Grow Log: Skunkxhaze-clones, pakistani hashplant-seed, + pics of mother plant(skunkxh

[Specialist]

Hi everyone, I'm growing 1 paki hplant, 1 female skunkxhaze from the seed (it was the mother plant), and I just took 4 clones of the SkunkxHaze. Oh and I have a really small (but old) already rooted clone from the mother SkunkxHaze.

I'm gonna try to keep you guys updated with dates and nutrient/water amounts. If I fall behind on schedual it's cause I'm busy with work, my goal is a full report on the plants every 4-7 days or whenever I encounter a problem.

All the clones are in a 7" Altitude Propagation dome with a black tray, the clones are in 1.5" grodan rockwool cubes. I used rootech cloning gel on all the clones, the guys at the hydro store said it had the highest amount of hormone and b vitamins in it. I mist all the clones with jumpstart foliar cutting accelerator once daily.

The paki hplant was from a seed I got from my friend (from a paki hplant hermie). it's in a 6"x6" rockwool cube with coco grow in the hole. It is currently 2 weeks old.

[Specialist]

[attachment=o86874][attachment=o86875]
[attachment=o86876][attachment=o86877]
[attachment=o86878]

Please excuse my mediocre photography.
I just put a heating pad under the tray.
questions and advice welcome.
Oh yeah, I use the basic 3 part program from advanced with occational suppliments and I use bigbud from advanced nutrients on the mother.

[Specialist]

The bigger clones are 6"ish and the tiny one is like 3"ish (it's already rooted).
How long should the clones' leaves be limp for before I should worry.
[attachment=o86879][attachment=o86880][attachment=o86881][attachment=o86882]

[Specialist]

[attachment=o87144][attachment=o87145][attachment=o87146]
[attachment=o87147][attachment=o87148]

The brown stuff in my hand is cocogro. And the Plant looks a little thin around the middle because I just took 4 cuttings.
Comments?

[Specialist]

The mother plant hasn't made a visable calyx(s) yet and its over 10 weeks old. Is something wrong, I can see the stipules, look at the pics, there are little nubs on above the main banches coming off of the stem, those are the spots where I tooks cuttings. It looks like a hair is coming out of the stipule.

[attachment=o87149]

[attachment=o87150]

[attachment=o87151]

[postmandave]

nice looking grow specialist. should be an intresting grow.thanks for thanks for the journal.be safe the postman

[Specialist]

Pardon my corny humor. The mother plant is about 4 feet tall now, but has shown no signs of calyx development, I have already taken all the cuttings I need, should I force flower the plant or should I wait till it shows signs of preflowers?

I know there is a possibility of hermaphrodism but I wouldn't be pissed if I got seeds, but I'ld perfer bud.

See pictues above of "Mama"

[crazywill]

flower now if its 4' tall .the plant will double in size.

[Specialist]

I think I'll wait a week whether preflowers show up or not, thanks man, you better be sure.

[Specialist]

Overview. I haven't flowered the mother skunkhaze yet cause I don't have a time yet but I will soon, it's only getting bigger, The clones all have roots coming out of the 1.5" cubes, I put one in a 6" rockwool cube but the other 3 have to wait a day cause I don't have any more cubes. The pakihplant is growing faster than I expected and I'm definately gonna clone it, the roots are growing out the bottom of the 6" cube, should I leave in the cube for the entire grow? oh and for the old clone (the tiny one) I will use that to get seeds for the future. I made up my mind for the clones, I will grow them scrog style. The hplant and skunkhaze mom- tradtional style.

How many times should I top the hplant, I did it once already and it grew in fast as hell.

[Specialist]

[attachment=o89151][attachment=o89152][attachment=o89153][attachment=o89154][attachment=o89155]

[Specialist]

[attachment=o89156][attachment=o89157][attachment=o89158][attachment=o89159][attachment=o89160]

[Specialist]

I bought a new light, a 400 watt econogro switchable balast, econowing reflector, and the best bulb around- the Grolux tubular enhanced hps, obviously 400 watt. I will flower soon I just need to get a 15 amp timer. I expect to flower within 3 days. The new leaves on the skunkxhaze mother are light green and wrinkley, my guess is light stress from the cfls I used temporarily or overdose of phospherous.
Pics:[attachment=o90655][attachment=o90656][attachment=o90657][attachment=o90658]

[Specialist]

