THC coated rolling papers

ok i was baked and ive started on yet another "invention". listen:

theoretically couldnt i take some thick hash oil and some clear rolling papers and very lightly coat the papers with the oil then dry the papers and roll joints with it?

if youve never had experience with clear papers they are almost like real thin plastic and just as mallible as plastic and could support a very light coating of THC oil. so these could work but the paper ones wont.

the only concern would be how it burned. there would be a LOT of resin buildup so you could only make it 3/4 of the way down or so before you started to hit some heavy buildup.

any comments, suggestions, or insights are appreaciated while i continue to work on my experement. once i find a way that works then ill let you all know :rastasmoke:

That'd be awesome.

the paper papers (lol, i can't believe we have to say that now) do, and can suppport honey oil (pretty sure that's what you call hash oil.... just a diffrent name) i hav eexpereience in this as i've done it quite a few times.. i love coating a paper in honey oil before i roll a joint... the coughing pisses me off (it ain't just me either, anyone who's tried with me ended up coughin on every hit... I NEVER COUGH ANYMORE unless i take som ehuge ass hit...) but the power of said joint is fuckin huge lol...

i too agree that would be awesome, id buy it if they were legal or id make it if i get a recipe for it:D

thanks for letting me know that the paper papers (lol!) do support honey oils. that actually helps me a lot. thanks :)

well im still trying to figure out how to do this, what would be the best way to cure the papers? should i lightly coat one side and then put it in the freezer for 10 minutes then do the other side and repeat?

im baked right now and ive went through like a book of papers and theyre really sticky and i cant get em off!!!!

again any help is appreaciated

curing i have no idea... i mean curing process differ from chemical to chemical lol... certain adhesives need heat to cure, while other things need to sit in room tempature for a month (namely concrete) while others need to be pu tin cold ass tempatures to cure...

you'd definately have to coat or cure these papers with something.... cuz honey oil is more sticky then duck tape... and a pack of honey oil papers would just be a clump of honey oil covered block of papers lol... maybe flour or some kind of non toxic powder coating?

i've tried this using a normal zig zag and wiping the inside of a vapor globe and then we just let it dry over night.. works great as long as they stay flat.

Use the alcohol method to makes hash, but rub the THC laced alcohol on the joint, alcohol will evaporate leaving thc in the paper. (theoretically)

Quote:

---

Originally Posted by slipknotpsycho

curing i have no idea... i mean curing process differ from chemical to chemical lol... certain adhesives need heat to cure, while other things need to sit in room tempature for a month (namely concrete) while others need to be pu tin cold ass tempatures to cure...

you'd definately have to coat or cure these papers with something.... cuz honey oil is more sticky then duck tape... and a pack of honey oil papers would just be a clump of honey oil covered block of papers lol... maybe flour or some kind of non toxic powder coating?

---

alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!

ive seen joints with the paper being hash once on some site u just press it into thin sheets after u bubble bag it...looked sweet but best to put the oil inside of the paper thatway it all dont burn off and use a thicker paper

Quote:

---

Originally Posted by Jimbob1310

alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!

---

DO NOT DO THIS IN YOU RHOUSE OR A CLOSED ROOM, DO NOT DO THIS ANYWHERE NEAR SPARK OR FLAME... DO NOT SMOKE DRUING THE PROCESS... YOU CAN LITERALLY BLOW YOURSELF UP... (i have to add my warning... with proper caution it's completely safe, but if you ignore saftey, of course you can end up paying some ultimate price... a limb or your life... so just be careful.... if you're doing it anywhere near anyone (i had a friend around) stress how no playing, no sparks or no flame sources is extremely important... like i said, safe when done safely, deathly when ignoring the saftey...

there's a couple actually, both are the same, just the device that holds the weed differ....

one, get a bic pen, hollow it out, (gotta have to ends, the coned ones...you know the writing side) grab a can of butane (only one i know for sure is safe [some have additives] and put a lighter to the tip of the end to get it nice and soft, then push the tip of the butane in it (without actually discharging the butane) so it's the right size... stop it about half way in (so the tip will have something to push against, to discharge the butane)

now, take that pen, put one tip in it (the one not modified) and pack weed in the pen as tight as you can (the finer grounded the better too) once you barely got enough room to stick in that 2nd tip, do so.... grab a plate [must have high edges, a bowl will work to, but they tend to be harder to scrape] (high quality highly recommended, you're gonna need something flat as fuck, with no real blemishes, or you're gonna have a bit of work to do, or gonna ose alot of your work)

hold the tip over the center of plate/bowl, and put the butane tip into the tip you melted earlier, and press, discharging the butane... now this next part, it's not exaclty easy to see so keep a sharp eye.... at first, liquid will come pouring out with a very slight yellow tint... (make sure nothing spills over the edges... if it's about to spill over, pause a second and wait for some evaporation) keep pushing butane through til the liquid coming out is COMPLETELY clear...

let the butane evaporate (doesn't take long at all) and scrape up the remaining witha razor blade... there's your honey oil.... after you got it scraped up, grab a paper, and apply it gently like you would apply butter to a peice of bread... it helps if you but a lighter to the side opposite the blade (the part you hold) for a few seconds... just the slightest heat makes that honey oil extremely easier to work with...

oh yeah, the pen method gives you about enough for one paper coating... the other method i know of requires atleast an oz of weed.... but gives you alot more (not alot, ust alot more lol... an oz might, MIGHT yeild about a half a pill bottle's worth, but i highly doubt you'd get that much...)

