Easy way for making hash oil
Quote:
Originally Posted by joeiskrunk
Hello Coelho, I was just wondering if using 14 grams of vaped weed and maybe adding some little extra amounts to it would yield at least a half gram of honey oil?
Im almost sure yes, as the weight of hash oil i usually get is about 1/10th of the weight of the weed i start with.
Quote:
Originally Posted by joeiskrunk
I would like to use the Butane extraction with the PVC pipe draining into the Pyrex glasses but was also wondering if the isopropyl alcohol or butane extraction is more effective?
Well... i dont know. I never did a sucessfull butane extraction (i tried it once but the weather here where i live is way too hot), so i cant compare it with the other solvents.
Quote:
Originally Posted by joeiskrunk
I live in northern midwest and its getting somewhat cold out would this effect the butane if im doing it in weather outside around 32 Farenheit? I would love to hear some advice.
If i remember rightly, the butanes boiling point is around 40F, so it would take a lot of time to evaporate. It would help a lot the extraction process, as the weed would be soaking in the liquid butane for a longer time, allowing a more effective extraction.
I would suggest you to do the extraction outside, until you fill the pyrex glass with the liquid butane+oil, then go to a warmer place to evaporate it.
Just remember to evaporate it in a place far away from heat sources, sparks, flames, cigarretes, or anything that could ignite the butane fumes, as it is VERY flammable and could easily cause a fire or an explosion.
Easy way for making hash oil
i tried the butane extraction outside and it was cold as hell and out of all 14 grams of the vaporized weed i only got a few highs off of it because the layer was so thin it took forever for me to scrape it... i eventually rubbed joint papers over it and vaporized those which worked out quit well.
Because of my disappointment in the butane extraction i bought as ounce of some mids that encouraged me to try the isopropyl alcohol method. I am currently at the stage of slowly slowly waiting for the isopropyl alcohol to evaporate. If you happen to get with within the next few days could you tell me a safe method to speed the evaporation of the isopropyl. I have been putting in on a coffee machine to warm the liquid to speed up evap. a little.
Would putting boiling water around the glass container speed up significantly since i cant use any flames?
Appreciate the advice,
Joe
Easy way for making hash oil
Yes, putting boiling water around the solvent you want evaporate can make it way faster. When i make hash oil i put a wine glass with acetone (the solvent i use) into a pan with water, and heat it with an electric heater, so the water boils and heats the acetone. Doing so i can evaporate half glass of it (1-2 oz) in about 10 minutes.
How long did you let the weed soaking into the isopropyl alcohol? For making a good exctraction, which get the most of the weed, i must soak it in acetone for about one week. And the acetone dissolves the cannabis resins faster than the isopropyl alcohol, so for making a good extraction you should let it soaking for at least one week.
Easy way for making hash oil
hey i used boiling water to heat the isopropyl alcohol off and it worked very well. I boiled the water and then brought the water to a diff room where i set a glass container with the "stuff" in the water. A fan directed at the water by the window blew out the evaporated isopropyl alcohol.
I got a huge glob probably inbetween a half and full gram but i also have the weed soaking from the same batch that has been in the dark for about a week now. The liquid is just as dark if not darker that the other stuff haha.
How are your preferred ways of smoking it? For me a drop or two on some weed in my hotbox gets me pretty high. And for buying the ounce for 75 it turned out pretty nice.
Do you have any idea if the BHO extraction makes the honey taste different?
Easy way for making hash oil
best method to make oil is with butane PERIOD ...
Easy way for making hash oil
Quote:
Originally Posted by darkside
Link fixed! :)
Eden Labs LLC
Easy way for making hash oil
since ancient times alchohol has been made with grains etc....probably one of the oldest solvents / drugs used ....it has also been used from waaay back as a way to make tinctures....stands to reason that if you can use it to make essential oils (hash oil),it was likely done with weed by cavepeople !
organic method of oil extraction....
1.USE everclear...straight grain alch.....no additives...evaporates readily
2. soak weed in jar 48 hours ...use enough alch. to cover ground up weed.
3.separate fiber from 1st cut oil by filtering it thru a coffee filter lining a strainer
4. Repeat filtering as many times as you feel necessary...one more time works for me.
5.a safe and organic way to eliminate the alch is to put the liquid from secon d filtering into a pyrex pie pan and set it out in the sun on a warm SUNNYsummer day or two ...i put it on the dash of my truck .....crack the windows a few inches to vent....
scrape the goo-oil and toke....works well on a paper after you twist one up !
opthalmic solution bottles hold ten grams ...and make real nice containers... i had only one from a prescription so i don't know where to get them...maybe a new product for someone on the retail end (?)
Easy way for making hash oil
[quote=Coelho]I have been reading the posts of this forum about hash oil, and seems the people thinks making hash oil is somewhat difficult, even dangerous. I dont know what recipe you are using... anyway, i made hash oil with a easy and cheap technique, and with good results. I would like to put some pictures, but unfortunately i have not even a webcam :( and sorry for my english... translating while half baked is not nice :stoned:
Ingredients:
- Weed
- Acetone (nail polish remover)
- One small glass bottle
Instructions:
Even if there is contradictory opinions about decarboxilating weed in this forum, from my experiences it seems to work very well, so the first step is decarboxylate the weed. It can be done by several ways.
