my bong is finished

[invision]

i found a nice vase while out shopping and couldnt help but imagine the bong this could be, its super heavy duty glass 1/4inch thick and about 24" high all she needed was a hole drilled for a downstem.

well this was easy as i work in a machine shop and all tools i needed were there, all i used was a simple drill bit and a drill press and drilled my hole, then went to the headshop and got a simple downstem/bowl setup to get me going for now.

plan on upgrading the bowl later but man is this thing a freaking lung buster :thumbsup: it delievers twice the hit my other bong does with zero throat burn, simply put this bong will hurt you :dance:

cost of vase- $4.87

downstem/bowl- $15.00

so for 19.87 i made a bong probly worth $150.00 :dance:

[Its a Plant]

You didn't make that.

It's a nice bong though.

Don't lie. ~

[invision]

dude.......lol hold up i have a pic of the drilled hole......

[Inferius]

nah you didn't make that.
I saw your thread a long time ago but didn't say anything.
That "vase" design is exactly like what you could buy in a head shop.

[invision]

hmmmm sharp edges.......all jagged.......i would hope they would do a better job than that at the glass blowers.........i dont lie i have zero reason too.

[invision]

if you want the price tag is still on the bottom....want a pic of that too just incase?

you know i was sharing how easy it was i didnt think id be crucified for it..............

[Its a Plant]

Lol you don't have to try and prove to us that you made it, because you didn't.
I've seen that spiral-design on so many glass bongs just like that. Drop the charade.
Some vase, eh? ~

[invision]

dude i drilled a fucking hole not blow the glass are you a fucking idiot?

[dryst]

i belive him :p lol nice job btw :D

[Dmo18]

honestly where can you buy a vase that looks like that, with the blue and white washed out look and the spiral handle up the side, besides a head shop

[tootsie roll]

i found a nice vase while out shopping and couldnt help but imagine the bong this could be, its super heavy duty glass 1/4inch thick and about 24" high all she needed was a hole drilled for a downstem.

well this was easy as i work in a machine shop and all tools i needed were there, all i used was a simple drill bit and a drill press and drilled my hole, then went to the headshop and got a simple downstem/bowl setup to get me going for now.

plan on upgrading the bowl later but man is this thing a freaking lung buster :thumbsup: it delievers twice the hit my other bong does with zero throat burn, simply put this bong will hurt you :dance:

cost of vase- $4.87

downstem/bowl- $15.00

so for 19.87 i made a bong probly worth $150.00 :dance:


That is beautiful! Fantastic job invision. Really.:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:

[tootsie roll]

hmmmm sharp edges.......all jagged.......i would hope they would do a better job than that at the glass blowers.........i dont lie i have zero reason too.


Is that a Pier1 vase? Looks like a style they'd have.

[invision]

well thank you i hope atleast someone can take this info and use it, it took maybe an hour to drill it i started using a 1/8th inch drill and worked my way up every single size untill the downstems rubber gromet fit snug.

[tootsie roll]

honestly where can you buy a vase that looks like that, with the blue and white washed out look and the spiral handle up the side, besides a head shop

Pier1, Kohls and lots of places right now.
The 50's-60's retro look is in big time right now.

[invision]

Is that a Pier1 vase? Looks like a style they'd have.

it got it at burlington coat factory they had tons of them and one that was taller i just didnt want something that tall.....i bet i could sell these :D

[tootsie roll]

well thank you i hope atleast someone can take this info and use it, it took maybe an hour to drill it i started using a 1/8th inch drill and worked my way up every single size untill the downstems rubber gromet fit snug.

Sorry you're getting banged on here dude cuz your homemade bong looks really cool. I like it.
Pier1 has this really cool swirley red and white one that can be bongified.:)

[invision]

honestly where can you buy a vase that looks like that, with the blue and white washed out look and the spiral handle up the side, besides a head shop

honestly that fine because i guarantee one person here is going to try this and be like "holy fuck he wasnt lying" so jokes on you :thumbsup:

[tootsie roll]

it got it at burlington coat factory they had tons of them and one that was taller i just didnt want something that tall.....i bet i could sell these :D

That was another thought I had.... Burlington or World Market.

