Help For Making a Bong

So I have this idea to make a bong out of a redstripe bottle and im pretty determined to do it...only problem is i really dont wana fuck it up. so any help or advice would be appreciated.

if anyone has any ideas or suggestions i could use em, anything at all really.

what do you mean advice? like you wanna know how to make it? just burn a hole about 1/4 the way up from the bottom and stick a metal pipe through theire and put a bowl on the end of the pipe, and about 3/4 th way up make a smaller hole to put you thumb over. seal the stem into the bottle with electrical tape and hot glue. same with the bowl onto the stem. a good bowl is a socket wrench thing. (ya know, those cylinder shaped metal things)



you can go here for a more detailed explanation
http://www.weedguru.com/bong.php

yeah what about using multiple bottles, whats something i could use to connect em that would work well...and what would be the best thing for me to use in order to have a rubber stopper there so i could just take out the bowl, thats what i was hoping for

what about drilling a hole? just using a coolant and everything?

ok you want help, post a pic of the bottle or something...i dont' know if i'm working wtih metal, glass or plastic here.

as for the bowl, to take it out easily you need to make a bowl/slide assembly which is a tube that will be stuck in the bong, and be big enough for the bowl/stem asembly to fit inside, but not so loose it lets air come in

Look for a drill bit made for glass. And use real bong parts from a headshop, u'll be glad u did. Red Stripe is some powerful shit, one of my favs.

http://www.beerking.com.au/Images/red%20stripe.gif
its 12 oz, glass

then you need tape, a drill and prererably a glass drill bit (regular will work, i think on low speed for both) and a bottle to apply a slow stream (not drips but not dousing it in water either) use masking tape and apply a few layers over the are to be drilled (completely around the bottle but the middle of the tape should be about where you wanna drill) once done, secure the bottle so it doesn't roll, pick up the drill in one hand and the bottle in the other, start the stream of water on the spot to be drilled and start drilling, go slowly, the faster you press it and with more pressure the chances increase of breaking.