Our secound outdoor grow.

Seedlings looking great mate, I should suggest waiting to the 2nd or 3rd node to transplant them into the wilderness, they would have such a better chance of survival, and very nice plants.

holy shit, you are going to get sooo much weed off this, what are you gonna do with it all...dont tell me its for personal use, lucky bastard

ive got 2 female clones and a lowrider outside, lol

Quote:

---

Originally Posted by Trivium

Alright well, I know for sure there are machines that you can put your leaves and what not through to get pressed and then you cook it.

Making Butaine HONEY oil with stems, leaves, bud or what ever ya want..

First you would wanna make or purchase a PVC Honey oil pipe.
Take your marijuana substances and place in en electrical grinder, grind until FULLY powder. You then take that powder and dump it into the PVC Pipe, continue until the pipe is filled. Twist on the cap and grab your butaine, start applying the butaine through the 7/14" drill bit hole to fit. The butaine shoots through all of the materials and comes out of the bottom extracting. You are then left with a pan full of liquid, you must let sit and dry until scrapeable with a flat sharp object.

The alcohol method for making hash

Take your stash (stems, seeds, weak weed) and place them in a covered pot, with enough alcohol to cover everything. Isopropyl alcohol is commonly available at pharmacies. Look for alcohol that is 99% pure. Denatured alcohol also works well. Sometimes isopropyl alcohol is called rubbing alcohol.
Now carefully boil the mixture on an electric stove. Be careful: the alcohol is very flammable! After 45 minutes of heating you can strain the solids out, saving the alcohol.
Now, repeat the process with the same residuals, but with fresh alcohol. When the second boil is over, remove the solids again, combine the two quantities of alcohol and boil again until you have a syrupy mixture. This syrupy mixture will contain much of the THC formerly hidden in the stash.

The blender method for making hash

Put water in a blender. Add a large handful of leaves, stems, seeds and weak weed. Put it in 3 or 4 ice cubes and blend it for 3-4 minutes or so. Just make sure everything is chopped very finely. Second, you will need a gold reusable coffee filter (or 90-line silk screen). Get a large mouth quart mason jar, and strain your Slurpee mixture through it. Once you have strained all the liquid through, run some more water through the leaf material to wash any extra trichomes through.

After a few minutes you will notice a white collection at the bottom of the jar, this is the trichomes. Let the trichomes settle at the bottom for about 20-30 minutes. Next, pour off the top 2/3's of the filtered green water, leaving the settled trichomes at the bottom. Add more ice water to get the green stuff out, and let the trichomes settle at the bottom for about 20 minutes again. Repeat this step one more time. Pour off as much water as you can without pouring off trichomes, filter the resulting trichome/water mix through a paper coffee filter. The trichomes will not go through the paper, but the water will. When all the water has gone through, slightly wet, cold, mass of trichomes will be left. They will be easy to handle and to press.

---

-

Quote:

---

Originally Posted by Trivium

Seedlings looking great mate, I should suggest waiting to the 2nd or 3rd node to transplant them into the wilderness, they would have such a better chance of survival, and very nice plants.

---

thanks very much, u very helpfull mate :)

Quote:

---

Originally Posted by amstron

holy shit, you are going to get sooo much weed off this, what are you gonna do with it all...dont tell me its for personal use, lucky bastard

---

I hope will get much weed and also hash and oil as Trivium says :D
and... yes all we will get is for me and my friend to smoke, we hoping to stay stoned for 1 year with all weed! :stoned:

Quote:

---

Originally Posted by amstron

ive got 2 female clones and a lowrider outside, lol

---

i hope lowrider is also female too :D

good luck mate

Hey ithg, I hope you understood those. If not , here ya go.
Step-by-step instruction manual.
http://www.marijuanahydro.com/makinghash.html

I would also stress to sell the hash you get from the male plants, as it wont be potent but will get you stoned, just not as good as the female clippings/cuttings.

Quote:

---

Originally Posted by Trivium

Hey ithg, I hope you understood those. If not , here ya go.
Step-by-step instruction manual.
http://www.marijuanahydro.com/makinghash.html

I would also stress to sell the hash you get from the male plants, as it wont be potent but will get you stoned, just not as good as the female clippings/cuttings.

