despite the differences... how thick was the oil when produced?
Printable View
despite the differences... how thick was the oil when produced?
this is the butane extract. white and almost pure thc and the most tasty I have ever had
wtf exactly am i lookin at here?
almost pure thc extracted with butane from about an eighth of bud. took about 15 minutes to make.
used a m+m container as the extractor
where can i find this method?
just do a search for butane extraction method or something. just remember never do it inside or near any spark or flame. instead of copper or pvc I used an empty m+m's plastic container and drilled several small holes in the bottom and 1 small one on the top. the top hole must be big enough for the very tip of a butane nozzle to fit in and small enough to not let the wider part of the nozzle through. the collecting dish is a small pyrex bowl.
the thing about the butane method is that it is very selective of what it pulls out of the plant matter. only the non freezable thc oil. it is called a supercritical fluid extraction.
also remember to evaporate some straight butane first to see if it leaves any residue upon evaporation and if it does do not use it because it most likely contains carcinogenic additives
kk....
i did the rubbing alcohol method..
let 2grams of good outdoor, 2grams of stems, and .5 grams of keef, all sit in a cup, covered with 70% rubbing alcohol. Next day, i stirred it, squeezed it, stirred it with lyk 30min repetitions, on and off... then i strained it, poured it into a wide plastic bowl and set it next to a heater.. in a few hours, I took 2grams of good outdoor.. and put a teaspoon full of the juice and let it sit on top of the heater.. every 15-30min i did this... til most the juice was gone.. when it completely dried out, it smelled kinda like coffee...
i rolled it into a blunt n smoked it with a friend... we got blazed as FUCK!
sweet I have made some with alcohol that is kickass also.
try getting at least the 90% alcohol because it pulls more plant essense faster and will evaporate waaaay faster because of less water content. I think I use 99% usually. I also use cold alcohol and only submerge plant matter 2 minutes or so and im left with a cleaner product "Golden".
word.... does it really matter whether i use rubbing or drinking alcohol, if the percentages are the same??
What alcohol is 198 proof?Quote:
Originally Posted by sheist
thats what you would need to get 99% alcohol.