PDA

View Full Version : Build your own Odor Neutralizing Machine - Intro



hewhispers
01-15-2007, 02:49 PM
This is an old post from another board that was buried.
I thought it was worth poaching in case the original thread was deleted or moved. The original post was found here: http://www.cannabisculture.com/forums/showflat.php?Cat=&Number=198140&page=0&view=collapsed&sb=5&o=&vc=1
Enjoy.

Build your own Odor Neutralizing Machine
You will need:
1. A five gallon bucket
2. A "muffin" fan, or a round fan of some sort that has the motor built into the compact frame of the fan. (See pics and you will understand.)
3. A drill
4. A one pound container of Soil Moist, which is a water absorbing crystal. You can find it at almost all nurseries and grow shops.
5. ONA, or Odor Neutralizing Agent. You can get it at most grow shops or "baby" shops for new mommies.
6. A 5 gallon bucket lid, which may be optional.

hewhispers
01-15-2007, 02:51 PM
Step 1.

Get yourself a muffin fan, or a Durex brand or Holmes brand circular fan with base. They are very common at Wal-Mart and can usually be bought for less than $8 US. The reason you should get this brand of fan is because after you have removed the base, it fits perfectly into a five gallon bucket.

hewhispers
01-15-2007, 02:52 PM
Step 2.

Using a flat screwdriver, pry of the nubs on the base and remove the screws.

hewhispers
01-15-2007, 02:53 PM
Step 3.

Remove the fan from the base. Keep all the parts in case you might want the fan again someday.

hewhispers
01-15-2007, 02:56 PM
Step 4.

Place the fan into the five gallon bucket, front side up. If you bought the Holmes brand fan pictures here it will fit VERY snugly. You don't even have to secure it in place.

(If it is smaller than the opening, then cut a hole, smaller than the diameter of the fan, into the bucket lid. Use some floral wire and secure the fan to the lid so that you can place the lid onto the bucket.)

hewhispers
01-15-2007, 02:57 PM
Step 5.

Drill about 8 or 10 holes around the bucket.

hewhispers
01-15-2007, 02:58 PM
Step 6.

Remove the fan/lid and put about 9 cups of water into the bucket. Then put about 1 cup of the ONA into the bucket and mix it up. Be careful, it can smell pretty strong at first.

hewhispers
01-15-2007, 03:00 PM
Step 7.

Put about a cup or two of the soil moist into the bucket.
Make sure that all of the liquid is absorbed.
You don't have to use alot!
The crystals expand to about 50 times their size.

hewhispers
01-15-2007, 03:02 PM
Step 8.

Set the fan on the lowest setting and put it back on the bucket.
Plug it in and put it somewhere in the corner of your grow room.
You will notice a difference in about 5 minutes!

You may need to tweak it for your own grow room, but that's the basic design.

Done.

Enjoy.

hewhispers
01-15-2007, 03:45 PM
The one tweak I would suggest: Drill larger quarter size holes.
It will increase airflow.

Also: the original design calls for the fan to be blowing OUT, but some have set it up to blow air INTO the bucket.

TheGreenFog
01-15-2007, 03:59 PM
Very nice design. I like it. I saw that one on CC.com a while back.

Similar to Postmandave's DIY odor Neutralizer (http://boards.cannabis.com/showthread.php?t=59316)

:thumbsup::thumbsup:


The Fog :rastasmoke:

hewhispers
01-15-2007, 05:47 PM
You know....his looks better than this one, which I did poach from another board.

Postmandave had his as "odour neutraliser" when I was looking for Odor Neutralizing. Silly Queens English!

Thanks for the find!

TheGreenFog
01-15-2007, 06:59 PM
NP, mang.

Shhhh. ;)


The Fog :rastasmoke:

ManOHman
02-06-2008, 02:05 AM
Cool

hanayama
02-06-2008, 02:56 AM
the major difference i see is the use of soil moist.
what does this do for it hewhispers??