Here we go, my first plant
http://img507.imageshack.us/img507/1...gen1473qx2.jpg
http://img523.imageshack.us/img523/6...gen1474zh3.jpg
http://img172.imageshack.us/img172/2...gen1475yn6.jpg
http://img214.imageshack.us/img214/6...gen1476vx3.jpg
Printable View
Hmmmm...
Well, your plant looks healthy enough for now, but you're going to need to upgrade a few things if you want to grow it successfully all the way to finished buds.
1x60wats is barely enough for a 1foot by 1foot space.
Also, your going to need a bigger pot very soon.
What kind of soil is that?
Thx for the answer
Well its just soil from the supermarket, its a 50% and 50% mix from organic and "ready soil", but it has nothing sofisticated you know...
But it seems that it has growth very nice, no matter the soil type, or i am just lucky with the ph it seems...
My friend said that the seed its a brute force seed that will growth no matter anyshit it happen lol, how can be that
What psteve said...60 watts is borderline for flowering a plant, unless it's small. You'll probably be okay in veg, though. Looks like your plant is about 4 inches tall, right? (And it also looks like it's too low in your pot.) You're right at the point where your plant should start really picking up some height. If your plant doubles in height in the next week or two, you'll need to repot. That would be a good time to add more light. 75 watts could get one plant through flower pretty well.
If it never gets bigger than 16 inches!Quote:
Originally Posted by Roughrider
You need AT LEAST 50W per square foot of floor space. Even 100W per square foot is still not that much. Especially with CFL's.
Well now it is 16cm of height, and i am really thinking adding another light of the same time, so will be 120watts, in other words 7200 lumens concentrated in 1 sq.feet., the problem is guys... that very soon i could not focus the lumens on the top of the plant because the plant will grow at the point that will be imposible.
Guys a question here, is there enought to light only the top of the plant? Or it is necesary to light it entirely?, i mean the leaves will die if i dont light them all? could be dumb you know..lol
I am working really hard in a LED light system, i will put some pictures soon.
http://img100.imageshack.us/img100/5...gen1479pk6.jpg
http://img210.imageshack.us/img210/4...gen1480qw5.jpg
Well, what you want to look at is lumens per square foot...different lights are more or less efficient in producing lumens, so watts (which is a measure of energy used, not light produced) isn't the way to go.Quote:
Originally Posted by psteve
Quick 'n ' dirty chart--
Under 2,000 lumens sq. ft.--Nothing
2,000-3,000 lumens sq. ft.--Next to nothing
3,000-4,000 lumens sq. ft.--Marginal to okay grow
4,000-5,000 lumens sq. ft.--Okay to good grow
5,000 lumens+ sq. ft.--Very good/optimal grow
This is why a 400w HPS is good enough to take care of a 3' x 3' area...that's around 50,000 lumens in 9 sq. ft. 5,100 lumens sq. ft. I've used a 250w bulb in a 27â? x 27â? area...27,000 lumens in 5 sq. ft. Works fine. HPS lights tend to be 25-70% more efficient than CFLs, which is another good example of why you should look at lumens, not watts.
60 watts of CFL is going to give you ~ 4000 to 4200 lumens. You're in the okay area for one sq. ft. 75 to 80 watts puts that up to 5,100 to 5,600 lumens. It's always hard to tell if people are growing giants, but I have fit 4 good sized (around 3') plants into a 5 sq. ft. area. I figure a decent plant with a decent yield will take up 1.25 sq. ft. 5600 lumens is about 4500 lumens/sq. ft. for a plant that size... not optimal, but will do okay. I've seen what $7 worth of Wal-Mart Warm White bulbs can do for one plant, and it's goodâ??that's 92 watts and 6600 lumens.
If you're doing massive LST, you may get a plant that's 16â? tall and 16â? in diameter. In my experience, with normal LST or topping, a plant is more like at least twice as tall as it is wide. So a 3 foot tall plant is more like 12â?-16â? in diameter...and a grow area that's 12 to 16 inches square is between 1 and 1.7 sq. ft. That's 5000 to 8500 lumens to get into the optimal area. So 75 watts is a little short...it's on the low end of that. 90 would probably be fine. But it's still about lumens per sq. ft. CFLs are pretty consistent in giving about 70 lumens per watt, so 70 watts per sq. ft. of grow area will be fine.
It's not dumb at all. The biggest problem with CFLs is that they don't give much light penetration. With an HPS (or MH) light, you've got a lot of light coming from a single source. That focus and intensity gives you more heat...but light depth penetration too. So, actually, with CFLs, you're better off getting some light underneath. You could put all your lights in the sides provided you had enough lights to provide lumens for the grow area (some people use tubes on the sides of their grow in this way). But, really, you're a lot better off having most of your light on top. Just my opinion on that.Quote:
Originally Posted by ojitos1985
Actually, if you want to get technical, neither watts nor lumens are the best measurement of how effective your lights will be. But most people don't even understand lumens, let alone LUX. Watts are something easy to understand, and are marked on the bulbs, so the math is easy. >50W/sq.Ft. is just a ballpark estimate of the MINIMUM light needed to grow cannabis using CFL or HD lighting.Quote:
Originally Posted by Roughrider
Yes, I want to get technical here because what you are saying could be misconstrued or even be misleading. Lumens are the simplest, most readily available measure of light power. Lux simply refers to the amount of lumens striking a specific space...one lux = one lumen per square meter. (Since one square meter is almost exactly 10 sq. ft., you want 50,000 lux.) Anyway, it's much, much easier for growers to use information easily accessible. People can use a tape measure to see how big their grow area is. And easily available information, in the case of grow bulbs, is lumens.
Watts, on the other hand, have nothing to do with light whatsoever. It does not matter how easy they are to understand, they are completely irrelevant to light. They are a measure of the amount of energy a light source uses to produce light. Since there is a wide variance in efficiency between different light sources, watts are a very, very poor way of judging efficiency of lights for grow purposes. For instance--
150w HPS lightâ??15,800 lumens; 105.3 lumens per watt
1000w HPS lightâ??147,000 lumens; 147 lumens per watt
26w CFL lightâ??1750 lumens; 67.3 lumens per watt
4 lamp 4' T5 216w Fluorescentâ??20,000 lumens; 92.6 lumens per watt
100w of incandescent lightâ??1500 lumens; 15 lumens per watt
So, a 1000w HPS is over 40% more efficient than a 150w HPS...which is 50% more efficient than a CFL. In other words, you would need over twice as many watts of CFLs to do the job of a 1000w HPS. You'd need 50% more watts of CFLs to equal the light output of a 150w HPS. But a T5 fluorescent is closer to a 150 or 250w HID light. So there's not only variance in light output efficiency per watt between different types of lights, there is variance within the same type of lights. It adds up to a simple conclusions. Watts are not a good way of judging how much light you are producing.
For a 10 sq. ft. grow area, you would need:
One 400w HPS (50,000) lumens = 400w
Three 150w HPS lights plus 1 26w CFL = 476w
Two 4 lamp 4' T5 216w Fluorescent rigs, plus one 2 lamp 4' T5 108w Fluorescent = 524w
28.5 26w CFLs = 743w
Those substantial differences make the point. Use lumens per sq. ft. Try to get 5,000 per sq. ft. Maximize the light you create with reflectors and good reflective surfaces. With CFLs, that means about 70w to 75w per sq. ft. With HID lighting, the amount is at least 40% lower...even lower as you get into larger HPS or MH bulbs.