Closet design... suggestions?
Hello people,
Here, I'm finally able to upload pics. [Thanks HEMPAMASTA!]
I'm about to build my first cabinet closet grow, and I'd like your input. I'm uploading a picture that has the drawings for the cabinet. For clarity's sake, I've removed the front door/wood panel, and I've also removed the right wood panel (wall).
Here's how it breaks down:
The big chamber, is for the main grow... The reflector will be setup inside the cabinet, at the highest possible placement (the reflector is 10.5" tall).
The chamber below the main grow, is the chamber for housing the basin (water bucket) for the hydro NFT system on top. Inside, there will also be housed the water pump (for the NFT) and an aquarium air pump (4 stones inside the basin).
The upper chamber on the right will be the 'control room'. It will contain: ballast, power outlet strips, timers (so far, 3 of them), etc.
The lower right chamber will house the mother plant and a small space for making the clones. The mother plant and the clones will have individual 6" pots with bubbler systems ("Deep Water Culture") each.
Please let me know as much suggestions and information as you can. Everything is welcome.
Thanks everyone!
-turtle420 :cool:
Closet design... suggestions?
You mentioned lighting and grow space. What about ventilation? This is what i do. I have a veg/clone chamber. Then i have my flower box. Each one is ther own seperate box. I started with six clones. When those six got big enough to flower, i transplanted to the flower box. Instead of keeping one as a mother plant, i took two cuttings from each lady that was being moved. After six clones showed signs of rooting, i made room for only six of them. I have a six site system and thats why i go with six. Maybe you don't need to have a mother plant site. Just a suggestion.
Maybe this will help you with to get an idea of your own.
Happy Growin!!!!!!!1 :D :D :D
Closet design... suggestions?
Puff420,
Thanks for the ideas and the pics... As to ventilation, here's what I had thought out:::
There are TWO independent air systems in the cabinet; 1- Plant's air, 2- Lights reflector's air.
Both systems take air from the outside (right side) and push them through, again, to the outside (left side of the box).
1- Plant's air:
The air comes from the right side wall of the cabinet, in through the lower level of the 'mother room'.
....
Ok, this shit is getting mightly complicated.... what you say I draw the fans and stuff in AutoCAD and then I re-upload new pics... I think that'll be better than writing all this stuff down.
Thanks for the input and ideas! Please keep them coming....
-turtle420 :cool:
PS: The grow room is going to be 19" x 29" aproximately... what size of lights? How many plants? I've asked this before, but Now I think that the idea is more concrete.
I was thinking of buying a dual-ballast 1000W system... and using the 600W HPS bulb only... in the future, when space permits, all I've got to do is plug-in the other 400W MH bulb... :)
As to how many plants... ??? I was thinking of making three PVC rows for the hydro NFT setup... and placing three plants per row... total of 9 plants... 9plants, 19"x29"... what do you think?
Thanks!
Closet design... suggestions?
Ok, update... I would be using the 400W MH to grow the plant, then the 600W HPS for the flowering...
9plants possible? 19" x 29" ?
Thanks!
-turtle420 :cool:
Closet design... suggestions?
Quote:
Originally Posted by turtle420
Ok, update... I would be using the 400W MH to grow the plant, then the 600W HPS for the flowering...
9plants possible? 19" x 29" ?
Thanks!
-turtle420 :cool:
From clones you could do a SOG in an area that small. The plants need to flower fast and only finish about 18"-24" tall at most. Any bigger and you will have lumens problems as well as airflow problem. You could end up with a lollypop type grow where the bottom is bare and the top single cola is the only thing with flowers.
Closet design... suggestions?
Interesting....
Let's see how we do this... :) The Art of the Grow :)
Thanks Zandor and everyone!
-turtle420 :cool:
Closet design... suggestions?
Hello everyone,
I'm about to start building this cabinet, and your input would be greatly appreciated... Please provide your throughts and opinions... if any.
It will be a SCRoG setup with a hydro NFT system.
Oh please give me input... I wouldn't want to find out something 'obvious' after I've built the thing.
Thanks for the input guys!
-turtle420 :cool:
Closet design... suggestions?
Hello people,
New update on the cabinet...
Here's the hydro NFT system... part of it. In the PVC pipes you see here, I will drill some holes (9 total) so I can put the meshpots in there. I still haven't done that because I don't have the meshpots yet... but as soon as I get my hands on them, it's Dremel time!
Please let me know what you think. The entire thing measures aprox. 28" by 18"... and if you want to know, about 4" high.
All input is greatly appreciated :)
Thanks,
-turtle420 :cool:
Closet design... suggestions?
Closet design... suggestions?
Thanks chonged...
I'll check them... very helpfull!
