The ''Powerfall''

[MaryjaneAndHashley]

Yesterday me and some friends got really high, and when I came back home I wanted to smoke again. I wanted to make a waterfall bong. I went to grab a bottle and there was only a Powerade one. So I was like okay Ill do what I can.

So since I was already high, I was thinkin of something to use for a bowl instead of foil.. and I got that bright idea: I tried to fit my bong's bowl in the cap. The cap hole was too small though, so I worked it a lil with a knife and got the rubber off. It was amazing! Try it out!

a few pics

[Professor Dan K.]

powerfall... thats clever hahaha

waterfall bongs kill you tho, gravitys are better only cuz theyre bigger (normally)

i smoked a couple bowls of dank in my sobe waterfall i made and i completely was gone.

[MaryjaneAndHashley]

powerfall... thats clever hahaha

waterfall bongs kill you tho, gravitys are better only cuz theyre bigger (normally)

i smoked a couple bowls of dank in my sobe waterfall i made and i completely was gone.

haha yea. Like 3 hits and im tight.

[Grava Flave]

alright this has been pissin me off for far too long

how the HELL do u make a waterfall bong.. its the only type of smoking device im completely clueless about

[Smoke'n'Toke]

Cut a hole near the bottom of a bottle, decent size but has to be able to be covered by your thumb. Fill the bottle 3/4 up with water, then stick your bowl in the bottle cap.

Light up the bowl, and take your thumb from the hole. The water rushes out of the hole, and draws smoke into the bottle. Cover the hole back up, take the bowl out and inhale.

They wreck you.

[MaryjaneAndHashley]

Cut a hole near the bottom of a bottle, decent size but has to be able to be covered by your thumb. Fill the bottle 3/4 up with water, then stick your bowl in the bottle cap.

Light up the bowl, and take your thumb from the hole. The water rushes out of the hole, and draws smoke into the bottle. Cover the hole back up, take the bowl out and inhale.

They wreck you.

for the hole I just burn it with a lighter, makes it nice and clean

but why fill the bottle 3/4 up? I just fill it completely

[notransfer]

haha i wanna try this...

[Smoke'n'Toke]

for the hole I just burn it with a lighter, makes it nice and clean

but why fill the bottle 3/4 up? I just fill it completely

Dunno, i just heard 3/4 so its what I do. Probably works all the same.

[JetFoi34]

looks like the stanley cup in the first pic

[MaryjaneAndHashley]

looks like the stanley cup in the first pic

haha lol, yea, but with bud in it.

edit: oh lol, nop, only in the 2nd

[MaryjaneAndHashley]

Dunno, i just heard 3/4 so its what I do. Probably works all the same.

But if you put less water youre gonna get less smoke arent ya?

[MaryjaneAndHashley]

looks pretty cool.:thumbsup:

I was pretty blazed when I made it, and when I realized the bowl fitted in there I was like...Wow...I created something :D

It looks..meant to be xD

[ripher]

Another easy way to make the top of a waterfall like he did here with the powerade is to go buy one of those metal pipes that look really gay and make sure the bowl screws in to the shaft of the pipe where you can unscrew it off.

Like the one on the top of this picture: Image:Metal-pipes.jpg - Wikipedia, the free encyclopedia (http://en.wikipedia.org/wiki/Image:Metal-pipes.jpg)

then drill a hole in the top of a bottle cap so that it is the same size as the screw-in bottom section of the bowl from the pipe WITHOUT the threads of the screws, doing this allows you to securely screw in the bowl to the bottle cap. If you're like me, you like smoking out of all different things, so i just keep this cap n bowl around with all my other smoking stuff, if ever i get the desire to make a gravity bong, lung, waterfall etc. i just whip it out and i already have the hardest part done :)

[Samwhore]

pff hahahha, you should try one of these mega gatorades once

64oz

[MaryjaneAndHashley]

pff hahahha, you should try one of these mega gatorades once

64oz

u know...after I made it, I realized I had that BIG ASS powerade bottle...like real bigger, kinda long. ow well, its the same cap, ill just burn a hole in the bottle.

[Samwhore]

u know...after I made it, I realized I had that BIG ASS powerade bottle...like real bigger, kinda long. ow well, its the same cap, ill just burn a hole in the bottle.

haha, nice, ill have to try that one, I have a few gatorade bottles in the fridge

[MaryjaneAndHashley]

haha, nice, ill have to try that one, I have a few gatorade bottles in the fridge

Hit that shit!

