Log in

View Full Version : a real noob who needs realth stealth cab plans



spankey
01-23-2007, 01:07 AM
hi all,

where here is my situation. i live in an apartment and i need real stealth. my closets are all either way to small or are being used. i need extream stealth. i have 1 daughter who will steal my crop if she detects it(visits often). i have a nosey land lord and my niehbors can smell it when i smoke a cig. so i need extream stealth. i also want this cabinet to grow a scrog (i hope 3 plants), have a mother plant, and a cloning chamber. i do have a spare bedroom(we use it as a storage room) to place the unit but it must not look like a grow factory. so it needs oder control, sound control and heat control. i know this is a lot to ask for. oh ya a very parinoid wife who will not let me grow if the stealth issues can not be met. so could someone help me with plans.

Kb420Kb
01-23-2007, 01:18 AM
haha i could help you out bro.

stinkyattic
01-23-2007, 01:24 AM
haha i could help you out bro.

Then do it...bro.

Spankey,
A fridge is not a bad place to start. Flower in the fridge, veg in the freezer, put a hasp on it, tell kiddo that you keep your 'adult drinks' in it.
Or a standup tool closet like you can get at home dePOT. It can be fitted out nicely, and locked.

Kb420Kb
01-23-2007, 01:30 AM
ok materials needed.

2 lights (23w cfls) if there barely being planted if not get an HPS system.
2 computer fans for ventilation. .if you want extra good ventilation get 4.
1 glass thermometer.
and some white paint or white plastic sheet to put around the walls for relfection. (dont use foil)
1 timer that your lights can plug into so you can set it for flowering and vegitation. lights on and off.. 12/12 flowering 18/6 veg.


NOTE (your going to stack these containers on top of each other open ends facing each other.)

(((make sure you painted the walls white or put the white plastic sheet on the inside of the walls before you do all this stuff.)))


Putting it together: (the top container)
on the bottom of 1 container drill 2 holes for the lights to go in and cut a square (or 2 if you have 4 fans) on the side of that same container dosent matter what side. (the reason your doing it on this container is because heat rises and the heat will escape better if the fans are at the top). (this container will be the top) also make sure to get the biggest ones they have so your plants can grow nice big and stealthy.


Putting it together (the bottom container)

cut a square (or 2 if you have 4 fans) on the side of this container for air to come in.. mount a thermometer that can measure the heat inside the container on the side of the wall. (try to aim for about 80 - 82 degrees)

now put your plants in the bottom container and close it.

let them do there thing and check on them.

thats about it xD

Kb420Kb
01-23-2007, 01:31 AM
i was typing it stinky -.- but ya you can do a fridge also man. thats a good idea.

bluntman 420
01-23-2007, 01:54 AM
i thinku should do what im planning to do. take an old dresser. take out each droor and cut out the box part that holds ur clothes so u just have the face to the droor...nail all the faces to a piece of plywood or something, get some hinges and hang it back on ur dresser. u could have ur intake and exhaust fans in the back. and i was planning on taking a coffee can and stuffing it with activated carbon and attatching a piece of pvc pip and getting a fan to fit in there to work as a scrubber :) good luck!

spankey
01-23-2007, 08:28 AM
[attachment=o114674]
here are the dementions of a storage cabinet that i found on the net.

Depth (In Inches) 19 In
Height (In Inches) 70 in
Width (In Inches) 30 in

not sure if that is interior specs or interior

would i be able to at least grow 3 plant in a scrog and have a clone chamber.

if so what do i need to deal with oders, and ventalation and what kind of lights, and should i go hydro or dirt. i have c99 seeds.

trynagethigh
01-23-2007, 09:10 AM
That will work with some mods. Want stealth?Check out my post about 2 posts before yours. Im using a big screen tv that didnt work.

Tryna

spankey
01-23-2007, 09:25 AM
That will work with some mods. Want stealth?Check out my post about 2 posts before yours. Im using a big screen tv that didnt work.

