I've been meaning to do it for some time now but I always thought it might leave a noticeable odor. Guess not :jointsmile:
Printable View
I've been meaning to do it for some time now but I always thought it might leave a noticeable odor. Guess not :jointsmile:
I've been meaning to do it for some time now but I always thought it might leave a noticeable odor. Guess not :jointsmile:
97% rubbing alcohol and salt....dishwasher is good, wouldnt put my roor in the dishwasher!!!
It depends on the piece.
I put mine in the dishwasher, knowing that the glass they are made of is dishwasher safe. I run it at warm, not hot, temps, and don't use the pots n pans setting.
The water pipes never come quite clean that way because the dish soap is not the correct solvent for the resin buildup (salt + alcohol is indeed a better choice), but it is a quick thing that I can do a couple times a week when I happen to be running the dishes anyway, and it really keeps that stale-bong smell in check.
I've been meaning to ask about good cleaning techniques.
I don't know if I have any alcohol, is there anything else that works with salt ?
It's actually not the salt that is the important bit, it's the solvent, isopropanol.
Salt is really useful because it is not very soluble in a solution of 70% isopropanol, which is your average rubbing alcohol- some WILL be dissolved in the water, but you will still have salt crystals in there, and they act as a gentle abrasive to clean your glassware. The resin is further softened by, and ultimately dissolved into, the isopropanol, which functions as a non-polar solvent (water is a polar solvent).
A bottle of rubbing alcohol is like a buck... go look under the seat of your car and you will find enough change to go buy some! :D
I wouldn't try it. There is probably a big risk of putting a crack in it if its glass.