[Samwhore]

Hit that shit!

well, I have to find a time to smoke, im still on those UAs ya know

[MaryjaneAndHashley]

well, I have to find a time to smoke, im still on those UAs ya know

UAs?

[Samwhore]

UAs?


urinal analysis, piss tests ya know

n00bs, somebody asked me that earlier today

[MaryjaneAndHashley]

urinal analysis, piss tests ya know

n00bs, somebody asked me that earlier today

its just the word I didnt know, ya know

[Samwhore]

its just the word I didnt know, ya know

I know =)

but I love the word noob,

and you are my noobette

[MaryjaneAndHashley]

I know =)

but I love the word noob,

and you are my noobette

ewwwwwwwwwwwwwwwwww

I cant stand the ''ette'' thing..I dont know how the hell it sounds like in english but in french is fakn ugly xD

[Samwhore]

it sounds like et

or I could call you nooby

[MaryjaneAndHashley]

it sounds like et

or I could call you nooby

it sounds like et...wtf

et...sounds like ''hay'' without the ''h'' to me

[Samwhore]

okay, let me think, it sounds like the et in "let"

[TurnyBright]

just made one of these with some weird shaped water bottle

best gravity bong i've used to date

[poiuyt]

Second pic is beautiful

[MaryjaneAndHashley]

okay, let me think, it sounds like the et in "let"

ow well, so noobette sounds just like in french, but a lil less gay haha


Second pic is beautiful

thanks :cool:

[Samwhore]

ow well, so noobette sounds just like in french, but a lil less gay haha



thanks :cool:

bet,
let
met

sounds like that, pick now,

noobette
or
nooby

[Professor Dan K.]

how about noobcake? or noobsuace...

i feel dumber having typed that out, lol thanks sam

[Samwhore]

how about noobcake? or noobsuace...

i feel dumber having typed that out, lol thanks sam

maybe dumber because you spelled "sauce" wrong,

hahah, I found it,

"NOOBYKINS"

[MaryjaneAndHashley]

maybe dumber because you spelled "sauce" wrong,

hahah, I found it,

"NOOBYKINS"

kins? wadafak?

and wow its like a brainstorm tryin to find a nickname for meh

[Knucklecallus420]

dude i made one of these this weekend! by far the cheapest and yet most effective device ive ever used. i used a socket, and a vitamin water bottle... wow it blew me away
but i dont take the cap off, i just suck the smoke out of the hole the water comes out

[Professor Dan K.]

maybe dumber because you spelled "sauce" wrong,

hahah, I found it,

"NOOBYKINS"

awww man i did lol :(

that could have been it

[Samwhore]

kins? wadafak?

and wow its like a brainstorm tryin to find a nickname for meh

I love noobykins

or noobycakes,

<3

their better than my bitch lol!:thumbsup:

[slipknotpsycho]

good craft and worksmanship... so don't think i'm tearing you down or anything o.0 cuz i'm not...

but you're not the first to put a metal bowl into the lid of a bottle lol... the bowl asembly on my steam roller is a 20 oz bottle cap with a metal bowl (including threads)...

and theres an easier way just for future refrence... you get the hole just almost as big around as the threads are... and you put a flame through it from a lighter for about 10 seconds, then push down and turn the way you'd turn if you were screwing something in.... it makes threads so you can just twist the bowl out and switch beween shit... like the bowl i use on my steam rolller is also the one iuse on my gas mask... when i need to smoke from either i just screw it off like you would on any normal bong/pipe (metal)

just a tip o.0

[Platinum Plus]

Nice to see some ingenuity loll

[MaryjaneAndHashley]

good craft and worksmanship... so don't think i'm tearing you down or anything o.0 cuz i'm not...

but you're not the first to put a metal bowl into the lid of a bottle lol... the bowl asembly on my steam roller is a 20 oz bottle cap with a metal bowl (including threads)...

and theres an easier way just for future refrence... you get the hole just almost as big around as the threads are... and you put a flame through it from a lighter for about 10 seconds, then push down and turn the way you'd turn if you were screwing something in.... it makes threads so you can just twist the bowl out and switch beween shit... like the bowl i use on my steam rolller is also the one iuse on my gas mask... when i need to smoke from either i just screw it off like you would on any normal bong/pipe (metal)

just a tip o.0


I know im obviously not the first to do that, but its just the first homemade thingy that turns out to work and not be foil...I was just high and proud of myself, lol, i just found it was really cool cause it fitted with almost no work on it and it looked nice.