I bet you could make some serious bucks on those. You don't need to mention your cost to buyers. Charge at least $50.00

[invision]

i might go back for the taller one of the same color and give it away to a friend cause i know everyone is going to want it

[tootsie roll]

honestly that fine because i guarantee one person here is going to try this and be like "holy fuck he wasnt lying" so jokes on you :thumbsup:

I know you're not lying. It was darn nice of you to let cann members on to this wonderful creation.

hang on, my friend is on Letterman right now

[dryst]

u should make em and sell em....i would...u spent like $20 on that u could sell it to a firend for $60-$70

[suhl]

if it isnt fake, how about you post a picture of the vase before drillin any hole. i mean if you took a picture of it with the hole drilled into it without the piece to hold the slide surely you were took a picture before you drilled that. please show it, because that looks suspiciously like many many bongs i have seen and not like many vase i have seen. after all you can remove the piece to hold the slide on any bong but there arent holes in vases. please prove yourself. a lot of people dont have a reason to lie on here but do anyway, we have seen fake blunts, apparently every other kid smokes with their parents here, apparently every fifteen year old kid can get good bud for next to nothing, and apparently some of the best looking weed in the world is mids to them

[RunninOnSavedKarma]

job well done invision

[tootsie roll]

i might go back for the taller one of the same color and give it away to a friend cause i know everyone is going to want it

That's a nice way to start up a bizz. Word of mouth and "the wants " will sell them.:thumbsup:

[Captin]

nice work, i remember reading your posts when you first started, turned out great! :thumbsup: lol sorry, im high and this is a weird question, but are those shit smears on the wall behind the bong? lol i never would have thought that if i was sober. ;)

[tootsie roll]

if it isnt fake, how about you post a picture of the vase before drillin any hole. i mean if you took a picture of it with the hole drilled into it without the piece to hold the slide surely you were took a picture before you drilled that. please show it, because that looks suspiciously like many many bongs i have seen and not like many vase i have seen. after all you can remove the piece to hold the slide on any bong but there arent holes in vases. please prove yourself. a lot of people dont have a reason to lie on here but do anyway, we have seen fake blunts, apparently every other kid smokes with their parents here, apparently every fifteen year old kid can get good bud for next to nothing, and apparently some of the best looking weed in the world is mids to them

All he had to do was cut the hole. invision posted when he bought the vase. We've been waiting for the finished product. :)

[birdgirl73]

It's a beautiful bong, Invision, and it makes perfect sense to me that a glass company could mass-market those as vases for the people who aren't as infatuated with smoking our beloved plant and drilled and equipped as bongs for headshop retailers. It wouldn't surprise me if there were some lamps someplace, too, that have that very same base.

I need someone who can drill a small hole into a thick glass bottle here in the Dallas area. . . . I have a full bottle of cologne that lost its spray top when it fell off the dresser. It's full of my favorite fragrance, but I cant get to it. What sort of machine shop would have tools that could do that?

[The_Sellout]

cost of vase- $4.87

downstem/bowl- $15.00

Having a bunch of people question your credibility over a bong? Priceless

[zip]

i hate faggots that doubt ppl...its annoying.. u may think theres no vases like that but ive seen some...actually in some simple places like ROSS and such..they had vases like that...

anyways...good work on the bong...looks awesome!

[tootsie roll]

nice work, i remember reading your posts when you first started, turned out great! :thumbsup: lol sorry, im high and this is a weird question, but are those shit smears on the wall behind the bong? lol i never would have thought that if i was sober. ;)

What you think you are seeing.............you're not really seeing.

[suhl]

when i see a picture of it without the hole, i will believe it. dont act like it isnt justified to not trust people on here half the members are lying little kids who are insecure and try to make up for it by looking cool online. im not accusing him of it, but i dont believe things on here unless it is from a long time member or there is concrete proof, and i think thats fair

[tootsie roll]

It's a beautiful bong, Invision, and it makes perfect sense to me that a glass company could mass-market those as vases for the people who aren't as infatuated with smoking our beloved plant and drilled and equipped as bongs for headshop retailers. It wouldn't surprise me if there were some lamps someplace, too, that have that very same base.

I need someone who can drill a small hole into a thick glass bottle here in the Dallas area. . . . I have a full bottle of cologne that lost its spray top when it fell off the dresser. It's full of my favorite fragrance, but I cant get to it. What sort of machine shop would have tools that could do that?

Hi,how are you doing?
Almost any shop with tools can do that for you. Send it here and I'll do it.