Quote:

---

Originally Posted by Jimbob1310

alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

---

You could use two things in the place of the flour. One is grind a small amount of weed to a powder, as fine as you can, then sprinkle the coated paper with it. Or use powdered graphite. Take a pencil, and scrape its tip with a knife until you get the desired amount. The graphite is harmless when burnt, as it is pure carbon, which is converted to CO2 during the burning.

I think the cold would make the oil harder, so its a good choice for curing it.

Quote:

---

Originally Posted by Jimbob1310

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!

---

That recipe posted by slipknotpsycho is very good. But if you want know another way to doing it, look at:

http://boards.cannabis.com/recreatio...-hash-oil.html

Note that hash oil is another name for the same thing.
So, good luck and tell us if you succeed! :thumbsup:

wax paper:thumbsup:

Quote:

---

Originally Posted by slipknotpsycho

DO NOT DO THIS IN YOU RHOUSE OR A CLOSED ROOM, DO NOT DO THIS ANYWHERE NEAR SPARK OR FLAME... DO NOT SMOKE DRUING THE PROCESS... YOU CAN LITERALLY BLOW YOURSELF UP... (i have to add my warning... with proper caution it's completely safe, but if you ignore saftey, of course you can end up paying some ultimate price... a limb or your life... so just be careful.... if you're doing it anywhere near anyone (i had a friend around) stress how no playing, no sparks or no flame sources is extremely important... like i said, safe when done safely, deathly when ignoring the saftey...

there's a couple actually, both are the same, just the device that holds the weed differ....

one, get a bic pen, hollow it out, (gotta have to ends, the coned ones...you know the writing side) grab a can of butane (only one i know for sure is safe [some have additives] and put a lighter to the tip of the end to get it nice and soft, then push the tip of the butane in it (without actually discharging the butane) so it's the right size... stop it about half way in (so the tip will have something to push against, to discharge the butane)

now, take that pen, put one tip in it (the one not modified) and pack weed in the pen as tight as you can (the finer grounded the better too) once you barely got enough room to stick in that 2nd tip, do so.... grab a plate [must have high edges, a bowl will work to, but they tend to be harder to scrape] (high quality highly recommended, you're gonna need something flat as fuck, with no real blemishes, or you're gonna have a bit of work to do, or gonna ose alot of your work)

hold the tip over the center of plate/bowl, and put the butane tip into the tip you melted earlier, and press, discharging the butane... now this next part, it's not exaclty easy to see so keep a sharp eye.... at first, liquid will come pouring out with a very slight yellow tint... (make sure nothing spills over the edges... if it's about to spill over, pause a second and wait for some evaporation) keep pushing butane through til the liquid coming out is COMPLETELY clear...

let the butane evaporate (doesn't take long at all) and scrape up the remaining witha razor blade... there's your honey oil.... after you got it scraped up, grab a paper, and apply it gently like you would apply butter to a peice of bread... it helps if you but a lighter to the side opposite the blade (the part you hold) for a few seconds... just the slightest heat makes that honey oil extremely easier to work with...

---

damn my drunk ass, i forgot a few points lol...

first there are a couple of butane extraction methods (there ar ealot of others, butane is the absolute fastest) next, i meant two pen tips (i said something like "to pen tips") third, i forgot to say the name of the butane.. i meant to say Ronson butane... (there are methods of testing if a butane is safe to use, if you can't get your hands on Ronson say so and i'll post the test)

any other method is the 'safest' but any of them take FAR longer then this method... even boiling out alcohol takes up to 20-30 mins atleast... evaporating butane takes less than 3 minutes (depending on the ammount... for OZ extractions, it's closer to 30 mins) just gotta be safe... no one method is actually better then the other... if one's faster, it poses more of a risk...

We wipe out our 1 gallon jars we cure in w/ papers n smoke fattys w/ em .
Peace
Crispi :jointsmile:

Quote:

---

Originally Posted by one.stoned.wookie

ive seen joints with the paper being hash once on some site u just press it into thin sheets after u bubble bag it...looked sweet but best to put the oil inside of the paper thatway it all dont burn off and use a thicker paper

---

i was going to completely coat the papers with the oil

update: getting a batch of hash oil going in a few hours, i MIGHT have something useable by tommorow :rastasmoke: ill let you all know

If i've got enough oil i'll just roll a j and then dip it in and hang it and let it dry. Or i roll the buds in it and then let them dry. BUt it's a good idea