And btw, this thread was not to say I got the most original homemade thing, in fact I would have been very pleased if somebody posted that before I figured out myself. I couldnt make a nice homemde thing, so its just to help if somebody has problems with that like I did.

And you mean screwing the bowl into the melted plastic?


I love noobykins

or noobycakes,

<3

their better than my bitch lol!:thumbsup:

lol, call me whatever you want ;)

[Professor Dan K.]

good craft and worksmanship... so don't think i'm tearing you down or anything o.0 cuz i'm not...

but you're not the first to put a metal bowl into the lid of a bottle lol... the bowl asembly on my steam roller is a 20 oz bottle cap with a metal bowl (including threads)...

and theres an easier way just for future refrence... you get the hole just almost as big around as the threads are... and you put a flame through it from a lighter for about 10 seconds, then push down and turn the way you'd turn if you were screwing something in.... it makes threads so you can just twist the bowl out and switch beween shit... like the bowl i use on my steam rolller is also the one iuse on my gas mask... when i need to smoke from either i just screw it off like you would on any normal bong/pipe (metal)

just a tip o.0

i use my metal pipe as the slide bowl for my sobe waterfall too (peices of it anyway), it works really well because it the top and bottom part screw in witht he cap inbetween them, so it clamps down nice and tight on it.

i havent used it in a long time either... made it for fun and dont even use it... gotta get on that

[slipknotpsycho]

I know im obviously not the first to do that, but its just the first homemade thingy that turns out to work and not be foil...I was just high and proud of myself, lol, i just found it was really cool cause it fitted with almost no work on it and it looked nice.

And btw, this thread was not to say I got the most original homemade thing, in fact I would have been very pleased if somebody posted that before I figured out myself. I couldnt make a nice homemde thing, so its just to help if somebody has problems with that like I did.

And you mean screwing the bowl into the melted plastic?



lol, call me whatever you want ;)

yeah, you heat up the plastic and just screw it.... the hole has to be a bit smaller then the threads obviously or it's not gonna work... makes it nice n clean and you can just toss it somewhere for awhile if you have ot use the bowl for soemthing else...

and i wasn't saying anything bad o.0 like i said good worksmanship and don't take it the wrong way :thumbsup: homemade shit that does'nt have tape or glue everywhere gets extra points ontop of the creativity lol...

[Samwhore]

lol, call me whatever you want ;)

noobcakes,

doesnt matter, ill think of a million of them, just remember, anything noob i say, I am referring to you

[MaryjaneAndHashley]

noobcakes,

doesnt matter, ill think of a million of them, just remember, anything noob i say, I am referring to you

Why am i a noob again?

[Samwhore]

Why am i a noob again?

because we <3 pwnage and I pwned you with that one post about your readhead and your mom

[MaryjaneAndHashley]

because we <3 pwnage and I pwned you with that one post about your readhead and your mom

my mom? haha I dont remember

wasnt it because I didnt know a word or something like that?!

[Samwhore]

my mom? haha I dont remember

wasnt it because I didnt know a word or something like that?!


no, i said something like

"I stole your red-head last night,

we got :giggity: with it

your mom included"

[MaryjaneAndHashley]

no, i said something like

"I stole your red-head last night,

we got :giggity: with it

your mom included"

Im extremely sure it wasnt that. I said sumthing and you said I was a noob for it lol.

[Podge_Boro]

haha, good handy work mate
i like it

[Samwhore]

Im extremely sure it wasnt that. I said sumthing and you said I was a noob for it lol.

you quoted that and said "I feel owned" the one was I said UA and called you a noob

[MaryjaneAndHashley]

you quoted that and said "I feel owned" the one was I said UA and called you a noob

OHH YEA it was that UA thing!!

You got one hell of a memory :)

[Samwhore]

OHH YEA it was that UA thing!!

You got one hell of a memory :)

if only you could look into my brain