How to Make Bolt and Nut Pipe

[Bong ripper420]

i live with my parents and do not have a credit card but want to buy a stealth pipe like the one's on these links Nut n Bolt Pipe (http://everyonedoesit.com/online_headshop/Nut_n_Bolt_Pipe.cfm?iProductID=1334)
http://www.superpiece.com/photos/stealthnutbolt.jpg
does anyone know the specific nuts and bolts needed to make this.
thanks.
:rastasmoke: :S5: :rastasmoke: :S5: :rastasmoke:

[higher4hockey]

go to your local hardware store and put it together in the store. that way you can figure out what works and what doesn't. when the trusty hardware store guy comes up and asks you if you need any help, just say no i got it, thanks. and make sure you take it apart before you pay for it, unless you don't care what they think.

[Machello]

Innovative :rastabong:

[russ-bob]

yea its sic i think the one on the web you like is alot of machined parts O.o spaceficly for that build but i know you can make one out of black iorn ! just dont use copper its extremaly toxic when its heated vapors are breathed. bronse works well also!

~Russ~

i made one like that that will fit in the tube of a highlighter once the ink stick is out


actualy ill decribe how its made if you wanna make one
materials
1.grese valve (new) ask at hardwhere store they look like a lil bowl head with a screw off piece at the bottom
2. 3/16 clear plastic tubing
3.drill
4.Vice

process

1.unscrew the lil check valve in the bottom of the grese valve
2.put the lil check valve you removed in the vice with the hollow end up
3.drill till the drill stops going down
4.empty out the filiings there should now be a whole in it
5.put the bigger part of the greese valve in the vice and drill it out to whatever size you like
6.cut the tubing to like 2 inches
7.screw the greese valve back together
8.push the tubing on the lil stem where the check valve was
9.TOKE!

this is the grese valve
http://www.conexmetals.com/gif-1/gf2.jpg

[Bong ripper420]

thanks for the instructions russ-bob

[Nochowderforyou]

I'd just go down to a hardware store if you're looking for something like that. You can get creative and make any pipe you want from random pieces.

That's how we used to make our pipes before glass was introduced. We figured why buy a metal pipe when we could just make one. We made some pretty cool stuff too. Just go to the section where nuts and bolts are and go nuts. It would probably be cheaper too. :)

[ganjah]

After a while your weed is going to taste so awful. I had to deal with a metal pipe part of last summer and smoking out of it was getting nastier and nastier. I'd just invest in a glass pipe and take good care of it.