Is 86-88 Degrees too hot for 10-12 Sativa clones? With the light off it gets down to 75-77 Degrees in my 3 x 3 1/2 closet.
Printable View
Is 86-88 Degrees too hot for 10-12 Sativa clones? With the light off it gets down to 75-77 Degrees in my 3 x 3 1/2 closet.
You're at the upper end but as long as you keep an eye on there water supply they will probably be ok. Done around 80 is perfect.
If these are sativa dominants they may not do real well in a closet, they may need more room. If you used co2 86-88 would be real good.
a good supply of fresh air can help offset high temperatures
My temps stay around 88 and as Dutchpimp said if you have a good air flow you should be good... What type of lighting are you using?
Happy growing:jointsmile:
I have a fresh air supply. Both cool air intake and hot air exhaust from two '6' inch blowers. It didn't fix the tempature issue. The problem is coming from using a 1000 watt light, converted into a 600 watter in a 3 x 3 1/2 closet space. There is plenty of fresh air, just way too much heat coming off of the light, even when I use a blower to cool it down it is still hot to the touch.
I know nothing about Co2. Maybe I should look into that.
I introduced 6 White Widow clones into my closet growroom today. It is running at about 82 Degrees right now with a humidity level of 45%. The light has only been on for a few hours, so tempetures could still easily rise. I'll keep everyone updated cause I might need some tips later on down the road.
Quote:
Originally Posted by Dutch Pimp
Like add a passive vent to the room!:thumbsup:
Wait, are you running a 1000w light on a 600w ballast? A little clarification for the smoky mind, please?Quote:
Originally Posted by disoBAYish
Yes and no. Lol.Quote:
Originally Posted by khyberkitsune
The light is a 1000w Sun System yes, but the ballast is interchangable. It has a dimmer on it that has 4 different lighting options. 1000w/750w/600w & Super Lumens.
I have a 1,000w Lumitek Ballast, The purple one..... From what I understand, you can use any of the lighting options from a 1,000w light because the ballast dims the light down to the desired wattage.
Your staring to scare me.... is this a no no?
BTW.... I have my temps down to 81-82 with the lights on now. I hope it stays around there and doesnt shoot back up.
Always match bulb with output. Underdriving a bulb, just like underdriving any electronic device (unless it is designed to handle such things,) can cause undue stress on the electronics, the bulb, and more.
So I should buy a 600w HPS bulb then? Thanks for the tip, the last thing I wanna do is fry all of my shit. :thumbsup:Quote:
Originally Posted by khyberkitsune
Sorry about the double post guys.
Anyway....
I went into my local hydro store and asked about the issue you brought up Khyber. That being me running a 1,000w bulb converted by an interchangable ballast at 600w. I told the guys exactly what I had, and how I was running it. He told me the exact opposite of what you said. He told me that running the 1000w bulb at 600w was not only conserving energy, but prolonging the life of the bulb itself.
2 very different opinions.... someone please clarify.
I used to install street lighting when I worked for Memphis Concrete Cutting. Any experienced electrician will tell you to match wattage for wattage.Quote:
Originally Posted by disoBAYish
That 1000w bulb is still going to try drawing more than it's being fed, this will damage ANY ballast, magnetic or electronic. It shortens the life of the ballast, and those tubes are designed for MINIMUM 800w input power at 480-660V. Anything less will cause damage.
That must be a Galaxy ballast? Nice ballasts. You're in the neighbourhood with temps, if you run into too many problems turn it down to 600w. You are supposed to use a 1000w bulb for all settings. I imagine its to keep people from screwing up if they put a 400w bulb in and cranked it up to 1000w.Quote:
Originally Posted by disoBAYish
My ballast is a digital 1,000w Lumitek.... The purple kind. It makes sense to me that you would use a 1,000w bulb for all settings, for reasons like you stated. However I also trust Khyber's judgement.Quote:
Originally Posted by killerweed420
What to do, what to do....
Update:
After many readjustments, I have my grow room down to a consistant 77 degrees. Thanks for all the help guys, the grow is going well. :thumbsup:
Cooltube? I'd like to know how you managed that nice 10 degree drop :jointsmile:Quote:
Originally Posted by disoBAYish
It was a 3 step process that transpired over the course of a week and a half as I slowly adjusted things with it a little here and there.Quote:
Originally Posted by bigtopsfinn
1.) Simply introducing the plants into the grow room cooled the temp by 2 degrees. I think this is mostly because of the cool damp soil. I water them every other day with 48 degree water at a 7.0 PH level.
2.) I removed the ballast from the grow room. That dropped temps about 1-2 degrees.
3.) I trimmed a few feet of ducting off of the blower fan to give it a little more horsepower. This did me wonders as it dropped temps down about 4-6 degrees. The seals to the blower were not air tight either, fixing that halped as well.
So in short... I introduced plants, removed ballast, then fixed the blower ducting.
That my friends is the KISS principle in action...:thumbsup:..(Keep it Simple, Stoner)Quote:
Originally Posted by disoBAYish