yellowing leaves, crispy edges
Is this nute burn? I think it's what it is, I'm bringing the ms down to try and fix it. It's still growing full speed ahead. Thoughts? Suggestions?
Using Fox Farm Growbig, Tigerbloom, and Earth Juice Catalyst. ms topped 2.0 when problems started, replaced it with 1.6, now bringing it down to just under 1.5.
yellowing leaves, crispy edges
Oh, also, as you can see, about two weeks into flowering.
yellowing leaves, crispy edges
Thats nute burn my friend. Flush flush flush
yellowing leaves, crispy edges
Quote:
Originally Posted by karmaxul
Thats nute burn my friend. Flush flush flush
Thank you thank you Karmaxul.
yellowing leaves, crispy edges
Ok, so I've had nute problems twice now, and the solution before was also a flush. Would it be good to do a flush every two weeks or so?
yellowing leaves, crispy edges
Cut your tds down by 90%. Not only will your plants be happy but your pockets will be fatter. 1400ppm is a bit high in my opinion I use 100ppm. 1 EC = 700ppm
yellowing leaves, crispy edges
So you mean keep it down under 1.00 ms?
yellowing leaves, crispy edges
Not sure what ms is? There is parts per millionth or ppm
E.C, or electrical conductivity
mS or us which is microseimen.
1 us = .5ppm
700ppm = 1 E.C.
Measuring in us is most acurate.
yellowing leaves, crispy edges
Quote:
Originally Posted by karmaxul
Not sure what ms is? There is parts per millionth or ppm
E.C, or electrical conductivity
mS or us which is microseimen.
1 us = .5ppm
700ppm = 1 E.C.
Measuring in us is most acurate.
Right, it's mS, or us. So I'm sticking it in a roughly .94 mS tonight after flush, does that sound good?