is there a cutoff level for ppm of tap water where it shouldnt be used? i use distilled and am wondering if i even have to.
Printable View
is there a cutoff level for ppm of tap water where it shouldnt be used? i use distilled and am wondering if i even have to.
It really depends on the contents of the water more than the actual TDS levels; however, I would say the 250-300PPM area for tops. I have used it higher (400PPM) with no problems though, so...
Some people say 200. But I use RO water so I can't tell you for sure.Quote:
Originally Posted by Dr. VanNostrin
General Hydro recomends hardwater micro after 200- or 220 ppm .
I'd say anything over 220 ppm is good reason to use distilled / r/o .
Peace
Crispi :jointsmile:
if my tap water is in the 400s, could i just dilute it with distilled instead of using just distilled and adding cal-mag? my goal is to not have to buy tons of distilled water and not to have to add cal-mag
You absolutely can, that keeps a good level of the nutrients you're missing in distilled alone.Quote:
Originally Posted by Dr. VanNostrin
Is there anyway you can put in an RO system? A good one should cost between $150 and $200. Either way you won't need a lot of CalMag. I use a half a teaspoon per gallon now (2.5 ml).
how do ro systems work? i dont mean how do they purify the water, i mean how do they hook up to your water system? i thought i saw something about it taking time for the ro system to produce the water. is that right?
I am still trying to figure out PPM of what?? Chlorine?? Bromine?? Sodium Chloride?? Fecal Solids?? what?? I don't understand "TDS levels".Quote:
Originally Posted by gainesvillegreen
They generally use a saddle clamp to connect the 1/4" supply line, then they have a line to the drain and a line to a tank or rez.
Pretty simple. Yes, they do produce water slowly, generally 25 gallons per day. The faster the production, the more expensive, although I saw a 90 gallon per day system for $200.
Quote:
Originally Posted by Dr. VanNostrin