---

thanks m8

another 3 babys got out :)

got 106 in total now

PS: we prefer to keep all weed, hash and oil that we will get, better no money then prison :thumbsup:

Hmmm , I guess if thats the case you wont neccesarily need the male clippings/cuttings. You should more focus on keeping your female cuttings and what not for the end of the grow. You can also purchase a hashmaker, I will direct a link below.

http://www.wellcoolstuff.com/thestore/prods/HM1.html

EDIT : You can get way bigger ones that will fit larger ammounts, wich is what you should be aiming for because ya know .... 106 plants isnt nothing. lol:pimp:

Yes make sure your carefull on where you leave things. Fertizlier bags are easy to spot out in a chopper , use your common sense on where to put things and clean up.

Quote:

---

Originally Posted by Trivium

Hmmm , I guess if thats the case you wont neccesarily need the male clippings/cuttings. You should more focus on keeping your female cuttings and what not for the end of the grow. You can also purchase a hashmaker, I will direct a link below.

http://www.wellcoolstuff.com/thestore/prods/HM1.html

EDIT : You can get way bigger ones that will fit larger ammounts, wich is what you should be aiming for because ya know .... 106 plants isnt nothing. lol:pimp:

---

man u great :)

thanks alot again

Quote:

---

Originally Posted by Trivium

Yes make sure your carefull on where you leave things. Fertizlier bags are easy to spot out in a chopper , use your common sense on where to put things and clean up.

---

thanks for advice, we always hide all stuff very good :)

Quote:

---

Originally Posted by devon420

nice, Ithg you are going to be a very happy person after harvest is done, good luck man just be careful where you leave stuff
ive got a couple kali mist plants im trying to get going i just got some seedlings
:stoned: :rasta:
Devon

---

i hope so mate, thank u , good luck for u too, i hope u get good plants and good results :)

im takingcare of the stuff ;)

what the hell is happening with my indoor plants ??? why they grow so tall and is so wear?:(

what to do please??????

:confused:

they are not getting adequate light, whats your source? get a fan to strengthen stems. if they cant support themselves, you can prop them up with a stick

Quote:

---

Originally Posted by amstron

they are not getting adequate light, whats your source? get a fan to strengthen stems. if they cant support themselves, you can prop them up with a stick

---

at the moment im using a normal light, i just want them to get 3 nodes before i move them outside.


this kind of light im using atm.

i have got a 600W HPS but i think the closet it to small for it and it will burn my plants...right ??? or not? :confused:


Closet Dimensions:

Ithg, your going to want to move your light closer to the plants, they are stretching because as amstron said, they arent getting adequate lighting so they stretch to get closer. Easy fix by moving your light about 2-3" above.

Quote:

---

Originally Posted by Ithg

i have got a 600W HPS but i think the closet it to small for it and it will burn my plants...right ??? or not? :confused:


Closet Dimensions:

---

100cm is 1 meter correct?

I dont think you should put your hps in there, unless you got an air cooled hood/or a top of the line fan to keep the heat down.

Quote:

---

Originally Posted by Trivium

Ithg, your going to want to move your light closer to the plants, they are stretching because as amstron said, they arent getting adequate lighting so they stretch to get closer. Easy fix by moving your light about 2-3" above.

---

ok mate i will do it right now, ty guys !!!

Quote:

---

Originally Posted by Trivium

100cm is 1 meter correct?

I dont think you should put your hps in there, unless you got an air cooled hood/or a top of the line fan to keep the heat down.

---

as i tought... coz i tryied to use that HPS light in a bigger closet before and it was making the plants weak and burn.

thanks

Yeh, that ssome pretty intense stretching, you can still have some good plants out of em , and even more if you plant em outside.

hehehe, we moved them out today, hope they will survive :D

here's an update of our BABY's !!!

we want your sugestions, opinions!!!

in first and secound picture u can see those fucking creatures are on leaf's, i uploaded 2 pictures where u can see them better what creatures im talking about....well the ones was on our plants was not so big, they was little, u think they are the ones who are eating our plants leafs????

thank you

...

...

Here in the last picture...something eat'd the whole head of the plant what could do that ?

....

,,,

///

'''

;;;

:::

```

~~~

...

.;'

'/.

the 3rd picture has a problem on one leaf, what causes it and how can we fix please?

][[

][`

Hey ith, they're all looking great man.

Keep up the consistent work and you'll have one hell of a harvest bro.

As to that creature, its a snail. For that problem I would purchase some epsam salts and spread it around the plant, about 1 foot diameter. Of course after you pick them off, simply take a bucket and go threw your crop and pick them all up, and then spread the epsam salt.

There could be a downside to using salt, your plant could react but that can be fixed by a simple flush at this stage.

Here are more pictures with that plant i said something eat'd the whole head, and pictures with whats happening near the plant....there are many creatures like the one ill post in next message. ( i dont know their name )

is possible those fuckhead's to eat the whole plant head??