Cabon filter and fans..HELP!

[MrGreenFingaz]

Whatsup all, well i have a few problems before i start my growin up again :dance:. I have a 400w hps (havnt used yet) what i was wondering is do u think that any of these ideas with a carbon filter and a ~250cfm fan would effectively cool my grow room and filter the air efficiently as well? The 1st pic is the carbon filter idea being in the grow room with the air sucking through it before getting expelled. the second is the carbon filter on the outside of the box with the air getting pushed throught it (not as stealthy but might save some grow space.) btw, my space is gonna be about 2x3x6. Or i was thinking i could make a non-conventional carbon filter and have the air blowing through it (as seen in the 3rd pic. It has 2 open ends with the carbon in the middle, a fan attached to one end, and the other end open to allow air to pass through the middle. The fan can either blow or suck air through this.) Which idea do you think would be best? Oh yea, also i have a *420* cfm fan that is too loud, do any of u know any good quiet fans, the cheaper the better but any quiet fan suggestions would be good, im looking for a 240+cfm fan. Thanks for any help/suggestions. SHIT! ALL THE FUCKIN PICS I DREW DONT MEET SIZE LIMITS... and i dont know how to resize that shit so fuck, i hope u have a good imagination, im fuckin pissed.


This is the one i bought that is way too noisy(after i saw the cfm i had to get it :rasta:)-------------------------

http://cgi.ebay.com/8-Aero-Flo-Model-Duct-Fan-420-CFM-Many-in-Stock_W0QQitemZ150063194989QQihZ005QQcategoryZ2059 8QQrdZ1QQcmdZViewItem

these are the other ones im looking at now---------------------------

http://cgi.ebay.com/IN-LINE-DUCT-FAN-6-inch-110VAC-250-CFM_W0QQitemZ290051901498QQihZ019QQcategoryZ43555Q QrdZ1QQcmdZViewItem

http://cgi.ebay.com/Dayton-Blower-265-CFM-Exhaust-Fan-Hydroponics-HPS_W0QQitemZ250052302440QQihZ015QQcategoryZ3186QQ rdZ1QQcmdZViewItem

[doco]

If you have MS Windows, just use MS Paint to open the file, go to Image in the File Menu, select Stretch/Skew and enter a percentage of the original size. Close, save & upload, viola! :thumbsup:

[MrGreenFingaz]

hey, tx for the input but actually i figured that out already. but then after i resized them it said they were too large in size. these are microsoft paint(bmp) images, got any clues?:confused: :confused: :confused: :confused:

[crazywill]

Hey MrGreenFingaz
Take a look at www.plantlightinghydroponics.com they have the fans you are looking for.In that small of space a 4"vortex can fan would do it for you.
The 4"fan has a 172 cfms and 49 db noise level,the 6"fan has a 449 cfms and the same 49 db noise level too.The 4" fan is 9.5" H and 8.5' wide,the 6" fan is 13.0"H and 10.5" wide.The 4" fan is about $109.90 and the 6" is about $149.90 plus s&h .I have the same problem with MS panit too.
Have a Good One. Peace

[dusto2k3]

when you go to save the pics you create, when u go to save them, save them as "File Type" .JPG. Then you should be able to upload