First LOG 1000W flood and drain
first indoor grow with 1000 watter just want some feed back on my setup and plants.
I am running
4x4x8 room covered in poly white
diamond 1000 watt metal halide bulb and ballast 18 on 6 off
200 cfm inline fan with carbon filter
water farm hydro ebb and flow set up w hydroton
oscillating fan
nutrients
7 gallon res with a base tds of 38 (fresh spring water)
1/4 tsp per gallon of foxfarm growbig and super thrive
ph level at 5.6-5.8
my light cycle is 18 on 6 off
my water cycle as of now it 4 times daily, when light comes on, middle of light on, and right before it shuts off. the pump fills the tray in 15-20 min cycle
got some pics of the room/set up and little girls i hope, started from seeds in humidity dome
feel free to post suggestions, thoughts and ideas
First LOG 1000W flood and drain
First LOG 1000W flood and drain
First LOG 1000W flood and drain
First LOG 1000W flood and drain
First LOG 1000W flood and drain
First LOG 1000W flood and drain
Looks good. Should get some nice, tight nodes with that 1000 watter.
First LOG 1000W flood and drain
They are around 12 days into the grow room with the 1000w the light is about 4 feet above the plants, when do i lower the light, how much do i lower it and is 4, 30 min feedings 1/4 tsp foxfarm grow big a day ok as of now?
First LOG 1000W flood and drain
Hey, just curious, because i'm setting up an ebb&flow as well
Do the containers need to be completely filled with hydroton? Or can you use net buckets on top to have roots hanging in the air?
First LOG 1000W flood and drain
IMO I think you have too many plants in that area.... you'll find smaller bud production and a crowded room.... I tried to grow 17 in a 4X5 area and ran into the same problems...
