AeroCloner Tutorial

[Zion High]

Hey everyone,

I was wondering if anyone had a link to a "How to" tutorial on how to create an aerocloner like the one in Zandors cloning 101 Thread ...

I understand what is needed however I dont get how to create the sprinkler system...

I'm sure for the top its just expanding foam and drill some holes right?

Thanks for anything
~Zion

[Zandor]

For the plugs you can get them on eBay for cheap. They are waterproof expanded rubber plugs. The rest is PVC with misters and a 526-gph pump. Some water proof rubber to seal the lid. That's about it.

It's so easy even a cave man can do it!

[Zion High]

LOL ... well ... I wouldn't call myself a cave man however most times when It comes to stuff I have no clue on I need the type of instruction a 3 year old would...

This is what im GUESSING so far...Based on the picture of the pump system in your cloning 101 tutorial.

The red sprinkler heads are the misters... The water is taken from the bottom of the tote box via the pump and recirculated into sometype of plastic piping and the water preasure from the pump forces the nute water through the inner piping (encased by PVC) then out through the misters which are held in place by holes in the PVC?

[Zandor]

LOL ... well ... I wouldn't call myself a cave man however most times when It comes to stuff I have no clue on I need the type of instruction a 3 year old would...

This is what im GUESSING so far...Based on the picture of the pump system in your cloning 101 tutorial.

The red sprinkler heads are the misters... The water is taken from the bottom of the tote box via the pump and recirculated into sometype of plastic piping and the water preasure from the pump forces the nute water through the inner piping (encased by PVC) then out through the misters which are held in place by holes in the PVC?
That sounds about right. I don't gule my PVC either btw.

[Zion High]

coooooool...

many thanks all mighty zandor...

~Zion

[Zion High]

One more quick question...Are all the misters connected to each other or are they Individually connected to the pump via their own independent piping?? = and if thats the case is there sometype of adapter with a bunch of nipples on it or something?

I'm thinking that if each mister is just connected to each other wouldn't that cut back on water pressure the farther away the mister is from the pump?

[Zandor]

The PVC pipe can handel the pressure with no problem. You just drill & tap the threads and screw in the misters tight with a very small O-ring to seal them and keep them from leaking.