Tryna

ya i saw that but i don't have a dead bigscreen tv. what mods would i need to do?

spankey
01-24-2007, 01:20 AM
ok let me try this one step at a time. after i put the cabinet together and i divide the area into 2 sections how tall should i make the scrog grow area? and what kind of light should i get for my scrog?

bluntman 420
01-24-2007, 05:05 AM
u can SCROG as high as u want. as for lighting, if u have the money for it, a 600w metal halide would be ideal for veg and a high wattage hps for flowering. im no expert but i try to help lol.

spankey
01-24-2007, 09:52 AM
umm i was thinking 2 250 hps becaust the area to be covered with light is 19" X 30" can i grow 3 scrog plants there. so what would a good hieght be i am going to grow c99's. i need to divid the total height in to 2 compartments. the height of the cabinet is 70". also should i use dirt or hydyo. it will be able to get plenty of my time i am disabled and am at home all day most every day.

bluntman 420
01-24-2007, 11:49 PM
well hydro is way better than soil if u can afford it. and instead of two 250w hps just get one 600w hps. ive never grown scrog so i really cant tell u how high u want ur plants to be. do u have a way to make a clone chamber? if so then do that. but if ur a first time grower i wouldnt recomend hydro, i hear it can be confusing and what not. anyways good luck and keep us posted!

spankey
01-25-2007, 05:19 AM
ok so now i am thinking 1 400 or 600 hps depending on there cost. and what i can find. so now i need to know how much of my 70" hight to convert to a scrog grow and how much to use for cloning. scince this is my first grow i am gfoing to go dirt. so the next advise i am going to need is

1. scrow and clone hights (max of 70")

2. temp control.

3. odor control

any help on this would be great.

Chronic Chrissy
01-25-2007, 05:36 AM
I use parts of a dryer. Check out the thread in my sig. But I'm assuming stealth means you don't want it to look like a grow op, so maybe that won't work.

spankey
01-25-2007, 05:49 AM
ya i saw that pretty cool set up. but ya stealth in my case means someone in the room while in operation has no idea it is there.(no one will be in there long though) i also have a daughter that comes over everyonce in a while and if she finds my grow she will steal it.(she is 27 )

JackdaWack
01-25-2007, 06:30 AM
i would say u want at least a 3 feet mayb 4 to work with depending on where the base of the plants is going to be, a 400 will be more then enough, a 600 will burn unless used with a vented hood. the veg area doesnt need to be as big maybe 2 feet or 3 with the mother. and that extra foot can be used for clones. good fans to use... get a vortex high cfm fan there quite and put a carbon scrubber on and thats it. thats pretty mUch a full set up.

spankey
01-25-2007, 08:28 AM
ok what lights do i need for the mother and for the cloning chamber. and what do i use for the clone starters base medium. and a much cheaper fan. and any advice on a carbon scrubber.

canuck grower
01-25-2007, 04:49 PM
Hey man looks like you're on the right track and have done some research. :thumbsup: I'm not an experienced grower but I have had a chance to make a few mistakes building my cab so hopefully I can help you out.

You can use CFLs or T5s for the mother/clone chamber. CFLs are going to be significantly cheaper so I would use those. The clone chamber could be about 2' and that would leave almost 5' for the scrog chamber. I think that would work well if you keep a short "bonsai mom" ... something well documented here and on icmag now that you know what to search for. :)

To start clones, that's something you should probably do a little more searching on. Some people like jiffy pellets, some like rockwool, some use soil directly.

Ok for the fan let me say this. I thought I would save money on the fan so I tried out a 6" inline fan that claims to move 250cfm. Met with any resistance it would slow right down and apparently they are for keeping air moving along a duct and not doing the moving themselves. I didn't know that before and now I've ended up buying a Vortex anyway. Till then I had to keep my cab doors open with a fan blowing into it. That's with a 250W HPS in a cool tube ... and it's not summer yet.

You'll need a good fan in order to keep a 400W light cool and Vortex are what people say are the most quiet. Most threads I've read result in the person buying a Vortex in the end anyway so you could very well save money by getting one up front. Also look at it this way: Vortexes have a 10 year warranty. If you spend $200 on a fan that will last at least 10 years that's only $20 a year, assuming you throw it out after 10 years. That's less than $1 every two weeks.

With a fan it comes down to 3 things: soft volume, price, and effectiveness. You can choose any 2 of those and find a fan to meet your needs. You need soft volume and effectiveness so you have to compromise on the price. If price is more important you are going to have to sacrifice one of the others, as a tough a decision as that may be. You can get a squirrel cage blower for half the price of a Vortex but I hear those are loud.

I'm not a Vortex salesman I promise, just someone who wishes they had the cash for a vortex at the beginning. If can work it out in your budget I highly recommend not cheaping out on the fan like I tried to do. :twocents:

I built my own scrubber following bodom's design: http://boards.cannabis.com/growroom-setup/90173-how-carbon-filter.html ... I use the silica gel kitty litter in mine because it's cheaper and it does work well. If you have the time I recommend you build your own for around $20 and then use any cash from your scrubber budget on the fan.

