Printable View
Hey fellow toker's & grower's :thumbsup: a quick question on lighting . my grow room is 4ft x 4ft x 7ft & if i used a one 1000 watt hps blub with a cool tube vent , would i have enough lighting for 9 northern light plants 2 give me a decent yield ? of course i know my yield depends on a lot of things : temp , humid , nutes & additives , co2 , but is that enough lighting for the space i have & how is that determined ? thank's for any input :D smokedaddy :rastasmoke:
A 1000W HPS would be sufficient enough for nine females. Especially since you're growing in a pretty confined space. Be sure that you are reflecting as much light as possible, either via Mylar or flat white paint. You can probably expect at least 1oz. or more per plant from Northern Lights with decent ventilation, a good nutrient regimen, and plenty of reflected light.
The biggest issue you might have to deal with will be limitations on space. NL is mostly Indica, and will likely grow bushy, as opposed to vertically. You can learn more about thinning & training your plants to get the most out of the vertical space available.
A 1000W fixture will generally supply enough light to cover a 6.5 foot by 6.5 foot grow area. (30 plants or less) But, as with everything, results will vary depending on your own circumstances.
thanx 4 the reply mr. clandestine , but only an ounce per plant huh ? all the research i've been doing on northern lights say that i can get bout 450 - 500 grams per plant . what could i do to increase my yield ? i've spent a lot of $ on nutes , light , hydro system , meters , co2 system , hydohut , fans , exhaust & intake blowers & all i'm going 2 get is just over a half pound ? ol well that well last me until next havest ! :thumbsup: thanx for the info mr. clandestine :D u guys know more bout growing than i do :thumbsup: smokedaddy :rastasmoke:
you can always lst and do a scrog, or a combo of both, with nine plants it should greatly increase your yield, again, other factors considered such as fim, topping, etc. if you arent familiar with scrog do a search for justaseed's thread called "Lovely Ladies". He used 2 or 3 plants and got, i think, 12 oz. Best damn scrog ive seen.:thumbsup:
Nevermind, heres a link to it http://boards.cannabis.com/closet-ca...ly-ladies.html
1K watts is good for 9 plants. It's a little overkill for your space though. Your space is good for 600 watts, but if you can keep it cool, of course 1000 watts is even better.
thanx for ur comments trynagethigh & opie yutts :thumbsup: WOW !! :D trynagethigh that grow (lovely ladies ) is awsome :D thanx for the suggestion & the the idea :thumbsup: will try with my next harvest :jointsmile: smokedaddy :rastasmoke:
An ounce, dry weight, is what I was referring to...and I wasn't saying you couldn't get a larger yield. If you end up with nine females, you could be end up with a ridiculous amount! But it'll be tough fitting nine fully grown females in the space you have available...and I figured you'd end up weeding out some males, slow growers, etc.
You could just transplant one female into a huge container, vegetate her forever, and harvest a pound...or more. This would be much easier done outside, but the point is, you control the end result. You seem to have everything you need to grow some nice plants. As long as your environment is controlled and maintained, you should have nothing to worry about, and will soon have a success story of your own.
Opie & tryn both made great points. Spend a little while researching ways to maximize your yield on these forums. You might get lost, like I did!:) (And trynagethigh, that scrog grow was pretty damn impressive!) Also, if you have another light that could vegetate a mother plant and keep her healthy, think about a starting a sea of green, and getting a continual harvest every couple of months.
Either way, have fun and good luck on your grow!:rastasmoke:
That's what I was going to say....Quote:
Originally Posted by Opie Yutts
Also, I've grown around 9-10 plants in a similar sized closet with only a 400w light and got about 1-1.5 oz. per plant. I was growing in soil too. I think with 600w and hydro setup you should be able to pull at least 2oz per plant. That's over a lb each harvest, and if you set up a contiuous harvest system....geeze that's plenty of smoke!
thanx guys :thumbsup: this site is awsome :jointsmile: all u guys have been real helpful & friendly to this noobie grower :D mr. clandestine , u were right , u CAN get lost in the fourms ( & i did , such a stoner LOL :jointsmile: & i never doubted u as far as my yield just bought into what the seedbanks were saying bout thier products , should have known better :mad: ) opie & dylan , question , 1000 watts overkill ? i thought u could never have enough light ? not that i doubt anyone on this site ( more growing experience than me :thumbsup: ) but i want real dense buds so wouldn't a 1000watt hps blub be what i'm looking 4 ? more light = bigger denser buds right ? i just want te best bud i can grow :thumbsup: tired of all the bullshit bud in my area :mad: & want good quality ;) thankx again 4 all ur help :jointsmile: as this stoner is actually starting 2 learn some things LOL smokedaddy :rastasmoke:
Yes of course, like I said 1000 watts would be better, it's just that most people would probably do 600 in that space. 1K watts will get real hot, and it will heat up that space real quick. You will need to spend a bunch more money on ventilation than if you went with 600. Of course 1K will cost much more in electricity. Also don't forget that besides the initial added cost of the bigger ballast, bulbs last a year or less, and the bigger they are the more they cost.
If you want big dense buds then grow a variety that produces those, and use a hydroponic grow method with the proper nutrients.
you have a cool tube(or will get one), you already have some of the heat issue whooped. it is known that mj can grow in as little as 30w per square foot, also that most people try for around 50w per sq.ft. for the best results. i try for 40w a happy medium. i dont use co2 but if you do the temps can be a little higher. it will come down to a live and learn thing. you wont want to vent with a co2(unless timed) but that is what the cool tubes do, only suck out heat but not your room air. ok, im no pro i only learned by reading, and this was an article in HT. but im sure you can find the info you need if you study a little bit.
i agree w/opie, proper ventilation is key....safety is #1
also make sure you aren't overloading a circuit, you don't want to be popping fuses espeically if you're in a place w/old wires/fuses you're taking a big risk if you overload
here's how to do the math
in the US every outlet is 120volts....now your fuses are rated in amps, the plug you plan on hooking the light into find out which fuse it is on and then look on the fuse switch itself and you will see how many amps it is ... typically 15-20 is normal for a standard room.....now take the volts x the amps to see how many watts you have available to use.... what I do is this I do 100 x the amps....why 100? well, it's easier to do the math in your head and plus you leave yourself a little safety headroom
say you have a room on a 15amp fuse....15 x 100 - is 1500 --- so 1500 watts available to use
now make sure on this fuse you dont have things like toasters, microwaves, hair dryers, a refridgerator..... when these devices click on they typically have a big spike and can pop fuses
good luck,
be safe