You can follow the Master Wu's technique:
"2. Place in a shallow pan (a sheet of aluminum foil works great) and bake at 325°F for 5 minutes."
(http://boards.cannabis.com/recipes/8...-combined.html)
Or the boiling water technique:
"The potency of marijuana can be increased by about 50% simply by simmering a water slurry of the material for 2 hours. Add water as necessary to maintain the level. Dry the leaf material at low heat."
(from Robert A. Nelson: Hemp Husbandry ~ Cannabinoid Chemistry (Ch 6))
Or just microwave the weed for some 5 minutes. This last technique (microwaving) were not tested by me, but there were people which did it and said it worked.
Anyway, after the weed were decarboxylated by any of this techniques (if you dont want decarboxilate your weed, start from here) it must be grinded. If the weed were "cooked" in the decarboxylation precess, it will be much easier to grind, as the weed will be crunchy and dry.
Put the grinded weed into the glass little bottle. Add the acetone to it. The volume of the liquid must be about 2 times the volume of weed in the bottle (see figure 1 below). Close the bottle very well (as acetone is very volatile), and shake it vigorously. Let it in a dark place for 1-2 days. It will allow the THC to dissolve in the acetone. (it must be a dark place, cause light decomposes the thc)
Remember the acetone is a VERY flammable thing, so all the steps must be made far from fire or heat sources. An important thing to consider is the purity of the acetone.........
-----------------------------------------------------
Chemicals - petroleum - do NOT belong in cannabis!
Propene is produced from fossil fuelsâ??petroleum, natural gas, and, to a much lesser extent, coal. Propene is a byproduct of oil refining and natural gas processing.
https://en.wikipedia.org/wiki/Propylene#Production
Alcohol and CO2 extractions NOT "BHO" or ANY FOSSIL FUELS should be used TO EXTRACT ANYTHING that will go into your brain and body.
I am aghast to see acetone even allowed to be voiced as a solvent that is SAFE for the human body.
I am dying from doctor inflicted chemical damage - you people, some of you, seem to want to be in the SAME boat I am in with 24/7 pain and more....
I don't suggest it.
Easy way for making hash oil
Making concentrates is a tough job....
Easy way for making hash oil
Hi I have a question if anyone can help me i'd appreciate it. I followed the instructions using pure acetone(product is called acetone and couldn't find any other ingredients listed) Home Depot Canada < that exact product. roughly 250 ml for 10 g of high end shake. The evaporation process I had windows open through out my apartment fan blowing directly on acetone by wide open window.
I only put a little bit at a time(of the green acetone) and let it evaporate then add more and repeat. It was all evaporated in only 2 hours! Without adding heat on my own. I haven't smoked it yet I'm waiting a couple of days but I think it is ready. Weather outside was 0 degrees Celsius. Is there an explanation for this? I was preparing to do it for a day or two... Now i just have a fan blowing on it but i think its ready, if I turn plate upside down nothing moves but it is oily not hard. Also would putting a little at a time change evaporation time at all? More importantly would the fumes be easier to manage done that way? I take necessary precautions but I'm still paranoid of blowing myself up lol must be the weed.
Anyway what an awesome thread much thanks to Coelho, hopefully my opinion remains the same after I smoke it. Any answers to my questions are greatly appreciated!
Easy way for making hash oil
Quote:
Originally Posted by SirHashaLot
The black paste you guys are getting from this type of solvent extraction is great but like the the guy said it's hard to smoke and "What the hell do you do with it?" -
Here's the Trick of All Tricks:
Make your black paste, then make some bubble hash or good hard cooked keif (you can use regular uncooked keif but your hash will be soft)
Then crumble the bubble hash up and slowly blend it with the oil in ratios that allow it to form a big black ball. eventually all the oil is worked into your ball of bubble hash and you get a big black chunk of black hash. Let it dry and and becomes hard as a rock and is way better to smoke than the oil by itself and can be handled and stored without "sticky loss".
This is what I do to get the most out of the herb. Instead of getting 15% extraction of bubble hash and throwing the rest out, I can get up to 50% of the weight of the original herb turn 1 lb of shake into 1/2lb of decent hash using the oil method.
By the way if you smoke a lot of pot, then you really need this
ELEV8
What method would be used to make oil that can be used in trippy sticks/ vap pens?
Easy way for making hash oil
how can you think its safe to smoke shit soaked in butane or finger nail polish remover.carcinogen carcinogen carcinogen....go to walmart and just huff butane or propane...probably fuck you up and be cheap...that is if you dont give a fuck about your brain....i dont care if it evaporates or not...there has to be some residual....VAPe nugs for days....or cold water extract...or grain alcohol
