A light question

Quote:

---

Originally Posted by Nosehit

Hey good luck bender, 1000watts should be more than enough. I've never used a conversion bulb, keep us posted on how it works for you.

Hey torog, What part of Texas are you from? I'm a little north up here in god's country :eek: :D Most hydro shops carry the conversion bulbs also.
NH :cool:

---

Howdy Nosehit,

Well it's always good to meet a fellow Texan from God's Country ! I'm in the Mineral Wells area,ever hear of it ? What's yer approxiamate 10-20 ?

Have a good one...Torog :D

1000W agrosun. my 2 cents...

Quote:

---

Originally Posted by lordsoth666

1000W agrosun. my 2 cents...

---

will that work in a MH ballast?

HPS 1000w work the best over all deep penatrating light bigger buds dense buds. Also good for seedlings,and veg state good vent and blower are a must

A switchable ballast is just that, you can switch from MH to HPS bulb, just flip the switch and change out the light. A HPS conversion light would go with a MH ballast, and vice versa. In the long run the switchable is more cost effective cause conversion bulbs are more expensive and don't last as long, they also aren't as efficient. But switchable ballasts are sometimes expensive.

I've seen folks use HPS for the whole grow and they look fine. They run a little cooler than MH, but in an enclosed box of that size it'll have to be air cooled and maybe you'll need 2 fans an intake and an exhaust. If it gets too hot the plants will die, try to keep it around 75-80 degrees. I'd say the 1000 is overkill, a 400 or 600 would be just right, cheaper to run, easier to cool, a 600 will be 50 watts per sq ft, which is what most reccomend. everything has to be in balance, amount of CO2 available, light, water, nutes. Just make sure you can handle the temps someway.