1st Time Sub Success at LabCorp with Quick Fix Plus 5.7-1
Hello!
I was recently accepted into a health sciences degree program at my college and was notified I would be required to submit a 10-panel urine drug screen within a month. I am an everyday smoker (4-5 blunts a day) and have been for 7 years. I quit smoking for 23 days and took an at-home THC test and was still showing a positive result. Since this was such an important opportunity I was getting really stressed at this point. Only 1 week left to submit the UA and I was nowhere near being clean. I started searching the internet and found Quick Fix. I read, literally, every personal account on multiple forums for the last 3 years and found it to be reliable for passing as long as you could get it through the door at the right temperature and have a good batch. I took a trip to the local head shop where I found several brands but right in the middle of them all was Quick Fix.
I bought Quick Fix Plus (3 oz. size) with included vial containing uric acid beads (Canadian version) batch number P4QQ-13. I verified the batch to be good on their website and tested it with an at-home THC test just to be sure it worked. I wanted to cover every aspect I could before trying to pull off the substitution. The day before I went to LabCorp, I practiced with the temp. I was able to keep it at 96 degrees without the hand warmer for 30 minutes so I felt comfortable that with the hand warmer I would have no trouble with the temperature. I was ready, but still nervous that it would actually pass the lab testing.
The test day was here. I woke up, heated the Quick Fix for 10 seconds, then an additional 10 seconds because my microwave sucks. It was reading at 100 degrees. I broke open the hand warmer, shook it up for 30 seconds or so, then used the provided rubber band to attach the hand warmer to the bottle. I tucked it away and headed into LabCorp. When I arrived (about 10 minutes after heating the Quick Fix) I found the waiting room to be completely full and was thinking I was going to be waiting forever. I gave the chain of custody form to the front desk and took a seat right in front of the clock. I watched the minutes fall away, a total of 20, which seemed forever, then they called my name. I was taken back into a room where I signed the paperwork. Then I had to wait about 5 more minutes because they were so busy. One drug screen after another, then it was my turn. The girl took me back to the bathroom, gave me the don't flush don't wash your hands speech and then closed the door. I pulled out the bottle of Quick Fix, shook it, and checked the temperature, 97, right on! I poured it into the cup and headed out. She looked at it, checked the temp, then poured a small amount into a container and told me to flush the rest. I walked out feeling confident that the sample was accepted at temp and the results would come back negative.
The very next day I received an e-mail with the results (since it was being processed through an online background verification company). Negative for all 10 substances with no comments. They didn't suspect it as being synthetic at all!
I read so many stories and wanted to share mine for anyone who is in need of an alternative to passing their drug test. As of today, in the state of Florida, this method of substitution will work for you at LabCorp. It's much easier to do than I had imagined, also. Literally, a piece of cake to pull off.
If you have any questions, I would be happy to answer them. Happy substitution to all! :rasta:
1st Time Sub Success at LabCorp with Quick Fix Plus 5.7-1
Quote:
Originally Posted by JustAGirl
Hello!
The very next day I received an e-mail with the results (since it was being processed through an online background verification company). Negative for all 10 substances with no comments. They didn't suspect it as being synthetic at all!
I read so many stories and wanted to share mine for anyone who is in need of an alternative to passing their drug test. As of today, in the state of Florida, this method of substitution will work for you at LabCorp. It's much easier to do than I had imagined, also. Literally, a piece of cake to pull off.
:rasta:
I joined the site just to say thank you for this I could see this happen to me very soon, many thanks.... :rasta:
1st Time Sub Success at LabCorp with Quick Fix Plus 5.7-1
Alright, I joined to add my two cents and confirm what the OP has said. Had a LabCorp test a couple of weeks ago in California. Used Quickfix Plus 5.7-1 *CANADIAN VERSION* with uric acid (it will say Canadian batch on the instructions, says "made in USA" on the outside). Always double-check the urineluck website to make sure your batch hasn't been recalled. Anyway, microwaved it for about 10 seconds then rubber-banded the heat pack to the bottle. Used one of those ACE bandages from Walmart to keep the whole thing attached to my leg. Wore boxer briefs and an extra pair of boxers over it all, just in case. It was about two hours before I finally got called in from the waiting room. The heat pack stayed warm the entire time and would have stayed much longer (they say it will last up to five hours). Next time, however, I might not even use the heat pack. I've heard that many people have great success just keeping it attached to their body, as long as it's close enough and insulated enough (with clothing or otherwise) to keep it body temperature, and as long as you preheat it in the microwave. Also, as long as you remain relatively calm and dress semi-professionally when you go in for your test, they aren't likely to suspect anything.
Anyway, here are my tips and problems I ran into.
TIPS:
- Keep the heat pack on the opposite side of the temperature strip when/if you rubber band it to the bottle (you don't want direct contact with the heat pack to interfere with your reading).
- Don't use sticky tape to attach the urine kit to yourself -- I was in a really quiet restroom with a lady standing a few feet outside. Sticky tape would have been too noisy (use ACE bandage).
