got a PC case doing a screenless scrog (aka micro-lst) and I've got a krusty bucket and DWC bucket training in an 18"d x 48"w x 32"h box.
The only thing really limiting you is the type of light you use, from there you have to consider heat management and ventilation.