Printable View
Giving it my first shot and cloning and doing it with Green House "Super Lemon Haze". Anyone out there have any experience with the strain and trying to clone it? Easy/Hard??
Going hydro for the first time as well. Any feedback appreciated :)
Pics are of mother and clones I cut last night
well if the base strain of Haze all grows the same then I would have to say it has been pretty easy for us. Never tried growing the Super Lemon you are talking about but what we have is called Medi-Bud and have been growing it for close to 2 years now and is of the Haze line
Thanks for feedback, once I get super lemon into my new hydro I will post my good/bad results. Looking forward to my new hydro setup but I have lots to learn how to make it work. Thanks again. :)Quote:
Originally Posted by tinytoon
If ya need a hand with your system give a shout and I'm sure someone can lend a helpful hand :thumbsup:
Will do, I will post some pics once I get my new hydro setup with hopefully my clones in a few weeks. Just bought a new meter to check PH/EC/TDS so lots t learn and I will be back with many questions. :) Going from dirt to hydro, should be interesting.Quote:
Originally Posted by tinytoon
Just out of curiosity, what type of set-up are you planning on switching to?Quote:
Originally Posted by scottcc5s
I decided to go with a Ebb and Flow system (buckets) and 50 gallon reservoir, flexible for 6 to 12 plants. The bucket system worked better for my grow room vs. table(s). I have access with a good hydro store with lots selections and this one works best for me so will see. :)Quote:
Originally Posted by caregiver99
ahh so you gonna run the Ebb & Grow system. I have that running downstairs atm hehe. Most important thing bout that so far is make sure the controller box and your buckets are all at the same height (if 1 is on floor then all on floor, if 1 on milk crate ... so on), the rez can be wherever but buckets and controller have to be level with each other for proper fill/drain without putting your nutes and ph water on the floor :eek:
I grow SLH, no problems cloning ever.. I was dissapointed in the instablitly in the strain though, 4 different feminized seeds turned out 4 totally different pheno's with almost 0 similarities.
Here's an update and looking for feedback, I am 12 days into my first attempt at cloning. Up to this point I had them under a florescent lights in a closet and temp was about 65 to 70 degrees. Just moved them into my grow tent to get temperature up (75 or so). I also now have them under my 126 watt LED panel.
They have been droopy like this for last 5 days so not sure if it was from low temp and florescent lights so I figure I would just move them into grow tent and LED light.
Should I put plastic dome back on the tray to get humidity back up to 80/90% ?? If I leave off the plastic dome they will be in 40 to 50% humidity in the grow tent. Do they look typical for 12 days in?
Feedback appreciated :)
I went from being an outdoor guerilla farmer...to indoor hydro. It was a huge change!Quote:
Originally Posted by scottcc5s
Your clones looks really dry bro...put the dome back on...and make it humid in that...It can take from 3 days to 3 weeks before you start rooting.
Thanks for the feedback, put the dome back on. Will be getting my new hydro (ebb/flow) next couple of weeks.Quote:
Originally Posted by martyrprojekt
Thanks again :)