[tootsie roll]

when i see a picture of it without the hole, i will believe it. dont act like it isnt justified to not trust people on here half the members are lying little kids who are insecure and try to make up for it by looking cool online. im not accusing him of it, but i dont believe things on here unless it is from a long time member or there is concrete proof, and i think thats fair

Maybe you can look up his other thread?:confused:

[tootsie roll]

cost of vase- $4.87

downstem/bowl- $15.00

Having a bunch of people question your credibility over a bong? Priceless

lol....yup

[invision]

LOL no it not shit.....damn i never did really notice that.......fucking camrea

i am going to go see if they have anymore and buy it because i didnt take a pic of the vase before hand but i will go back for the taller one if the have it.

and to everyone else thanks it really wasnt hard you just have to go really easy and slow on the glass.
Birdgirl- i work in a grinding shop there is nothing fancy about my drill press or the drills i used, if you cant trust someone with it and they are sure they can do it then have it done i cant imagine it would cost you much, i personally would charge no more than 20.00 but i can imagine someone who does it all the time and do it in 15min versus my hour.

[invision]

when i see a picture of it without the hole, i will believe it. dont act like it isnt justified to not trust people on here half the members are lying little kids who are insecure and try to make up for it by looking cool online. im not accusing him of it, but i dont believe things on here unless it is from a long time member or there is concrete proof, and i think thats fair

dude serously i help growers out here all the time its where 95% of my posts are i have no reason to lie about a dumb bong.

[invision]

cost of vase- $4.87

downstem/bowl- $15.00

Having a bunch of people question your credibility over a bong? Priceless

that is my new sig......:thumbsup:

[suhl]

you really dont need to prove anything to me, all im saying is ive seen worse here. call me a cynic but i have trouble trusting people over the internet, particularly this site, it is nothing against you, it could have been anyone posting it.

[invision]

you really dont need to prove anything to me, all im saying is ive seen worse here. call me a cynic but i have trouble trusting people over the internet, particularly this site, it is nothing against you, it could have been anyone posting it.

hey i agree 100% with you but i figured i would hold more credit than that man that was rough but nothing against anyone i know thats the reason for everyone response.

[tootsie roll]

LOL no it not shit.....damn i never did really notice that.......fucking camrea

i am going to go see if they have anymore and buy it because i didnt take a pic of the vase before hand but i will go back for the taller one if the have it.

and to everyone else thanks it really wasnt hard you just have to go really easy and slow on the glass.
Birdgirl- i work in a grinding shop there is nothing fancy about my drill press or the drills i used, if you cant trust someone with it and they are sure they can do it then have it done i cant imagine it would cost you much, i personally would charge no more than 20.00 but i can imagine someone who does it all the time and do it in 15min versus my hour.

Did I read that right? LOL, don't charge birdgirl. I wouldn't. Friends do for friends.:thumbsup:

BUT sell those bongs for a hefty price cuz that is way different. YKWIM?

[birdgirl73]

Hi,how are you doing?
Almost any shop with tools can do that for you. Send it here and I'll do it.
Hey, friend. I'm OK. Tired and emotionally exhausted but still basically OK. Our whole family's that way right now, as you can imagine. I don't think I've learned or absorbed a thing that's been taught at school so far this week, which is sad.

I'll try and find a shop nearby. I don't have any machinists in my circle, to be honest, and don't even know where to begin looking. If a local search doesn't pan out, I will indeed send it to you. You will be my heroine if you can make it possible for me to get to my next-to-new bottle of Ysatis de Givenchy! Come to think of it, one of my friends from my teaching days is married to a guy who teaches industrial arts to high school kids. He could probably help me access my cologne, couldn't he?

[Black Water Park]

It's a beautiful bong, Invision, and it makes perfect sense to me that a glass company could mass-market those as vases for the people who aren't as infatuated with smoking our beloved plant and drilled and equipped as bongs for headshop retailers. It wouldn't surprise me if there were some lamps someplace, too, that have that very same base.


i think this might be the case. i know i have seen bongs in headshops just like this, like exactly like this. but you obivously drilled a hole, so maybe there is some big vase manufacturing company, and some pot smoking craftsmen bought a hell of a lot of them and turned them into bongs.... anyways, this is far too much thought for this topic anyways... nice bong!

