Printable View
Since its getting cold out, were about to turn the heat on soon. My plant is located in my room, next to the register(vent), and cant be moved to another location in the room. would this hurt my gal when it comes on? should i tape some cardboard over it? I think my plant should be bigger, and i think it is due to the cooler temps in my room, would this be true?
Well my heater puts out some pretty hot temps. I don't think I would want my plant sitting by the registers. If it survives, it'll probably get dried out. You gotta shut that register.
And yes warmer temps means faster/bigger growth. It also increases chances of mold/rot.
Don't shut or cover the register, just re-direct the air coming out of it.
Yeah, I suppose as long as it is directed well away from the plant it should work fine.
Yeah, I suppose if the air flow is directed well away from the plant you could do that. Just watch the humidity, it may get much drier than before.
Oh great, I got told "server too busy, try again later." So I did, now I got 2. sorry.
its one of the old kind, it either gets off or on, not diredtional. i just cardboarded it up. Thanks for the sugs. though.
Also, what kind of heat is it? Gas/electricity? With electricity heat, you have to watch your humidity levels.
Yeah, I'd avoid direct contact with that heater :)
its gas
i think what he was getting to was is it forced air or baseboard heat. A baseboard heater will not dry your plant out, but will be a more constant heat that will add to humidity and a forced air heater will dry the air out and make your plant nice and crispy. So, if it is forced air, you will want to turn that heater off, but i think you are using cfl's, so if you have it open, your gonna want to keep a really close eye on that plant so it doesnt dry out.