i'm about to get my grow on the go i just need a way to get co2 to it and some type of oder control have any ideas? anyone ?
Printable View
i'm about to get my grow on the go i just need a way to get co2 to it and some type of oder control have any ideas? anyone ?
light some candles?/ buy some co2?
open a window;)/ ventilation system with a filter
I assume that was a JOKE??Quote:
Originally Posted by Blaze420
Once you open the window you loose the CO². Candles don't guarantee you can make CO². Open a window and let the odor out too, ya that good advice let everyone know what you are growing.
Carbon scrubbers are what you are looking for to deal with odor. Search the forum I have posted several times how to make a scrubber. No pictures you don't need them it's easy to make.
Tank CO² needs 120v relay to turn it on and off at timed intervals. You can get one from eBay for under 100 bucks if you look hard enough.
Zandor i can't find anything on ur post about a carbon scrubbers ... what are they ? can you just expalin it here or add a link to it ?
I just put it on another post yesterday, hummm? I can't fine it either.
so
You get 4 furnace filters not cheep ones and not expensive ones. Get the ones that cost about 5 bucks at HD. They have a metal screen on one side to add support. Place the first one with the metal down. Add 2 pounds of active charcoal and spread it around (I get mine from the fish store that sells pond stuff it cost 4 bucks a pound). Then you place another filter (screen side down) add another 2-pound bag of charcoal then the third filter and the last 2 pound bag of charcoal. Last you want to place the last filter with the metal screen side up. Line them all up and use gray tape to seal all the ends together so the air can only go through the filter and not lose any charcoal out the ends. Make a box that all 4 filters fit snugly in. At the top of the box leave about 8? of space. Install your fart fan at the top of your box the 8? spacing will help to even out the air pressure on the intake. Now I use a furnace screen like a house uses slightly larger then the filters so with 4 screws I can change it out and access what I need to. Mine is installed in the roof and the return just pumps it back into my room. Really it??s that easy the whole thing is to seal all the filters together so they are just one thick filter and to have the air gap at the top so your fart fan does not just draw air from one place in the filter.
It really does work.
so when i put the furnace screens up ... i can put them up anywhere in the box ... and i've deiced that i'm going to break my box into 2 sections veg/flowering would i just have to put it where their flowering? (sound stupid but this is my first grow)
I like mine in the roof outside the room but that's because I can do that. Most people just make a box that site in the room. Air in from the top and out the bottom fyi.
so with my box where would you sugest putting them ?
air in from the top and out the bottom scrubbs better.
And do you want the "scrubbed" air to be pumped into the growroom, or the surrounding air by the growroom? I have always bee confused about this.
???????
Depends of if you are running a sealed room or not. With a carbon scrubber you can do either one. You can vent to the outside or you can return the scrubbed air back into the room. You also can use 2 motorized air dampers so you can either vent to the outside or return the air back into your room and still use the same scrubber to do both.
You can have flexibility to match air flow with how you are growing and if you are using CO² or not and need to vent to the outside.
how would you make one to handle one plant, may sound stupid but have to take the precaution