-canuck :jointsmile:

spankey
01-25-2007, 06:00 PM
so now all i need to know now is the best soil mix and the size and type of pots to use. since this is going to be my first grow i am going to use soil.

my grow area is 30" X 19" X 36"

i am doing a scrog. with cindy 99.

i also need to know how many plants i can grow. i would like to grow 3 if that is possible.

spankey
01-25-2007, 08:40 PM
ok i think i have what i am going to do for my scrog grow area part of cabnet

so here is what it is

i am going to use this cabinet and divide it to a 36" (3') scrog grow area

[attachment=o115111]

i am getting this 400 wat hps light with the pyrex cool tube self build

[attachment=o115112]
[attachment=o115113]

i am going to use this fan with the carbin scrober from the How To - Carbon Filter faq

Vortex 8" Fan
[attachment=o115114]


[attachment=o115115]


and i am going to put a scrubber into each shelf that is seperating the scrog area from the mother area and the cloning area. and the in line fan venting out the cloning chamber so the fan sucks air into the grow area then through the scruber into th mother area then into the clone area then out of the cabinet into another scrubber.

and a small fan on the cool tube

but i still need to determine the pots and soil issues i need help to get big enough pots and yet controll the hieght to the soil scince i only have 36".

please tell me what you all think.

keeko
01-25-2007, 11:41 PM
well spankey, ive done this many times(brag about somebody elses grow) if your looking for a stealth scrog look at this. he has his tv sitting on it so underneath you might think he has a dvd player or tape player or something.

http://boards.cannabis.com/closet-cabinet-growing/52326-lovely-ladies.html

keeko
01-26-2007, 12:13 AM
oh just in case you didnt want to read through all of that its post # 35 that shows his whole setup:thumbsup:

spankey
01-26-2007, 05:46 PM
ok i would like now a good soil mix. i also am thinking about using peat pots that you can put directly into the next pot for trans plant. also what size pots should i use for.

1. seedlings
2. beginning veg
3. final pot.

also when do i transplant into the next pot.
also need info on nutes and water schedule

divestoned
01-26-2007, 05:52 PM
those c99 seeds may not be best for cabinet grow spankey...they grow quite long arms and take up more space than the bud weight is worth...however it is excellent smoke.

spankey
01-26-2007, 09:39 PM
those c99 seeds may not be best for cabinet grow spankey...they grow quite long arms and take up more space than the bud weight is worth...however it is excellent smoke.

Ok then what should i grow for a scrog (i have not ordered my seeds yet)?

i want a very easy plant to grow that clones well and is very potent and is good for scrog. i also just bought 3" peat pots i would like to know what size pots i need to transplant to. Should i just do the one transplant?

bluntman 420
01-26-2007, 09:44 PM
i would say try grapefruit by femaleseeds.nl (i think) i heard its a easy plant to grow. or u could try lowryder/lowryder2 seeing as u only have a couple fett of space to grow. best of luck to you!

Chronic Chrissy
01-26-2007, 10:00 PM
My Northern lights are short, bushy, and so far odorless. They are also cloning easier than my Afghanis. Alot of people here have told me that they produce well and I know first hand it is a great high.

keeko
01-26-2007, 10:03 PM
i was gonig to suggest Norther lights also, i just finished up some femaleseeds.nl northerlights and it turned out great.....like chronic chrissy said they were very low odor and they were nice dense nugs

spankey
01-26-2007, 11:04 PM
i would say try grapefruit by femaleseeds.nl (i think) i heard its a easy plant to grow. or u could try lowryder/lowryder2 seeing as u only have a couple fett of space to grow. best of luck to you!

femaleseeds.nl does not send to america. northernlights is kinda common in washington state. i am looking for something that willWOW my friends. oh and i can't use lowryder/lowryder2 they are auto flowering and i need to clone and keep a mother plant(i want to have a regular recuring harvest) since i will be doing a scrog i will really need a clone set up.

so how about white widow(i heard it stays small and is an easy grow) or someone give me some other sugestions please.

bluntman 420
01-26-2007, 11:27 PM
take their advice before u take mine. they are far more knowledgeable than i am. northern lights is really good bud. if ur looking for something short and bushy then ur gonna want and indica strain. ive never ordered seeds online. im going to for my next grow. good luck and keep us posted!

spankey
01-27-2007, 07:23 AM
ok so i will do northern lights.

ok i am going to use a serile potting mix/perlite mix 50/50. i start them in a 3" peat pot. so what size pot do i get for the rest of the grow?