- Be careful if you're going to use the spray-nozzle attachment for the Quick Fix bottle. It can sometimes makes a 'ketchup-bottle sucking' noise when you let it "breathe in" after you squeeze it.
- Don't over-wrap the bottle or make it too hard to access. You're dealing with a limited amount of time. She only gave me two minutes before telling me to hurry up.
PROBLEM:
- Temperature was too high when I checked the strip! Fortunately, this is a lot easier to deal with than it being too low. When I first checked the temperature strip, there was no reading but it felt too warm to be under 90. I knew the head pad was working, plus everything was attached to my body so it had to be more than 100 deg rather than less than 90. I simply swished the entire bottle around in the cool toilet water for about 30 secs to try and cool it down (if they use dye in the water, just make sure you don't get it on your hands and wipe any excess of on an interior layer of your clothing). After wiping the wetness off of the temp strip, I was within the range (about 98 degs). I've since read it might have been easier to simply pour the "urine" into the sample cup first and just swish it around in air to cool it off but I wanted a reading before I poured it since I've heard the heat packs can sometimes overheat to 120+ degrees. I suppose it depends on whether or not you're being rushed, so just pour some out and swish it around in the cup for a few seconds if you have to. Don't make them wait too long or you may have to re-test.
Anyway, that was pretty much it. The "fill line" for my sample cup only required 1/4th of the Quick Fix bottle. It's not as hard as it may sound but I know I appreciated every bit of info I was able to find. Just make sure you have an "exit plan". You can either put the used bottle into one of your pockets on the way out or into your "tighty whities" but just make sure you have somewhere to put it (and that its closed).
Peace.
EDIT: (P.S. I passed.)
1st Time Sub Success at LabCorp with Quick Fix Plus 5.7-1
Hey just a girl what part of FL did this work for you? I'm in Florida and am thinking of using QF..
1st Time Sub Success at LabCorp with Quick Fix Plus 5.7-1
Quote:
Originally Posted by JustAGirl
Hello!
I was recently accepted into a health sciences degree program at my college and was notified I would be required to submit a 10-panel urine drug screen within a month. I am an everyday smoker (4-5 blunts a day) and have been for 7 years. I quit smoking for 23 days and took an at-home THC test and was still showing a positive result. Since this was such an important opportunity I was getting really stressed at this point. Only 1 week left to submit the UA and I was nowhere near being clean. I started searching the internet and found Quick Fix. I read, literally, every personal account on multiple forums for the last 3 years and found it to be reliable for passing as long as you could get it through the door at the right temperature and have a good batch. I took a trip to the local head shop where I found several brands but right in the middle of them all was Quick Fix.
I bought Quick Fix Plus (3 oz. size) with included vial containing uric acid beads (Canadian version) batch number P4QQ-13. I verified the batch to be good on their website and tested it with an at-home THC test just to be sure it worked. I wanted to cover every aspect I could before trying to pull off the substitution. The day before I went to LabCorp, I practiced with the temp. I was able to keep it at 96 degrees without the hand warmer for 30 minutes so I felt comfortable that with the hand warmer I would have no trouble with the temperature. I was ready, but still nervous that it would actually pass the lab testing.
The test day was here. I woke up, heated the Quick Fix for 10 seconds, then an additional 10 seconds because my microwave sucks. It was reading at 100 degrees. I broke open the hand warmer, shook it up for 30 seconds or so, then used the provided rubber band to attach the hand warmer to the bottle. I tucked it away and headed into LabCorp. When I arrived (about 10 minutes after heating the Quick Fix) I found the waiting room to be completely full and was thinking I was going to be waiting forever. I gave the chain of custody form to the front desk and took a seat right in front of the clock. I watched the minutes fall away, a total of 20, which seemed forever, then they called my name. I was taken back into a room where I signed the paperwork. Then I had to wait about 5 more minutes because they were so busy. One drug screen after another, then it was my turn. The girl took me back to the bathroom, gave me the don't flush don't wash your hands speech and then closed the door. I pulled out the bottle of Quick Fix, shook it, and checked the temperature, 97, right on! I poured it into the cup and headed out. She looked at it, checked the temp, then poured a small amount into a container and told me to flush the rest. I walked out feeling confident that the sample was accepted at temp and the results would come back negative.
The very next day I received an e-mail with the results (since it was being processed through an online background verification company). Negative for all 10 substances with no comments. They didn't suspect it as being synthetic at all!
I read so many stories and wanted to share mine for anyone who is in need of an alternative to passing their drug test. As of today, in the state of Florida, this method of substitution will work for you at LabCorp. It's much easier to do than I had imagined, also. Literally, a piece of cake to pull off.
If you have any questions, I would be happy to answer them. Happy substitution to all! :rasta:
Would you mind saying where in California this was? And were you using certifiedbackground.com? I am in a similar situation and would love to be able to put my mind at ease. Please and thank you!
