I donā??t know where one draws the line between do-it-yourself and professional construction. As a professional builder who is skilled in most of the trades, building this cabinet was pretty straightforward ā?? a lot of work but nothing very complicated. This might be a little advanced for someone with no construction skills. But if you can cut a piece of wood straight and pound a nail without bending it, you should be able to put something like this together.
In deciding on where and how to build this grow cabinet, a number of factors were taken into consideration. Primarily these factors were stealth, security, and functionality. I decided to build using a good quality standard of construction, essentially building a cabinet that not only fit my purposes but would also be impossible to break into without creating general havoc.
This cabinet would have been a lot easier to build if I had simply built walls from the existing floor and ceiling. However, I wanted a drain system, which required raising the floor, and I needed storage space in my garage, so the roof of the cabinet had to be strong enough to support a lot of weight.
First thing you have to do is find a spot to build your grow-room, then move all the ā??stuffā? out of the way.
Next you put up the first board. This is the hardest part; itā??s all downhill from here. LOL Actually, this first board is quite important because it "locates" everything else that follows. If you put this board in the wrong place, you'll have problems later on.