Hagbard Celiene
01-27-2007, 07:54 AM
12 Dry Quart (3 Gallon)
10.625 inches diameter by 9.00 inches deep. Holds approximately 605 cubic inches (9.9 liters) of media.

20 Dry Quart (5 Gallon Squat)
13.00 inches diameter by 10.625 inches deep. Holds approximately 968 cubic inches (15.9 liters) of media.

Chronic Chrissy
01-27-2007, 03:21 PM
I(f you have the room for the 5 gl go for it, I'm using 3 gl and they seem to be fine. My readings say that plants shoud beable to be comfy in those for 2-3 months but after 2 weeks in them I can see roots peaking through the drainage holes. I'm going to dig out that passage for you I'll be back.

Chronic Chrissy
01-27-2007, 03:27 PM
This is from the bible, page 105-106

PLANT AGE CONTAINER SIZE
0-3 weeks Root cube
2-6 weeks 4 inch pot
6-8 weeks 2 gl pots
6-8 weeks 3 gl pots(I guesss it depends on the strain and size)
2-3 months 3 gl pots
3-8 months 5 gl pots
6-8 months 10 gl pots

also...
CANNABIS CLUE:
Aloow one gl of soil or soiless mix for each month the plant will spend in the container. A 2-3 gl pot supports a plant for up to 3 months. A 3-6 gl pot are good for 3-4 months of rapid plant growth.


Hope that helps

spankey
01-27-2007, 04:22 PM
This is from the bible, page 105-106

PLANT AGE CONTAINER SIZE
0-3 weeks Root cube
2-6 weeks 4 inch pot
6-8 weeks 2 gl pots
6-8 weeks 3 gl pots(I guesss it depends on the strain and size)
2-3 months 3 gl pots
3-8 months 5 gl pots
6-8 months 10 gl pots

also...
CANNABIS CLUE:
Aloow one gl of soil or soiless mix for each month the plant will spend in the container. A 2-3 gl pot supports a plant for up to 3 months. A 3-6 gl pot are good for 3-4 months of rapid plant growth.


Hope that helps

yes it does oh by the way do you have the ebook version of thay book if so could i have the link to get it my self.

i was reading up so my first grow is going to be a regulat grow so i can get clones of a female plant so i can create my mother plant. so i also am going to change my cabinet design a bit and then design a mother cabinet. my new design is 30" X 19" x 48" grow area and a cloning area that is 30" X 19" x 21" .

so i have 3 more questions now. will probable end up with more later.

1. what light do i need for my clone area? t needs to fit in the area that my cloning area is.

2. what do i use to put my clones in. are 3" peat pots good or do i need to buy one of those nifty cloning setups all thase grow sites are selling on the net?

3. how many plants can i sucessfully grow in my 30" X 19" x 48" grow area and not over crowd them?

see i already have a fourth.

4. anyone know where to get mylar or relectix cheaply. or do you all know where i can get something to make the walls and doors not glow. hehe it is a kinda thin plastic material that the light makes glow in the dark. it is kinda eery to see. i figure if i cover every single piece of the interier with mylar or relctix and use that relective aluminum tape for all the seems i can make a very shiny and light proof grow area. that stops that glow.

also thanks everyone for your assistance you all have given me more help then any of you could have known.

Chronic Chrissy
01-27-2007, 05:17 PM
1. I use a 2' 20w tube flourescent just because I had it kicking around for veg/clones you want cool white.

2. For clones pick up a small pack of rockwool cubes, I tried soil and lost my clones within a day, Now with the rockwool cubes every clone from my first batch is now rooted. You also want some rooting gel, a tray with a moisture dome, and a misting bottle. Another good idea is a heating pad or some way to keep the clones at 80 F. You also want a 16/8 light cycle here's why...http://boards.cannabis.com/grow-faqs/99457-why-should-i-turn-out-lights.html

3. I don't know

4. check out my pics link and find the pics of my flower room. I made a 2x4 frame and went to my Grow Shop for the plastic. It is thick, durable, washable, it's white and 85% reflective, and the other side is black. It's light proof. It came 10' wide at $1 a foot! I think it's called visqueen Visqueen Plastic Black/White (http://www.plantitearth.com/store/product.asp?pid=115&catid=1)
My Flower room cost me

$11 for plastic
2x4s I already had
$5 a roll of duct tape
$20 bathroom exhaust fan
$10 for 10' of reflective dryer tubing

Then of course the ballast and light

Oh and if you want to keep a mother I would suggest checking this out International Cannagraphic Magazine Forums - ALL ABOUT BONSAI MOMS/MUMS (http://www.icmag.com/ic/showthread.php?t=31919&highlight=bonsai+mom)
I'm just starting to experiment with this and am very excited.

