PDA

View Full Version : Need Help With A Closet Grow Problem



Zero Revolt
06-04-2005, 05:44 AM
Just wondering if you all could help me with an issue I'm having with my grow space. It's a closet 3 feet wide by 8 feet tall and 1 1/2 feet deep. The tempature is going over the optimal range inside of it and I need to figure out a way to get a intake and outtake system in there prefferably without chopping up the closet door. Any help would be nice. Thank you. :confused:

Zero Revolt
06-04-2005, 05:51 AM
May I add that I was planning to use a bathroom exhaust fan but that would require me to cut a hole for the outtake vent would it not. And for the intake I have no fucking clue. I've grown plenty times before but never on such a small scale.

RidingHigh
06-04-2005, 05:57 AM
prolly get more responces in the growing forums bro. gl with ur growing=)

luckydan
06-04-2005, 06:29 AM
man i had the same prob with mine have gone to a smaller scale in a closet with sliding doors.It is devided in the midle,i managed to get some ducting squeesed between the door to the other end and out have to leave the end door open slightly,put a small fan in the ducting.i have a fan ducting i8n and out but as long as u can get one out this should help.Remember high temps r ok if u have the humidity to go with it.mine wre geting upto 39c but managed to get the top temp down to around28c.Anyway hope i have helped a bit happy growing.....

RidingHigh
06-04-2005, 06:54 AM
im finally not being a total Puss and Planting some Plants tomorrow Just some crap shwag seeds see how it plays it=P

HighTimeStoner
06-05-2005, 10:00 PM
Small Fire-Safe Fan and a big bowl or bucket of water will help...
You dont really need a intake/outtake as long as you keep at a close temp.
Most people with outtakes have alot and its to get rid of the smell.
While you're in lights on mode you can also leave the door open a little to let out some <bad air> and let in some fresh.

GTC21
06-05-2005, 10:21 PM
For my outtake I have a bathroom extractor fan which removes the air from my cupboard through ducting to outside. I drilled the hole in my wall with a core drill bit.