Homemade Vaporizer Construction

I see a shitload of people asking how to do this so heres one of my little black market secrets.

Homemade Glass Vaporizer Construction

Materials Needed
- Standard Indoor Lightbulb
- 20oz Soda Cap
- Two Drinking Straws
- Needlenose Pliers
- Kitchen Knife
- Bath Towel

And Here We Go.......

Step 1- Fold the bath towel several times and place glass section of lightbulb into it. Holding the bulb firmly in the towel as not to cut yourself cut off all but one centimeter of the metal section with the knife as cleanly as possible leaving a tiny ring of the metal socket on the bulb about one centimeter. The knife will slice through the soft aluminum section of the bulb with ease.

Step 2- Take the needlenose pliers and remove the inside componets of the bulb (They will slide right out) then run water into the lightbulb casing to remove any small shards of glass and the frosting on the inside of the bulb if yours is frosted white or yellow. (It's only powder and it'll wash right out).

Step 3- Making sure the bulb is completely cleaned out inside take your soda bottle cap and slide it righ on to the end of the aluminum ring I told you to leave on. Take a kitchen knife heating the tip of it over a stove and puncture two straw sized holes in it at the top and the bottom of the bottle cap.

Step 4- Take your two straws and cut one down to three quarters of its original size and then cut the second straw in half. Insert the two straw pieces into the holes you made about half way.

Step 5- Now slide the bottlecap off the lightbulb stick a fat juicy bud in there and replace cap.

Last Step- Take a lighter to the bottom of the bud through the glass and place your lips on the longer straw as it'll be the only one you inhale through.(The other short straw is just for air intake) Swirl the flame on the bottom of the bud through the glass and inhale. You can swirl the flame for up to 30 seconds before you have to give it 15 seconds to cool down. When inhaling you wont see any smoke but you'll be sucking in some serious THC.

One note about the vaporizer. Do not let the flame just sit under the bud. You must make little swirling motions with the lighter. If you don't you'll see smoke filling up the lightbulb. That is not weed smoke. That is carbon monoxide and you will fucking choke to death off that shit. Just make happy happy little swirls and suck in the colorless vapor. Now you are high as fuck. Have a nice day.

In addition to show how great this homemade contraption is the fact that just a little nug you would put into a bong and get one hit off of you can get 10 hits in this device and you get way more THC.

Here's a few pics of it under construction and the finished product if you need to see it before making it.

Quote:

---

Originally Posted by Zero Revolt

Here's a few pics of it under construction and the finished product if you need to see it before making it.

---

thanks im in the process at the moment off making one it looks and sounds deadly.
nice one for the idea. :)

lol, yeah that would be cool, if you hadn't stolen it from another site, lol

oh well he got it here thats all that matters, but he should have givin the site credit.

Quote:

---

Originally Posted by Zero Revolt

If you don't you'll see smoke filling up the lightbulb. That is not weed smoke. That is carbon monoxide and you will fucking choke to death off that shit.

---

Just to be clear here, it's both, actually. CO is invisible. But, yeah, conditions inside the bulb will not support complete combustion, so you'll have a much higher than normal level of CO in there. Probably not enough to kill you, but it could make you ill. CO poisoning is not pleasant.

Beeble Do u think it would actually be safe?

safe is a relative term...

I mean what would be the odds of geting CO Poisoning?

Quote:

---

Originally Posted by BUZz UK

safe is a relative term...

---

Punk =P