The book is called Indoor marijuana horticulture, the indoor bible, by Jorge Cervantes
He has a site MarijuanaGrowing.com by Jorge Cervantes (http://www.marijuanagrowing.com).

Have you checked out the pics of my set up? Sorry I just love showing it off, since I really don't show anyone around here for security reasons.

Hate to ask man, but could you shoot just a little rep my way

spankey
01-27-2007, 06:19 PM
how do i give you rep? sorry to be such a noob

Chronic Chrissy
01-27-2007, 07:16 PM
I just learnt about rep myself. See above my name where the date in in the green bar? Follow that green bar right to the end and there is a little scale, click on that and fill in the blanks. Anytime some one give you great info shoot them some rep, if they give you bad info that's completely bogus you can click on disapprove. That's how people get or loss those little green boxs by their info.

spankey
01-28-2007, 09:24 PM
1. I use a 2' 20w tube flourescent just because I had it kicking around for veg/clones you want cool white.

2. For clones pick up a small pack of rockwool cubes, I tried soil and lost my clones within a day, Now with the rockwool cubes every clone from my first batch is now rooted. You also want some rooting gel, a tray with a moisture dome, and a misting bottle. Another good idea is a heating pad or some way to keep the clones at 80 F. You also want a 16/8 light cycle here's why...http://boards.cannabis.com/grow-faqs/99457-why-should-i-turn-out-lights.html

3. I don't know

4. check out my pics link and find the pics of my flower room. I made a 2x4 frame and went to my Grow Shop for the plastic. It is thick, durable, washable, it's white and 85% reflective, and the other side is black. It's light proof. It came 10' wide at $1 a foot! I think it's called visqueen Visqueen Plastic Black/White (http://www.plantitearth.com/store/product.asp?pid=115&catid=1)
My Flower room cost me

$11 for plastic
2x4s I already had
$5 a roll of duct tape
$20 bathroom exhaust fan
$10 for 10' of reflective dryer tubing

Then of course the ballast and light

Oh and if you want to keep a mother I would suggest checking this out International Cannagraphic Magazine Forums - ALL ABOUT BONSAI MOMS/MUMS (http://www.icmag.com/ic/showthread.php?t=31919&highlight=bonsai+mom)
I'm just starting to experiment with this and am very excited.

The book is called Indoor marijuana horticulture, the indoor bible, by Jorge Cervantes
He has a site MarijuanaGrowing.com by Jorge Cervantes (http://www.marijuanagrowing.com).

Have you checked out the pics of my set up? Sorry I just love showing it off, since I really don't show anyone around here for security reasons.

Hate to ask man, but could you shoot just a little rep my way

i still cant see how to give you rep maybe i am still to much a noob or something.

but that bonsai mum faq was so intense i coppied it to word and printed it so i can study it better.

after listening to the grow reports (im addicted to them now) im thinking of altering the grow room a bit. im thinking of turning the whoe cabnet into a grow room and a small clonning chamber and pull clones off before flowering then later on build another mother cab. in the grow reports he talks about a dirt method that soiunds very cool that you put airstones in the dirt and in the run off waste water. he sais you get almost as good results as hydo.

like i said earlier you all have been wonderful with your advice. but now those reports are giving me new ideas and it kinda scares me i don't want to totlay screw up my first grow. hehehe i thought when i decided to grow all i needed was a light, a bucket of soil, peters fertilizer, a seed and water. hehehe boy was i wrong!! it is a true science to growing.

ok here is my problem now i can afford a soil meter for ph and moisture. but i can only afford 1 of the following water ph meter or ppm meter whats more important. for my first grow.

