hellpp my girlll

H=Answer if you grow hydro or aero
C=Answer if you grow coco
S=Answer if you grow traditional soil
L=Answer if you grow soilless other than coco (Promix, Hyponex, SunshineMix)
R=Answer if you grow in RockWool
T=Answer if you grow in HydroTon
D=Answer if you run any type of automatic drip system, including into soil or soilless
E= EVERYONE needs to answer lol!


E-indoor
E-soil,
E-manure and homus and perlite i did the 2 to 1 mix sticky said to
CSL-manure homus
HCL-Hydro/aero/soilless system type
SCL-perlite water and pure blend pro grow
SCLR-i havent actually been messing with ph?
E-tap steady 7 ph
E-7
HRT-Source water EC (if hydro)
E-52 days?
E-pure blend pro grow
E-1 tablespoon per galon
E-ill take some pics but i have a 400 watt mh and 2 small flouresant grow lights and a bigger flour grow light
E-its about 80 during the day and 72 at night
E-i really dont know i have an ac goin in through a trash bag its basically like a tube and then i have a fan blowing that air back at the plant
E-18-6 but flours 24
E-fans and ac
TR-no?

ok so i forgot to mention that i sexed her along with 3 males who were all killed, that was for a week and a half but i switched back to 18-6 after that i was using the hps when i switched to sex here are the pics see the leaves? not doing wellll

wait so your HPS is running on 18/6 but your flouros are on 24/0 ? That is probably confusing the buh-jesus out of your plant...Not a good idea

Your pH seems a little high to me

And why are there next to no leaves on this plant?

no no no no, when i switched it to twelve and twelve for 2 weeks i switched it to the hps its been the mh 400w for all of the vegetative 18-6 and thats not the ph of the solution its the ph of the water, the tablespoon of pureblend is was bringing my ph down to about 6 with my hydro bucket so i figure it should be good, and im not sure about the leafage

oh all right

then it looks like you're going to need an expert, I have no idea...

it could just be really weak genes too...you might have a runt

ha im mildley retarded ok sorry to mention, this is a cloan from a friends plant, his plant was pretty good strain tho he got about 4 ounces from it

I'm not sure I totally get the whole picture here... but why did you have to sex the clone if you knew it came from a strong female plant?
And there is a difference between guessing something is fine... and knowing something is fine :rasta: A full point off in pH can really funk things up. A pH of "probably 6" does not equal 6.9 :hippy:

But yeah... so why did you sex the clone?

Edit: I just looked at your pictures again. I can't seem to even see a single speck of perlite in your soil mix. Did it run away? :jointsmile: If that's tin foil... it's probably doing more harm than good. Flat white paint seems to be the most user friendly. Is that a tray under your pot? You don't want any drainage water hanging around. Soil looks like it's very soggy too. How often do you water and how good is the container drainage? The leaves look a bit droopy, which could be overwatering. What's your exhaust like? Are you guessing the temps or do you have a thermometer in there?

And WTF is that first picture of? I think I kinda see an arm? :wtf:

the first picture is of the trashbag airvent i made and i dont have a thermo in there but im sure its under 80 most of the time, and there is perlite in there i mixed a shit load of soil with perlite 2:1 bag ratio like it said and then i took just enough for the one pot, it seems to me like there could be some problem with this soil although i did buy the recommended and even drill holes in my pot so yeah theres good drainage, i was sexing the other plants, i had 3 unknowns in a my hydro bucket, they all turned out male and obviously its not tinfoil lmao its fricken milar i had it taped up better before but when i moved the shelf above up and moved the other stuff in it came off, and i realise i should check the ph but its such a pain with the soil i just havent gottten to figuring out an accurate method, i really want to get back to hydro, its soo much better, but i dont wanna give up on this lady

Way over-watered, and way under-lit.
You say you are using a 'hydro bucket' plus my manure-humus mix? That looks all wrong- it's supposed to have a LOT of perlite in it for lightness and drainage, but I don't see any at all. And if you are in hydro, why is there dirt in yoru system?

nooo ok, the hydro bucket had 3 plants in it, it had hydroton and they were all males, the remaining plant is in soil, 2:1 manure and hums to perlite, i took that from your guide stinky, and how close should i have the 400w mh to the plant?

ok so i moved the light down closer to the plants, the smaller plant has already shot off some hairs toward the middle so suprisingly i have 2 females even tho they are both in rough shape, and im gonna let the soil dry out well before watering again but ive been making sure to mist water on it
edit: ok so i have found the obvious problem with my soild to perlite ratio, see i thought it meant 2 bags of manure and humus to 1 bag perlite but its really 1 bag to 1 bag perlite there is less perlite per basg

Don't mist them- they should not need it.
I still don't actually see ANY perlite in there. Did you mix it, or put all the perlite on the bottom?

ok there is defff perlite in there i mixed it in a big box lookiee

ok so ive taken some more pictures, im still not sure exactly wat the problem is, there hasnt been much new growth in a bit of time, she doesnt look wicked happy please anything to help :\

alright so its been a litttle bit, the plant is surprisingly still alive i found that there was some pretty intense root rot but i cleaned it thoroughly and changed the soil adding more perlite so hopefully this will help here to revive herself somehow :$

alright well, my battery on my top is low so ill put more pics up later but it seems to be recovering a bit, the problem tho is that the plant seems to be continuing to flower even tho it has been on 18 and 6 for about 2 weeks, any thoughts?

It takes quite a while- like a month or so - to revert to full veg.
What do you have for drainage in that bucket? 5 gallon pails need to have a lot of holes, fairly large ones, not onlt in the bottom but also the sides- or if you don't want to do the sides, actually have the whole bucket up on some blocks so it is free-draining. But I ALWAYS punch side drains too with a 1/2" spade bit. Prevents root rot and gives the amount of oxygen flow that a living compost really needs to be beneficial.