Easy Plant Problem Diagnosis!

Hey all, found this wandering the web today. Thought I would share!!! Props go to "Green Man's" Online Growing Library: Marijuana Growing Guide Free Library

Key on Nutrient Disorders

To use:, simply start at #1 below. When you think you've found the problem, read the Nutrients section (posted next) to learn more about it. Diagnose carefully before making major changes.

1) a) If the problem affects only the bottom or middle of the plant go to #2.
b) If it affects only the top of the plant or the growing tips, skip to #10.
c) If the problem seems to affect the entire plant equally, skip to #6.

2) a) Leaves are a uniform yellow or light green; leaves die & drop; growth is slow. Leaf margins are not curled-up noticeably.
>> Nitrogen (N) deficiency.
b) If not, go to #3.

3) a) Margins of the leaves are turned up, and the tips may be twisted. Leaves are yellowing (and may turn brown), but the veins remain somewhat green. >> Magnesium (Mg) deficiency.
b) If not, go to #4.

4) a) Leaves are browning or yellowing. Yellow, brown, or necrotic (dead) patches, especially around the edges of the leaf, which may be curled. Plant may be too tall. >> Potassium (K) deficiency.
b) If not, keep readingâ?¦

5) a) Leaves are dark green or red/purple. Stems and petioles may have purple & red on them. Leaves may turn yellow or curl under. Leaf may drop easily. Growth may be slow and
leaves may be small. >> Phosphorous (P) deficiency.
b) If not, go to #6.

6) a) Tips of leaves are yellow, brown, or dead. Plant otherwise looks healthy & green. Stems may be soft >> Over-fertilization (especially N), over-watering, damaged roots, or
insufficient soil aeration (use more sand or perlite. Occasionally due to not enough N, P, or K.
b) If not, go to #7.

7) a) Leaves are curled under like a ram's horn, and are dark green, gray,
brown, or gold. >> Over-fertilization (too much N).
b) If not, go to #8â?¦

8) a) The plant is wilted, even though the soil is moist. >>Over-fertilization, soggy soil, damaged roots, disease; copper deficiency (very unlikely).
b) If not, go to #9.

9) a) Plants won't flower, even though they get 12 hours of darkness for over 2 weeks. >> The night period is not completely dark. Too much nitrogen. Too much pruning or cloning.
b) If not, go to #10...

10) a) Leaves are yellow or white, but the veins are mostly green. >> Iron (Fe) deficiency.
b) If not, #11.

11) a) Leaves are light green or yellow beginning at the base, while the leaf
margins remain green. Necrotic spots may be between veins. Leaves are not twisted. >> Manganese (Mn) deficiency.
b) If not, #12.

12) a) Leaves are twisted. Otherwise, pretty much like #11. >> Zinc (Zn)
deficiency.
b) If not, #13.

13) a) Leaves twist, then turn brown or die. >> The lights are too close to the plant. Rarely, a Calcium (Ca) or Boron (B) deficiency.
b) If notâ?¦ You may just have a weak plant.

Solutions to Nutrient Deficiencies

The Nutrients:
Nitrogen - Plants need lots of N during vegging, but it's easy to overdo it. Added too much? Flush the soil with plain water. Soluble nitrogen (especially nitrate) is the form that's the most quickly available to the roots, while insoluble N (like urea) first needs to be broken down by microbes in the soil before the roots can absorb it. Avoid excessive ammonium nitrogen, which can interfere with other nutrients. Too much N delays flowering. Plants should be allowed to become N-deficient late in flowering for best flavor.

Magnesium - Mg-deficiency is pretty common since marijuana uses lots of it and many fertilizers don't have enough of it. Mg-deficiency is easily fixed with ¼ teaspoon/gallon of Epsom salts (first powdered and dissolved in some hot water) or foliar feed at ½ teaspoon/quart. When mixing up soil, use 2 teaspoon dolomite lime per gallon of soil for Mg. Mg can get locked-up by too much Ca, Cl or ammonium nitrogen. Don't overdo Mg or you'll lock up other nutrients.

Potassium - Too much sodium (Na) displaces K, causing a K deficiency. Sources of high salinity are: baking soda (sodium bicarbonate "pH-up"), too much manure, and the use of water-softening filters (which should not be used). If the problem is Na, flush the soil. K can get locked up from too much Ca or ammonium nitrogen, and possibly cold weather.

Phosphorous - Some deficiency during flowering is normal, but too much shouldn't be tolerated. Red petioles and stems are a normal, genetic characteristic for many varieties, plus it can also be a co-symptom of N, K, and Mg-deficiencies, so red stems are not a foolproof sign of P-deficiency. Too much P can lead to iron deficiency.