[tootsie roll]

you really dont need to prove anything to me, all im saying is ive seen worse here. call me a cynic but i have trouble trusting people over the internet, particularly this site, it is nothing against you, it could have been anyone posting it.

Sounds like you had a bad experience on the net. I know it happend all too often so it's something I can relate to. Just some people that I thought were my friends seem to really not be. I was being used as they were the ones that "got me and the others didn't" I felt like I was a pawn. So, I quietly exited the place and have remained quiet about the situation.
Sometimes, you have to pick your battles.

But on this site so far, everybody has been , for the most part, ok people.

Maybe you can feel more comfortable here now. BG is a mod and when I'm here, I won't allow bad stuff when I see it. I have no problem reporting stuff.

[tootsie roll]

Hey, friend. I'm OK. Tired and emotionally exhausted but still basically OK. Our whole family's that way right now, as you can imagine. I don't think I've learned or absorbed a thing that's been taught at school so far this week, which is sad.

I'll try and find a shop nearby. I don't have any machinists in my circle, to be honest, and don't even know where to begin looking. If a local search doesn't pan out, I will indeed send it to you. You will be my heroine if you can make it possible for me to get to my next-to-new bottle of Ysatis de Givenchy! Come to think of it, one of my friends from my teaching days is married to a guy who teaches industrial arts to high school kids. He could probably help me access my cologne, couldn't he?

You know I've been thinking of you and yours and doing what I can from so far away. if you KWIM.
Is there any way to get this weeks lessons on tape and play them while you sleep? Some students record their classes.
Hubby and I would be more then happy to help you with your Ysatis de Givenchy. Hubby is really good and precise. The teacher may have the tools. Have you seen his work/ Is he good and steady?
It's up to you but remember that we'd be happy to help.:thumbsup: :)

(((((((hugs for the family))))))))))

[tootsie roll]

i think this might be the case. i know i have seen bongs in headshops just like this, like exactly like this. but you obivously drilled a hole, so maybe there is some big vase manufacturing company, and some pot smoking craftsmen bought a hell of a lot of them and turned them into bongs.... anyways, this is far too much thought for this topic anyways... nice bong!

Maybe. It is possible that a craftsman saw the vases and bought a bunch with the same idea in mind as invision. totally possible.
Maybe invision should price those and price his accordingly.

[bud breath420]

making bongs from vases isnt that hard.. so why he lie about it? anyway man thats a sweet looking bong you made...

did you make the one beside it, reminds me of one me and my brother made from a beaker we err borrowed i sat there for nearly a day with the glass gutter making sure it was all perfect..

anyway man have fun with that thing and have a few rips for me!

[potsmokingnome]

Very Nice bong, and Priceless posts LOL

[K_Shootz_Den]

Lol you don't have to try and prove to us that you made it, because you didn't.
I've seen that spiral-design on so many glass bongs just like that. Drop the charade.
Some vase, eh? ~

dude stfu, honestly every post i see from you you act like your the all knowing master of everything, i can undestand if you doubt he made it, but dont act like you KNOW its fake, you dont KNOW shit

[Captin]

it's pretty obvious what's going on here, invision went out and bought a $100 bong at a headshop, took some pictures of it, posted them here and said he made it. The plan would have been perfect but it's a plant saw through invisions lies and called him on it. Not wanting to admit defeat invison quickly pulled out downstem and used a knife to chip away at the finely blown hole in the glass to make it look homemade. Took some pics of the hole and posted it. Nice try invison, but you can't fool us... ;)

[Kryzco]

don't hate, appreciate :)

be it fake or real

its still a damn nice bong

[Dmo18]

hey man if you did make it you should give a step by step on how to do it, i have a drill and all the drill bits, so would that work or is it a special drill

[Its a Plant]

dude stfu, honestly every post i see from you you act like your the all knowing master of everything, i can undestand if you doubt he made it, but dont act like you KNOW its fake, you dont KNOW shit
LOL.
dude stfu. honestly every post i see from you you try and call me out for some reason like a child. you dont know shit kid so what you trying to prove? do you have anything more to say than pointing out people's flaws? no? eh?