These are all pics of the Hplant in a 6" cube. I've topped it twice in total so it should gorw 4 colas, thats all I'm gonna top it.
[attachment=o90659][attachment=o90662][attachment=o90663][attachment=o90667]

[Specialist]

The largest one is the oldest one (the one that was smaller than the others).
The others are rooted but aren't growing super fast yet, the tips of their stems are still reddish. I noticed when the entire stem of the small one turned from red to all green it grew ridiculously fast.
I would appreciate any suggestions/comments. Peace.
[attachment=o90672][attachment=o90673][attachment=o90674][attachment=o90675][attachment=o90676]

[Bodom Children Of]

Looking Nice:thumbsup:

How many days did those clones take to root....I'm gunna clone with roottech but i might use peat pellets....can you transplant those rockwool cubes directly into soil?:stoned:

How much was the switchable ballast?:pimp:

Hashplant is one I want to eventually grow...your plants gunna be the bomb:stoned:

[Specialist]

The clones took 1 week to root. But I invested in them with- rootech, jumpstart cutting accelerator (advanced nurients), a humidome, and a heating pad from wall greens, and 6500k flourenscent light (mogul base). Remember, sativa dominant strains are more responisive to humidity and root faster.

If you want super fast results for your clones use jumpstart, its a low output foliar feed, moisture sealant, it has some type of rooting hormone, and a bunch of supplimental vitamins. if you use it I don't even think you need a humidome because it's a moisture sealant.

Yes you can transplant the rockwool cubes straight into soil. But I would advise you wait till you see roots so you can keep the medium sterile.

The ballast was only 145. The nonswitchable hps one is 130, I dont get why everyone doesn't buy a switchable ballast and save money in the long run.

Hplant is not a largely marketed strain because it seems to kill itself. What happens is that the plants side colas are almost as big as it's main cola and when the resin glands burst the dripping weighs the lower branches down and can break them or the stem. When you do grow it make sure to use steaks when you flower it. Ok, I guess I'm done chewing your ear off. lol.
Take her easy man.

[BlueBear]

Nice informed grow. I herd that Hays is a little tricky to grow, has it given you any problems?
Adieu

[Specialist]

Haze is funky cause the leaves grow in wierd patterns. Right now they went from 7's to 3's and it's stopped growing upwards. Also, the newer leaves are light green and wrinkled, I don't know exactly what this is from. Look at my previous posts for pics of it.
Peace.

[BlueBear]

They say that they respond a little different to normal nute feedings, maybe this is it.
Adieu

[Specialist]

I started 12-12 on Oct.1 so I can keep track of the dates with ease.

I'll post pics when something happens, so far nothing looks different.

Peace

[Specialist]

My "partner" sold me out so I had to clear out before the cops came. The place was filled with the smell when they arrived but the only thing there was the light and some orchids. I had a hell of a time cleaning that shit up, they said they'ld keep their eye on me, I'm scared and sad. Had to send the plants through the garbage disposal. Bummer

[mistyganjatree]

partners,,,,those people we trust most!
hell he's really fucked you up now hasnt he,
find a new friend, use your equipment, their house and go fifty fifty on everything else, at least they aint gonna rat you out eh!
and ya dont have to worry bout the cops comin round to your hse to check!
good luck with the mo fo's

cya

[Daddynobucks]

My "partner" sold me out so I had to clear out before the cops came. The place was filled with the smell when they arrived but the only thing there was the light and some orchids. I had a hell of a time cleaning that shit up, they said they'ld keep their eye on me, I'm scared and sad. Had to send the plants through the garbage disposal. Bummer

KILL THE BASTURD AND MOVE

[Dreamquest16]

I have some super skunk that has leaf curl ,I have been trying to find out why and will try here but the leafs started to curl at the top of the plant and unfortunatly it the plant fell over breaking the stem so i cloned the entire plant and now have 9 clones all with the leafs curling now they were fine until they started shooting the new single and double leaf set which i have never seen a plant do except as a baby
I grow them in potting soil and they get tap water that is allowed to come to room temp and plant food is miracle grow and epsoms salt for micro nutes, and i have the lights ( hps &mh )at least a foot away ,I have do not think it is overwatering as started before i watered and soil wasnt completely dry and 2 other plants show no sign of leaf curling,the seeds i ordered fron NIRVANA and have had a horrible germination rate 1-8 and luckly its female but as you can see the growth i was also wondering what would cause the plant to start the leaf sets over like that,als included is pic of plant without the curl but not the same strain