Iron - Fe is unavailable to plants when the pH of the water or soil is too high. If deficient, lower the pH to about 6.5 (for rockwool, about 5.7), and check that you're not adding too much P, which can lock up Fe. Use iron that's chelated for maximum availability. Read your fertilizer's ingredients - chelated iron might read something like "iron EDTA". To much Fe without adding enough P can cause a P-deficiency.

Manganese - Mn gets locked out when the pH is too high, and when there's too much iron. Use
chelated Mn.

Zinc - Also gets locked out due to high pH. Zn, Fe, and Mn deficiencies often occur together, and are usually from a high pH. Don't overdo the micro-nutrients- lower the pH if that's the problem so the
nutrients become available. Foliar feed if the plant looks real bad. Use chelated zinc.


Check Your Water - Crusty faucets and shower heads mean your water is
"hard," usually due to too
many minerals. Tap water with a TDS (total dissolved solids) level of more
than around 200ppm (parts
per million) is "hard" and should be looked into, especially if your plants
have a chronic problem. Ask
your water company for an analysis listing, which will usually list the pH,
TDS, and mineral levels (as
well as the pollutants, carcinogens, etc) for the tap water in your area.
This is a common request,
especially in this day and age, so it shouldn't raise an eyebrow. Regular
water filters will not reduce a
high TDS level, but the costlier reverse-osmosis units, distillers, and
de-ionizers will. A digital TDS
meter (or EC = electrical conductivity meter) is an incredibly useful tool
for monitoring the nutrient
levels of nutrient solution, and will pay for itself before you know it.
They run about $40 and up.

General Feeding Tips - Pot plants are very adaptable, but a general rule of
thumb is to use more
nitrogen & less phosphorous during the vegetative period, and the exact
opposite during the flowering
period. For the veg. period try a N:P:K ratio of about 10:7:8 (which of
course is the same ratio as
20:14:16), and for flowering plants, 4:8:8. Check the pH after adding
nutrients. If you use a reservoir,
keep it circulating and change it every 2 weeks. A general guideline for
TDS levels is as follows:
seedlings = 50-150 ppm; unrooted clones = 100-350 ppm; small plants =
400-800 ppm; large plants =
900-1800 ppm; last week of flowering = taper off to plain water. These
numbers are just a guideline, and
many factors can change the actual level the plants will need. Certain
nutrients are "invisible" to TDS
meters, especially organics, so use TDS level only as an estimate of actual
nutrient levels. When in
doubt about a new fertilizer, follow the fertilizer's directions for
feeding tomatoes. Grow a few tomato or
radish plants nearby for comparison.

PH - The pH of water after adding any nutrients should be around 5.9-6.5
(in rockwool, 5.5-6.1) .
Generally speaking, the micro-nutrients (Fe, Zn, Mn, Cu) get locked out at
a high pH (alkaline) above
7.0, while the major nutrients (N, P, K, Mg) can be less available in
acidic soil or water (below 5.0). Tap
water is often too alkaline. Soils with lots of peat or other organic
matter in them tend to get too acidic,
which some dolomite lime will help fix. Soil test kits vary in accuracy,
and generally the more you pay
the better the accuracy. For the water, color-based pH test kits from
aquarium stores are inexpensive,
but inaccurate. Invest in a digital pH meter ($40-80), preferably a
waterproof one. You won't regret it.

Other Thingsâ?¦

Cold - Cold weather (below 50F/10C) can lock up phosphorous. Some
varieties, like equatorial sativas,
don't take well to cold weather. If you can keep the roots warmer, the
plant will be able to take cooler
temps than it otherwise could.

Heat - If the lights are too close to the plant, the tops may be curled,
dry, and look burnt, mimicking a
nutrient problem. Your hand should not feel hot after a minute when you
hold it at the top of the plants.
Raise the lights and/or aim a fan at the hot zone. Room temps should be
kept under 85F (29C) -- or 90F
(33) if you add additional CO2.

Humidity - Thin, shriveled leaves can be from low humidity. 40-80 % is
usually fine.

Mold and fungus - Dark patchy areas on leaves and buds can be mold. Lower
the humidity and
increase the ventilation if mold is a problem. Remove any dead leaves,
wherever they are. Keep your
garden clean.

Insects - White spots on the tops of leaves can mean spider mites
underneath.

Sprays - Foliar sprays can have a "magnifying glass" effect under bright
lights, causing small white,
yellow or burnt spots which can be confused with a nutrient problem. Some
sprays can also cause
chemical reactions.