And it was my mistake thinking it was a fake, but I've seen lies on here before. Although I don't know how sold I am, it doesn't matter. At all. Cool bong. ~

[Skink]

hey man if you did make it you should give a step by step on how to do it, i have a drill and all the drill bits, so would that work or is it a special drill
using my Dremmel method is much safer and more sure... By drilling a hole in glass with an ordinary drill and bit you will most likely crack the glass... keep in mind he said "Machine Shop" and in a machine shop there are only perfectly sharpened drill bits,even with perfectly sharpened bits you have to have a touch when it comes to using a drill press as forcing will most likely crack the glass...

LOLz... a Peir 1 just opened up close to me and I have a Burlington Coat Factory too...

[Nochowderforyou]

I like the bong made from a vase. It's like it was made for making a bong or something. :p Good shit. :thumbsup:

[napolitana869]

Very nice. Do you need a glass drill bit to do something like that? I have a gray goose bottle I wouldn't mind making into a bong.

[Skink]

I give you a 7/10 on the bong and a 1/10 on monitor cleanliness...

[TheGreenFog]

Nice bong, Invision. :thumbsup:

Invision's Bong Project (http://boards.cannabis.com/showthread.php?t=88284)

I'm gonna have to look into doing something like that. :D

:rasta:

TGF

Edit: Oh, but I gotta agree with Skink (<---why does it say you are banned?) about the cleanliness...1/10. Baby wipes? ;)

[stinkyattic]

These are a bunch of home-made bongs from vases.
To drill glass, you have to use a glass bit. A high rpm Dremel works better than the cordless type.
You have to keep the vase under water of the glass will crack from overheating and your bit will get dull.

I have to say I have never seen a vase with a convenient hand-grip of the sort normally reserved for bongs... I'm tempted to go with the doubters. But looking at the 'bong project'... maybe it's legit; if so, it's cool.

[Reefer Rogue]

I don't want relationship, i just want bong bong bong =]

[invision]

well im am dissapointed at the majority of the posts it wasnt meant to turn into a shit fest but it did, i shouldnt have to prove myself here but it pissed me off and im heading out to burlinton coat factory today to pick up another one.

i dont get why anyone would think i would lie i would have just posted check out my new bong if it was store purchased, but it did give me motivation to see if i could make and sell them off so if they still have a good amount i will pick some up and drill them.

[invision]

did you make the one beside it, reminds me of one me and my brother made from a beaker we err borrowed i sat there for nearly a day with the glass gutter making sure it was all perfect..


nope that bong the GF bought at the headshop over a year ago i think it was 65.00 maybe less but right around there, i didnt like how harsh the smoke was unless you added lots of ice but the new bong it clean sailing :dance:

[KL4D4]

Thats funny looks just like this one of mine...

[attachment=o97721]

[invision]

holy crap it does........doesnt matter i know i made it into what it is and soon tonight ill have a nice blank one to take a pic of :)

[KL4D4]

well its obviosuly different as yours is bigger and such but it just struck my eye

[orangeman]

Nice bong, and don't worry. I believe you, I don't see why anyone would lie about something ;).

[andy704]

hey do you know where i can order a stem and bowl like that bc i dont have any headshops around here.

do you just lift your stem when clearing it or what?

[partyguy420]

thats a bad ass bong... i used to have a bubbler that looked similar to that,it was the same shape and everything, just shorter, and it had green instead of blue... i think i might steal your idea... just to sell the bongs to friends for like 50 bucks a bong... maybe 80 to fuckers i dont like.

[partyguy420]

Thats funny looks just like this one of mine...

[attachment=o97721]

just like that one, except green and white... and the handle was black...same height and every thing... except the stem was a home made one.... but none the less... it still got me stoned...:rasta:

[invision]

well here you go i picked up 2 more and a flower style one for my GF, you know its pretty damn sad i was called out for no reason it shows how shitty this community really is have fun and ill make sure i dont post anything further i make..............

[Fan o KmK]

you guys who think hes lying are fuckin dumb. i saw his thread a long time ago asking a question about drilling holes in glass and all that shit, explaining how he found this cool vase.

good job man, looks professional enough for some stupid people to accuse you of buying it. nice job lol.

[Its a Plant]

The only reason you were called out is because there are bongs made JUST like that. Don't keep whining about it. I found it hard to believe that vases were sold that looked like that. I've never seen any like that before as most glass bongs have that same spiral. And I never saw any thread where he talked about them, but yeah, I'm dumb you ignorant child. Plus it's not like they're haven't been liars on here before. "Believe nothing and question everything."

[invision]

The only reason you were called out is because there are bongs made JUST like that. Don't keep whining about it. I found it hard to believe that vases were sold that looked like that. I've never seen any like that before as most glass bongs have that same spiral. And I never saw any thread where he talked about them, but yeah, I'm dumb you ignorant child. Plus it's not like they're haven't been liars on here before. "Believe nothing and question everything."

dude thats no good reason im sorry if you ever back tracked my posts i do nothing but help out here what satisfaction would i get lying about a bong?

helping a new growing save his plants from death is the satisfaction i look for when i come here, too bad really :twocents:

[Its a Plant]

Yeah, and therein lies my mistake. All I had to do was look at some of your posts I guess. You're a rose among thorns though - some on here wouldn't think twice about lying about something like that. It's all good though man. Cheers.

[3rdEyeVision]

Im making a bong out of a big whiskey bottle right now...I was like ten minutes away from being finished with a wine bottle but then I put a big chip in it :(

lol you should used that really big vase though cause it'd be better and no-one would have accused you stupid :p

[invision]

i just picked that vase up tonight i plan and drilling them all and selling of the other 2 blue ones and keeping the flower one for the GF

[NextLineIsMine]

you made that for sure, look at the base- thats a vase without a doubt

[suhl]

i stand corrected, sorry to have doubted you

[tootsie roll]

well here you go i picked up 2 more and a flower style one for my GF, you know its pretty damn sad i was called out for no reason it shows how shitty this community really is have fun and ill make sure i dont post anything further i make..............

:)
I'm glad you showed em. lol
Now go make yourself some big ass bucks selling those. And don't forget who had faith in you.:smokin:

[Captin]

pfft.. you just went out and bought 3 more bongs and took a picture of them with the bowl facing away from the camera, you can't fool us! ;) :smokin:

[Inferius]

pfft.. you just went out and bought 3 more bongs and took a picture of them with the bowl facing away from the camera, you can't fool us! ;) :smokin:

hehehe. Seriously though, it's no fun playing with people who take everything serial. The whole guilt trip shit... ugh.

~Melt away in your one puff- two puff- three puffs a day~

[Skink]

We need an aerial view...

[invision]

so i take it no one was interested except for the fighting part? oh well :(

mods close this thread please, its a shame really all i wanted was to share how it was done and i got raped over it so its not worth it.

[Skink]

don't make the bongs first then show the backs of all you posted...

[invision]

the backs????

the backs of what??

why the hell would i have 3 of the SAME EXACT BONGS that is stupid.

[Skink]

sorry but most people who lie also swear to it,so u need a aerial shot to prove yourself now...

[invision]

oh buddy please really give me a break, what person would purposely go buy 3 bongs of the same just to claim they made them into what they are....think about it.

[Skink]

oh buddy please really give me a break, what person would purposely go buy 3 bongs of the same just to claim they made them into what they are....think about it.

OK then just show the receipts...

[invision]

let me ask you this....what makes it seem so impossible what i did.....its not like i claimed i rebuilt the paramids or some shit i drilled a hole which from what i last remeber drilling holes was humanly possible.

[Skink]

your technique leaves me believing that there is a slim chance it worked,especially the first try...

[MacWQ33]

I doubt he's trying to "fool anyone". LOL! You guys are immature..grow up.

[Captin]

lol this needs a button to turn sarcasm on and off, kind of like turning on bold letters :thumbsup:

[Skink]

I doubt he's trying to "fool anyone". LOL! You guys are immature..grow up.

I am immature,,, but his proof is not really proof... I cud care less if he did or did not,but if he is going as far as proof,it had better be good...

[invision]

i provided plenty of proof you are just a dick

[graph]

I'm not calling you a liar because I don't know for sure, but the fact is,

My first bong looked exactly like that. To the tee. When you removed the downstem, it had that same crude little hole in it. I think mine was a cheaper version of the spring glass bong collection, which have bongs that look almost identical to that one, and I remember another member, I believe it was oneironaut, had a bong that looked similar to yours is well. These were all store-bought. Again, I'm not calling you a liar because I personally don't know, but the facts that I know for certain are true lean against you a little.

Then again, I'll go out on a limb and believe you because I have nothing to lose if I don't. It's just easier this way, and in the end, what the hell does it matter anyways? Maybe you discovered the secret behind some bong-makers, they just buy them as vases first.

[BizzleLuvin]

hey i believe him! nice job!

[Skink]

Yeah I'm being a Dick...

[Skink]

Alright he has a little more credibility with me,but still not a smoking gun...

Note the angle of the stem and the scratchs... the angle on the blue one is close to 90° which shows an amateur was involved in the making,the scratches could be intentional and merely for show...

[TheGreenFog]

I wouldn't go and spend money buying 3 other bongs just to prove that I made one. I believe Invision. I'm going to look for one and make one too. And when I do, I will give arial shots, in the process shots, the remains from the glass drilling (glass bits), etc. LOL. ;)

And I would imagine it would be extremely difficult to drill anything other than a 90 degree angle into a glass sphere. :o

Good job. Go make those others into bongs too and sell them to your friends...OR sell them to friends of friends for more! :thumbsup:

:rasta: RastafarI

TGF

Edit: From going back and looking at the 2 pics Skink posted, I guess if you drill a little higher on the sphere...you would be able to get a better angle into the water well. :twocents:

[The Reffer]

that looks fuckin sick

[Skink]

I wouldn't go and spend money buying 3 other bongs just to prove that I made one. I believe Invision. I'm going to look for one and make one too. And when I do, I will give arial shots, in the process shots, the remains from the glass drilling (glass bits), etc. LOL. ;)


Cud be friends bongs or he might know a dude that works in a head shop or he might work in a head shop..

Were is the beef!!!

[MacWQ33]

Jealousy fills the air.....enough said.

[D.Boone]

they sell vases just like that one at wall-mart and target

[Skink]

they sell vases just like that one at wall-mart and target

I go to Wal * Mart all the time Looking for something unique,never found it though...

[4gan2ja0]

thats a nice bong man, the flower ones gonna look sick, seeing the smoke throught the flowers and all. i believe you, and nice find :thumbsup:

[tribute to me]

i believe you man, it looks crazy nice!

[D.Boone]

I go to Wal * Mart all the time Looking for something unique,never found it though...

not all wall marts got the same shit all the time. but ive seen vases alot like those ones at wall-mart b4

[Skink]

not all wall marts got the same shit all the time. but ive seen vases alot like those ones at wall-mart b4

that is true I got like 3 Wal * Marts I go to and selection is dif at each one...

[invision]

well thanks to those who believe me, it was pretty dumb but whatever right?

im going to have to be real careful with the flower vase its not as thick as the blue and white ones, finding a matching bowl is going to be really hard but she insist it must match if it dont crack first.

[Satan666]

Nice job. Its like a $100 bong tops.

[PrisonerInGlass]

well here you go i picked up 2 more and a flower style one for my GF, you know its pretty damn sad i was called out for no reason it shows how shitty this community really is have fun and ill make sure i dont post anything further i make..............

How tall is the tallest one from this post?

[hemp69]

okay for real you all need to grow up. those are vases and you know it but you have nothing else better to do but argue. he even bought a few more to prove it to you.but whatever i belive you all the way.i even made a bong from a vase layin around. so either take his info and use it or no belive it and be a dick. nice ass bong btw! does it rip? :smokin:

[stinkyattic]

Pier One Imports has the best selection of crazy bongable vases.
Check them out. The sales are sick there too... you can get a nice classy hand-blown vase sometimes for like $7 US.

[nikweiser]

Lol you don't have to try and prove to us that you made it, because you didn't.
I've seen that spiral-design on so many glass bongs just like that. Drop the charade.
Some vase, eh? ~

ya thats a recycled glass bong, my headshop has a grip of them... actually there is one with that same design

[Skeevy Stoner]

Who would pay $150 for that piece of rubish
this was only 60 euro

[TurnyBright]

i think the glassblower was making a bong, then forgot to put a hole in it, so he sold it as a vase.

[2600HERTZ]

Looks like many bongs I have seen in a head shop.

[dankman]

my bong looks almost identical its green and has yellow spots and the rings are white but it has frogs on it if you made thats awesome but if you didnt then oh weel its still a decent bong

[N3D FLANDERS]

cost of vase- $4.87

downstem/bowl- $15.00

Having a bunch of people question your credibility over a bong? Priceless

Roflcopter

[LittLeWinG]

Thats coooooool.

[invision]

no one still believes me................jokes on them.