Awesome one-hitter I made in 5 minutes, STONED on very little.

[Jesse DeForest]

I really hope this makes sense; I'm really, really high.

I found a metal pen, and took it apart. From now on, when I say "Cone," it means the piece that you write with. I took one of the ties you use to close trashbags and bread bags, and burnt off the paper to leave only wire. I rolled the wire into a ball and jammed it into the cone. Great screen.

Then, I took the cone and put it, backwards, into the pen tubing. Slam the side with the cone in it onto a table or hard surface. You can toke up now - just get a tiny bit of shredded up weed and pack the cone as tight as you can. Hold the lighter and smoke.

Another thing you can do is make it into a stash-hitter. Take a bunch of ground up weed on place it into the pen tubing from the mouthpiece. Don't pack it too tight, because then it may be too hard to draw hair. Now, make another screen out of a trash-tie. Place it into the tubing from the mouthpiece, and make sure it's wedged in there. This will keep from inhaling your stash. Aaaaannnd, you're ready to toke. And let me tell you, that's the best part.

A broke off a tiny piece of shake - less than I'd usually use to load a small bowl. I smoke that tiny bit, loading it into the cone three times. Now, I'm higher than I usually get off of my excellent joints. It saves SO much weed.

Plus, it looks nice - not ghetto at all. Unless your pen says something like "BALLPOINT," it looks like something you bought from a shop. I wish I could post a pic, they look really nice.

If someone decides to try this, let me know and try to take some pictures.

This is my first time here.

[GanjaBob]

omg dude i love you i have been trying to find somthing to use as a screen for this one hitter im making for a ski trip tommoro , im gonna try this bread thing

[justinsane]

i think what youve invented there good sir is a ... pipe..

somewhat different from a joint.. haha

[Faultydesign]

lol god damnit, why didn't I think to use a twist tie, I just spent like a half hour making one out of tinfoil.

[Green Screen]

Thats pretty fuckin cool!

[Jesse DeForest]

i think what youve invented there good sir is a ... pipe..

somewhat different from a joint.. haha

I never said it was a joint. I compared the high to that a joint, but that was just to show how good it was at saving weed.

[TheAtomicPunk]

Excellent idea man! Big props. I never thought of using a metal tie thingy whatever they're called...

[P.E.N.G.U.I.N.]

The screen for my bowl is a piece of copper wire, one of the ones with the 50 or so extremely thin strands, wadded up into a ball and plugged in the elbow of a L shaped small brass pipe.

[TheAtomicPunk]

Brass pipe? Copper Bowl? That's very very dangerous. I've sodded before, and heat meeting brass pipes, produces a very toxic dangerous thick black smoke. Be carefull man.

[Jesse DeForest]

Any way of identifying what type of metal the pen I used is made out of?

[Scooby13]

3444444444444444444444444444444444444444

[P.E.N.G.U.I.N.]

Easy. You don't keep the flame on the shit for very long. Brass is fine, but copper and aluminum/tin release fumes if they get hot enough. If you just cherry the bowl ASAP and then get the flame off, you'll be fine. I think it was STDzRUs that really got pissed over it and set us all straight.

[ibreakthings]

dude thats a good idea for a screen....ill try it

[pixel]

wow, are you fucking MacGuyver or something? lol happy tokin :rasta:

[TheAtomicPunk]

Easy. You don't keep the flame on the shit for very long. Brass is fine, but copper and aluminum/tin release fumes if they get hot enough. If you just cherry the bowl ASAP and then get the flame off, you'll be fine. I think it was STDzRUs that really got pissed over it and set us all straight.


OoOo. Actually, I think I remember that...That was quite a while ago. You have a good memory :thumbsup:

[jailer3000]

i have a one hitter i built. it is a lil piece of metal tubin w/ an aluminum cone stuck in the end. the cone is wrapped tightly enough that only smoke can get thru, not the ash. i will post a pic of it when i get home.

[Th3 Chr0nic]

interesting idea, i made a one hitter out of a arrow ...like the kind u use with a bow and arrow. the aluminum ones that u can screw a tip onto at the end. i just broke that end off with the screw home ....make it like 4-6 inches long and the place where the arrow tip would screw in is perfect for packing a small amount of bud into...works best if u just break a peice of a nug... but no screen tho. sometimes suck thru the ashes but burning such a small amount of it doesnt make much ashes

[opiuser]

I took one of the ties you use to close trashbags and bread bags, and burnt off the paper to leave only wire. I rolled the wire into a ball and jammed it into the cone. Great screen.


i used to do that all the time

they make good bong screens. they hold the bud in when its fresh, but you can still suck the ashes thru when your done

in a bad jam, you can also use them for part of a pickup on a guitar... sounds kinda shitty tho

[ninetyfourhours]

pictuuuures

[Vaughn Bardot]

Smoking outta a pen is bad for your lungs. If your in a jam, just use an apple. Or if there's no apple, or fruit, just use a toilet paper roll. *Shrug* I try an bring a little hideable piece with me everywhere. JIC.

[Jesse DeForest]

they hold the bud in when its fresh, but you can still suck the ashes thru when your done

Hasn't happen to me yet.

[da haze meister]

i didnt exactly make a one hitter, but it is a very small, collapsible pipe that can fit into one of the larger matchboxes. first, i cut about 3 inches off the top of a broom handle. then, i drilled aabout 2.75 inches into it, and then a hole to meet it perpendicularly. this is the main body of the pipe. about the size of a prescription pill bottle. then i took a 6mm bb gun barrel and mated that to a .5 inch socket. in between, i put a metal screen from a window screen patch up kit. when taken apart, can fit in a large matchbox. it is a hard hitter, cause its wood, but its served me well.

[DiLoS]

Easy. You don't keep the flame on the shit for very long. Brass is fine, but copper and aluminum/tin release fumes if they get hot enough. If you just cherry the bowl ASAP and then get the flame off, you'll be fine. I think it was STDzRUs that really got pissed over it and set us all straight.

Lol...yeah I remember that thread. I remember coming and just laying all that shit out. Ha, and those anti-drug activists say that dope kills your memory....

[P.E.N.G.U.I.N.]

Hasn't fucked my memory, my friends :thumbsup:

[Pungi420]

HEY i made one of these..it works preety good actually...make sure the pen is metal...and like it has to be a click pen or something that has a cone where the pen comes in and out ....would post a pic...dont know how to tho

[sagarmatha420]

this is what i do..i take a business card cut it into half and roll it into a pipe together with the almunium foil.dat way the paper does not burn..and i roll a filter like screen and shove it from the bottom..and stick the pipe with anything from a rubber band, tape or a ring..it will take u only a minute to do this and it saves herb too..By the way i learnt this trick in nepal...out there they use the foil from the ciggrate pack..
peace

[CannabisGeorge]

Can someone post a pic of the pen one hitter. I really am not getting any idea of how its suppose to look like.

[Pungi420]

dude basically in simple terms ( im not high yet so lemme tell u ) unscrew the tip turn the sharp end around facing back towards the pen ( where u unscrewed it from) make sure it sticks in...and its done....

[Jesse DeForest]

Illustration: http://boards.cannabis.com/attachment.php?attachmentid=45273

[Satan666]

Your TOO proud of your creation