Insufficient light -- tall, stretching plants are usually from using the
wrong kind of light.. Don't use
regular incandescent bulbs ("grow bulbs") or halogens to grow cannabis.
Invest in fluorescent lighting
(good) or HID lighting (much better) which supply the high-intensity light
that cannabis needs for
good growth and tight buds. Even better, grow in sunlight.

Clones - yellowing leaves on unrooted clones can be from too much light, or
the stem may not be firmly
touching the rooting medium. Turn off any CO2 until they root. Too much
fertilizer can shrivel or wilt
clones - plain tap water is fine.

Sorry, the layout of that last post is kinda messed up, but should still be easy to read. Enjoy! :jointsmile:

Haha, is this benefitting anyone at all??

FIRCK yes, man good pooh. Excellent path.

This damn near needs a sticky. This is real good in my opinion.

Quote:

---

Originally Posted by WashougalWonder

FIRCK yes, man good pooh. Excellent path.

This damn near needs a sticky. This is real good in my opinion.

---

Thanks Wash, I was hoping someone would get some help from it. I think its set up very nicely for beginners...ya know... people like me :jointsmile:

Green Man still posting...? Seen his how-to video's years ago. They're all over the web if anyone's interested. Him and Marijuana Man were helped me learn growing and growrooms when I was a bit too paranoid to post online. (many years ago)

Never seen one, but a guide to common misdiagnosis conditions would be handy for beginners, too. For stuff like leaf-tip irritation causing damage to other leaves, leaving puddles of spilled nutrient solution on leaves which can cause burned/necrotic spots, or oversaturating the leaves (foliar spraying too much) causing a myriad of negative conditions, or leaving pest sprays without rinsing which leads to clogging a plants pores and preventing it's ability to breathe...All with reference pictures to aid the newbies.

(just a thought in case anyone is inspired enough to give one a go...;))

Quote:

---

Originally Posted by Rusty Trichome

Never seen one, but a guide to common misdiagnosis conditions would be handy for beginners, too. For stuff like leaf-tip irritation causing damage to other leaves, leaving puddles of spilled nutrient solution on leaves which can cause burned/necrotic spots, or oversaturating the leaves (foliar spraying too much) causing a myriad of negative conditions, or leaving pest sprays without rinsing which leads to clogging a plants pores and preventing it's ability to breathe...All with reference pictures to aid the newbies.

(just a thought in case anyone is inspired enough to give one a go...;))

---

I just might, on a rainy day. I may not be able to complete it with my experience... I trust that if I post an unfinished version people will help out and add info? :jointsmile:

Faddenator and Rusty,
Hell yes that was usefull... just found it. All of the feedback you two offer is great. I've gained many a restful nights sleep because of your posts. Keep it up and I'll keep learning.
Later,
GOG

PS... grow is doing well.... still fighting high N, eliminated it for a couple weeks, new leaves all came in green and straight for a couple weeks. Just watered and nuted 3 days ago (1/2 strenght from previous) and again getting new growth hooked leaves... aaarrrrggghhh. Will have to cut my nute down to 1/4 strength? They look real healthy other than that.

Thanks for the kind words GOG, I'm glad someone got some help from this.:thumbsup:

A lot of growth came in the same way for me on a plant of mine. My problem turned out to be a combo of over feeding, lack of light, and possibly over watering.

The curled leaves can also be caused by cramped roots, so I'd check those out.

What kind of nutes are you using, and how often are you feeding?
When was your last transplant or addition of new soil? hows the drainage in your medium? how often do you water? Do you have a circulation and exhaust fan moving fresh air around the plant(s)? These can all be major factors with your problem.

hey faddenator,
i have been doing research for years on this website for when I finally get to grow again. I have saved every bit of helpful information I can find and there is only one thing that always bugs me, wording. I honestly can say that this post is the MOST useful NPK solutions/ nute problem page I have came accross. This WILL help many people and I hope they make this a sticky note for EVERYONE to see when they first come to growing. Thank you man. more than you know, thank you

Quote:

---

Originally Posted by stickyinsalem

hey faddenator,
i have been doing research for years on this website for when I finally get to grow again. I have saved every bit of helpful information I can find and there is only one thing that always bugs me, wording. I honestly can say that this post is the MOST useful NPK solutions/ nute problem page I have came accross. This WILL help many people and I hope they make this a sticky note for EVERYONE to see when they first come to growing. Thank you man. more than you know, thank you

---

Glad I could help you out. I want to be sure I don't take any credit for the information, all I did was copy/paste it. But it was so easy to follow that I thought it would be prefect for first time growers like yourself.

Good luck with the grow, and thanks again for the kind words! :thumbsup: