Printable View
i just stole this because it looked good. it's airtight...
but disregard the plastic, i'll have to take that off..
what do you suggest (other than alluminum foil) for the bowl... the weed will fall right through.
and what should i put it in, it seems too heavy for a plastic bottle.
making my first non-cliche bong.
uhhh lol i forgot the picture. shit.
anyone?
id say, just go to a local headshop and buy a real bowl, or if u cant do that use a ratchet peice with a screen in it
Quote:
Originally Posted by kman
i'm 16. where can i get a good screen from?
Screens can be found in older style taps in homes and bathrooms. New homes have plastic, built in screens, but just check underneath your sink faucet, and if there is a metal screen under there, just pop it out with a screwdriver, or your keys or something.
If you have no clue what I'm saying or don't have screens, go to your local hardware store in the bathroom section, and look for sink faucet parts. They will have little packs of replacemtn creens for no more than $5.
Or a headshoip, but you have to be of age to buy screens from there. You could ask a buddy who is 18 or someoe who is of age to buy them for you if you want.
yeah i know what you're talking about. i can't just pop this off my sink. and the closest headshop is like 20 miles away. and i walk.
i guess i'll just buy it from Michaels or Home Depot or something, will they have it?
Yeah, they should have it.
thanks. off to ride my bike to home depot. be back soon :)
I've used one of those for the mouthpiece to a bubbler...Don't use it as a bowl..
My friend has one of those. He made a hooka with it. He put in in the middle of a 2 liter bottle filled up 1/2 way with water and taped it to the cap part air tight. Then he put tinfoil in and made it into a bowl (poked holes and such in the tin foil). He then made 1 hole for a carb, then 2 holes for the hooka hoses. He put tape over the carb with a little piece of paper at the end so he can lift it up. He also uses these plastic hoses he found as the hooka hoses. It hits INSANE. I'm ripped off 1 bowl.
i came back a long time ago. but heres how it went.
i went to home depot and stole these two things. they seem useful.
suggestions on how to make a bong will be greatly appreciated:dance:
EDIT: forgot the pic again, lol.
okay in the last post, i could've sworn i edited and put it in. but here it is again.
DON'T GIVE ADVICE TO MINORS.
CONTRIBUTING TO THE DELINQUENCYOF MINORS.
SUCKS BUT THAT'S LIFE...ESPECIALLY IF YOU WANT THIS SITE TO STAY UP.
Quote:
Originally Posted by akornpatch
Shut up.
okay fine i'm 35 years old. it's the internet who gives a fuck. now anyone willing to help?
and some tips on making it airtight? what type of tape can i use that won't burn... if any?
help!?
dude i don't know, get a pipe man, i'm about to send you one of my old ones cuz i feel bad for you
haha please. i can't even get papers around here. well i can but i don't want to. i want something homemade because then i'll love it more.
lol i don't even smoke weed much i just want to make a bong cuz it's cool.
i guess no1 will help :confused:
its nto athat ahrd dudee... use your imagination, put a socket/similar metal people at one end of the tupe sucka st the other, when chamber is filled with smoke, whoever is hiting, (has their lip on lip part of the bong
) takes all the mokst procdudeced and it move sreturns.
i know how to smoke it. i want to make a bong and make it airtight.
use goop or caulking super glue ruber cement jb weld i mean come on man use what you got
do it yourself, and then youll get better at making pieces
which is a really useful talent
but the bowlpiece on the left, that doesnt look like ittl work. too much holes, so you wont have super-thick-milky bud smoke, unless you like packed it full. youd get thin-whishpy-crap pot smoke.
pop the screen out of the one on the left and i bet that would work wonders. me, i just use metal window screening, i have 2 huge rolls of it.
Chewed gum works great. wanna know what works best for sealing home made bongs. A GLUE GUN. i have a mini one and i can make a bong whenever i please with a guaranteed air tight seal. go to a craft store, (you seem like a shoplifter so for your info, craft stores usually have NO security cameras) and "pick up" a glue gun and some glue sticks. whatever you do, do NOT use super glue or other types of glue, as they contain many chemicals that could be released in the form of vapor when exposed to hot smoke.
omg rofl.. i don't even remember writing this... i guess that new medication fucks with my head alot more then i thought it did.... rofl... :DQuote:
Originally Posted by slipknotpsycho
you're 16? i had a bubbler two pipes and a half ounce in my room when i was 16. :D
Dude I don't know why you would want to use shitty metal and aluminum for a bowl, metal makes bud taste like complete shit. If you want to have a cool home-made bong get a vase or some other glass that could be a bong and get a drill and just drill a whole at an angle and then find something to use as a slider.
haha i JUST turned 16. yeah i'll just steal it from like michaels.
and as for the glue gun... i thought maybe the heat would melt the glue, which is what i was scared of. i guess i'll just do that.
if only i could use this.....
dude. fuck off. If he doesent get a better idea off this site, then he'll probably end up using alum. foil like all the other minors who dont know any better. Is that better?Quote:
Originally Posted by akornpatch
I remember when I was were you were. I found a perfect solution. Go get a 3 inch pipe (a little longer and a little wider than your middle finger) and then a 3 way elbow that matches the pipe. Then you screw the pipe into the elbow joint. just buy a metal faucet screen from home depot, lows, or any other hardware store. Then force the screen into the the way elbow (the one thats facing up) and then you have a pipe with a bowl, a carb, and a chamber. You can unscrew it to clean it and make it look inconspicuous. MAKE SURE YOU BURN ALL THE METAL FOR AT LEAST A MINOUTE. Theres alot shit on the metal that will make you sick if you inhale it, make sure you burn and wash all the grease and shit off before you use your new pipe.
you can also use the gatorade bottle. Take a gatorade bottle, unscrew the cap. Burn (with a lighter, BE CARFULL) a finger tip sized hole at the very bottom rim (for a carb), and then another bigger one 3/4s of the way up for your mouth. Then take aluminum foil and use it to make a bowl at the top (poke a bunch of small holes in the bottom of the foil bowl of course so the smoke pulls through). Then seal the foil around the top with a rubber band. walla! practice this a few times. Then just suck a ton of smoke into the bottle, realease you finger that is on the carb and now you have a lungfull.
(ALUMINUM FOIL is BAD for you, so use it as little as you have to, or at least light it only long enough to get your bud cherrying)
This shit is so cheap you shouldnt have to steal it, its not worth it to steal. Just collect pop cans and get the ten cent deposits
FYI it is my understanding that you are indeed 35 years old and was only joking about being underage :rasta:
hey penis wrinkle...blow me.Quote:
Originally Posted by Kid Dynamite
first off, he's 16. second off, he's a fuckin thief...total tweeker move there.
It's called aiding and abetting, duh.
big brother's watching you.
sorry for stealing from Tech Ed and Home Depot.
will jesus come punish me?
if he does i hope he doesn't forget the whips, chains, blindfolds and hot wax.
you'd be better off kipeing some brass gas or plumbing parts to make a pipe.
I wouldn't be worried about jesus...i'd be worried about a future with shoplifting on my record.
hot wax....LMAO
^^ next thing you know you're in Juvi and taking piss tests. Not fun let me tell ya.
officer! i swear that box of condoms jumped into my pocket!
i'm not even very smart about it
i steal everything. Kleptomaniac :(. it's not good. i stole a sink piece without even thinking about a bong at the time
that rubber cement on the right might work bro.Quote:
Originally Posted by CrushIt
lol dude, shoplifting doesn't stay on your record, i'm not sure if it's just my state or all of the us that your juvinile record is sealed after you're 18 anyways. also you're talking about 'shoplifting on a record' as if it were murder or something... :thumbsup:Quote:
Originally Posted by akornpatch