Chronic Chrissy
01-28-2007, 10:11 PM
lol you're such a noob, lol J/K. Just click on the scale attached to the top right hand corner of my pst in the green bar and write a quick comment why you're giving me rep and click the button below. If you can't figure it out no worrie. As for your question I really don't know it depends on how heavy into the nutes you want to get. I got the pH tester where you fill the little tube and add drops for like 10$, and with that you can test the water, and put soil in there with plain pH water shake it, let it settle then test the water to find out your soil pH. O don't have a ppm meter, wish I did, but I use Advance Nutrients and they have a nutrient calculator on their site that tells you exactly what to mix of all the extras, including things like the 3 part nute system, big, bud, cal/mg, and carbo-load, It takes all the guess work out.

spankey
01-28-2007, 10:23 PM
there is no scale by your name only by mine. and when i click it it says i have 10 rep points and on one has rated that post.

spankey
01-28-2007, 10:37 PM
damn i wish i could give you rep. you have been so helpful. i can't figure it out so i will post it here.


Chronic Chrissy is the bom she has been hel:rastasmoke: pful above any of my expectations she is wonderful.

i hope that makes up for me not being able to give you proper rep!!

oh by the way whats the web site with the nutes and there calculater?

Hagbard Celiene
01-28-2007, 10:57 PM
props to Chronic Chrissy. and the scale is on the right of the screen... across from the name.
(http://boards.cannabis.com/../members/chronic-chrissy.html)

Chronic Chrissy
01-28-2007, 11:05 PM
damn i wish i could give you rep. you have been so helpful. i can't figure it out so i will post it here.


Chronic Chrissy is the bom she has been hel:rastasmoke: pful above any of my expectations she is wonderful.

i hope that makes up for me not being able to give you proper rep!!

oh by the way whats the web site with the nutes and there calculater?

Screw the scale and rep, That right there^^^ is all I need, to know that I've helped you out and you know a little more than you did before is enough to make me feel good. It really doesn't compare to a stupid little green block.

canuck grower
01-29-2007, 01:53 AM
You can't give rep until you've posted 50 times and have been a member for 6-7 days or something like that. Same with attaching photos. So you'll just have to wait a few days to give Chrissy some rep.

Welcome man, can't wait to see some pics! :jointsmile:

Chronic Chrissy
01-29-2007, 02:21 AM
You can't give rep until you've posted 50 times and have been a member for 6-7 days or something like that. Same with attaching photos. So you'll just have to wait a few days to give Chrissy some rep.

Welcome man, can't wait to see some pics! :jointsmile:

See I didn't know that, you learn some thing new everyday.

spankey
01-29-2007, 07:19 PM
as soon as i am able 2 i will go back and give each post some official rep :D

i am tempted to do a small practice bag seed grow with cfls before i build and grow in my cabinet. scince i am low on funds and have to buy piece by piece. so i am going to do a small tub grow and by the time it is finished i should have all the parts and the big cabnet ready to go for the real grow that will produce a real goos yeild. that way i have some smoke while i watch and baby my cab grow and have some grow experience.

keeko
01-29-2007, 11:10 PM
femaleseeds.nl does not send to america. northernlights is kinda common in washington state. i am looking for something that willWOW my friends. oh and i can't use lowryder/lowryder2 they are auto flowering and i need to clone and keep a mother plant(i want to have a regular recuring harvest) since i will be doing a scrog i will really need a clone set up.

so how about white widow(i heard it stays small and is an easy grow) or someone give me some other sugestions please.

the company femaleseeds.nl. doesnt ship personally but seed banks buy from the company and sell to the public. And i have found that homegrown bud is almost always better than the bud i buy from dealers(unless they're the grower), people do say northerlights is common, but until i grew it myself i had never seen anything like it, but you also come from a state that is more forgiving than my state.

Good_Vibrations
01-30-2007, 07:51 PM
Chronic Chrissy.

I have been working on some cab ideas for a while and I like the flower room you've made with 2x4s and panda plastic.

Out of curiousity, could you hook up a step by step? If you know how to send me a message directly on this site, go for it (I can't figure it out). Otherwise I will be back to check up on this.

Respect.
G_V

Chronic Chrissy
01-30-2007, 08:07 PM
Check out my log and keep an eye on it when I find time I'll lead you through it. There are also pics in my link below, just not on the first page. I'll find time I promise.:p

Chronic Chrissy
02-13-2007, 03:35 AM
GV I did post how to build my room in my thread for you, I just forgot where you were. Hope you find it.

JackdaWack
02-13-2007, 03:53 AM
this is like newb central...lol.

420Paul
02-13-2007, 10:08 PM
I think you could easily, split that storage cabinet in half, One, section for growing, the other, for a mother plant, and a small clone area, for HEAT issues, I'd suggest, doing the two 250wts, on your flowering section, because if heat gets too intense, atleast you can turn one off. For the cloneing area / mother plant area, dont waste your money, get some CFLS!