vaporizer

[fatweedsack]

hey i saw this somehwere and i tried it and it worked and ill just tell you it myself. First you have to get a clear light bulb. i used a 40-watt. all of the junk inside of the bulb you have to take out so that the only thing you have is the glass bulb and the ridges on top of the bulb. It pretty hard getting everything at the top of the bulb out. i used pliers to rip off the little metal thing in the center of all the black. Then i used a skinny screwdriver and to break the black material up(whatever it was) it seemed like glass,then i broke all of the glass on the inside and got all of the excess junk out. Then all you have to do is take a 2 liter bottle cap and burn a hole in it(i used a sauturing gun) and put a straw in it. Then all you have to do is put the herb in the bulb and hold it over an open flame. This is good cuz u can just use candles, especially if you dont have a lighter. after a little while you will begin to see the smoke and then just let it build. eventually just take the hit. hits real nice and gets you really high. but its not a normal high though. its a vaporizer high.
alright there you go go try it out and let me know what you think or if you have any other similar ideas.

[dopefiend]

ive been doin that for a while now, it is a different high, i would recommend using at least a 100 watt bulb or it could break

[fatweedsack]

really? i dont see why it would break. ive got a carb on the side so im not gonna let it fill out with hot air cuz hot air=pressure

[50BagOfGreens]

100 can stand higher amount of heat probably, but anway thats an idea that been going around for some time now but i never really have seen that detailed of drescription of how its made. i think ill try to make one right now