2nd Grow - New setup

I'm now starting my second grow and grow log !

I just install my grow tent in my grow room, so now I can start a perpetual grow with a section for flowering and another for veg.

Here is a small list of my equipment:

1000W Ballast with a cool tube and a Hortilux bulb
6 inch Vortex 450 CFM with an Odorsok filter
A tent 48"x48"x78" - So I can have 16 plants.

I now have 11 plants, clones from my last grow.
9 of them have already been transplant from the small cup to 8 inch pot.
I'll take clone from the 2 best plants of my last harvest and I will keep a mother of these 2 plants.

so I see the vortex and the filter are attached to each other but how do you cool the light itself with the black tubes coming out of it?

does it have a separate fan attached to it outside somewhere?

The fan is sucking air from the filter and pushing it in the vent duct passing in the cool tube cooling down the HPS and then going out the tent, to an exhaust leading outside. The other fan I have in the tent is to move air around...

Ima gonna come steal that light and cool tube :D.

Nice setup and those plants look great so far.

darn! thats one cool setup!
gonna keep an eye on ur log man
u gonna get loads of weed out of that tent!
good luck

Quote:

---

Originally Posted by LuciferN

I'm now starting my second grow and grow log !

I just install my grow tent in my grow room, so now I can start a perpetual grow with a section for flowering and another for veg.

Here is a small list of my equipment:

1000W Ballast with a cool tube and a Hortilux bulb
6 inch Vortex 450 CFM with an Odorsok filter
A tent 48"x48"x78" - So I can have 16 plants.

I now have 11 plants, clones from my last grow.
9 of them have already been transplant from the small cup to 8 inch pot.
I'll take clone from the 2 best plants of my last harvest and I will keep a mother of these 2 plants.

---

it's lookin' good man but i think you need to re-think your air flow.

first, you don't need to filter the air for the light, you should set it up
so that cooler outside air is pulled in, across the light and vented out
the other side, no need to filter it.

then, you should set that vortex fan up outside the tent pulling the odor
infused air out and through the filter.

as it is now, you're just pulling outside air in across the light and through
the filter and pumping that air into the tent.

anyway, good luck man, i'm sure you'll work it out

Quote:

---

Originally Posted by justanotherbozo

it's lookin' good man but i think you need to re-think your air flow.

first, you don't need to filter the air for the light, you should set it up
so that cooler outside air is pulled in, across the light and vented out
the other side, no need to filter it.

then, you should set that vortex fan up outside the tent pulling the odor
infused air out and through the filter.

as it is now, you're just pulling outside air in across the light and through
the filter and pumping that air into the tent.

anyway, good luck man, i'm sure you'll work it out

---

If I pull air from outside it will create a positive pressure and the air will go in my apartment spreading the smell all over. The thing is that I exhaust the air outside... Maybe I just don't understand what you are trying yo make me realize.

Quote:

---

Originally Posted by LuciferN

If I pull air from outside it will create a positive pressure and the air will go in my apartment spreading the smell all over. The thing is that I exhaust the air outside... Maybe I just don't understand what you are trying yo make me realize.

---

lol, no, it's me. i just went back and rethought what you are doing
and i now understand, you're not blowing it out that filter, you're
pulling air in through the filter and then across the light and out, yes?

Quote:

---

Originally Posted by justanotherbozo

lol, no, it's me. i just went back and rethought what you are doing
and i now understand, you're not blowing it out that filter, you're
pulling air in through the filter and then across the light and out, yes?

---

ya im pretty sure I was confused at first too lol

Quote:

---

Originally Posted by justanotherbozo

lol, no, it's me. i just went back and rethought what you are doing
and i now understand, you're not blowing it out that filter, you're
pulling air in through the filter and then across the light and out, yes?

---

Quote:

---

Originally Posted by Revanche21

ya im pretty sure I was confused at first too lol

---

Sorry If I was not clear...
So my setup is: filter -> blower -> cool tube -> outside !

Hello everyone, I'm updating this log. Here is a picture of my babies !
I'll take some clones soon enough and after that I'll switch them to 12/12.

Quote:

---

Originally Posted by LuciferN

Hello everyone, I'm updating this log. Here is a picture of my babies !
I'll take some clones soon enough and after that I'll switch them to 12/12.

---

lookin purty!:thumbsup::jointsmile:

I've been quite busy at work and in my life... I have some time right now, so I'm doing a quick update. I've started flowering plants on the 1st of November, just check the picture for dates.

I'm feeding my plants with my EJ products with still some grow because they will stretch..

This is for a gallon of water :

1/2 Tbsp of grow
1 Tbsp of bloom
1 tsp of Catalyst
1 tsp of Meta-K

Here some picture of my ladies

v nice plants mate mine is so sad rite now finkin of startin again

those look real nice man, they're gonna fill up soon with some
big fat nugs. good for you man.

Here are some picture, I've check the plants and they are stating to really get root bound, so I've transplanted 2 on them. I'll will transplant more tomorrow.

should be a nice harvest there. :rasta:

Your dream looks like a wet one to me LuciferN. Does your exhaust run all the time of just when the lights are on?

Very sweet lookin plants.

Couple questions for you:

I've read that you can take clones 3wks into flower but it seems everyone does it before flower, is it ok to keep taking clones?

My plants are finishing week 4 of flower and some of the shorter, bottom branches are hardly flowering at all. Are these prime candidates for cloning?

Last but not least. Do you're clones ever develop purple stems before rooting? lol

Right now it always on... because I still need to exhaust the room for the clone/veg section of the room.

Thanks LuciferN.
Turbo~the best advice I can give you for your clones is just take em. If they don't work out, well your just out a few underdeveloped branch tips right. I've taken clones 2-3 weeks into flowering and had no troubles except for strange sugar leaf production that eventually went away. It all depends on the strain.

Quote:

---

Originally Posted by LuciferN

I've been quite busy at work and in my life... I have some time right now, so I'm doing a quick update. I've started flowering plants on the 1st of November, just check the picture for dates.

I'm feeding my plants with my EJ products with still some grow because they will stretch..

This is for a gallon of water :

1/2 Tbsp of grow
1 Tbsp of bloom
1 tsp of Catalyst
1 tsp of Meta-K

---

Lookin good so far. Are you feeding with every watering or what?
Time for an update, you must be as busy as I am.