Adjust-A-Wing Medium / Need Dimensions

[bigsby]

I'm reposting this up a level in the hope it will get more views and an answer. Please respond to the thread under the Indoor Lighting thread here. (http://boards.cannabis.com/indoor-lighting/199844-adjust-wing-medium-need-dimensions.html)

I am looking for the depth dimensions of the medium (or large as it would give me an idea) adjust-a-wing. (http://www.adjustawings.com) Every site I've found only lists the length and width as 22" x 24" - 27" but no information on the vertical depth (that is the space it takes north to south). I need to know the vertical depth when set to 22" x 24" which would be the greatest depth. I have a supplier that insists that it's 22" but there is no way that is right, is it? Any help greatly appreciated.

Also, your thoughts on this reflector if you have time for that too.

Thanks!!

[bigsby]

No body has one of these? I'm ready to get one just so I can post up the dimensions... any help appreciated.

[CanGroIt]

No body has one of these? I'm ready to get one just so I can post up the dimensions... any help appreciated.

Was going to throw in my :twocents: earlier but....

I checked out the pics on the medium one and by judging the base of the mogul, I'd say the lamp is anywhere from 12-16 inches in height.... But I'm just guessing....

CGI::::::

[bigsby]

If you look at the videos they demonstrate with the large model. It doesn't look larger than 12" at the deepest setting. so I'm guessing that the medium isn't more than 10" at the maximum setting. I have an inquiry in with the maker. I'll let you know if I hear back. Thanks of the input. Anyone have one of these?

[GaGrown]

Have you seen this?

Ga.

Sunlight Supply Presents: Adjust-A-Wings - How to create "seasonal" settings for optimal performance - YouTube (http://www.youtube.com/watch?v=WuRYMOetZPQ&feature=related)

[bigsby]

Yeah that is where I was looking to try go gauge the depth of the wing at its deepest setting. That's the large wing and at it's deepest it doesn't look much more than 1 foot, if that. So the medium can't be much more than 10" right? The sales people are telling me it's 22" but there is no way that can be right... right? Note they don't have one constructed to measure from. Seems I may have to post up on ICMag or one of the others. No one here uses one of these?

[GaGrown]

Yeah that is where I was looking to try go gauge the depth of the wing at its deepest setting. That's the large wing and at it's deepest it doesn't look much more than 1 foot, if that. So the medium can't be much more than 10" right? The sales people are telling me it's 22" but there is no way that can be right... right? Note they don't have one constructed to measure from. Seems I may have to post up on ICMag or one of the others. No one here uses one of these?

At 22 inches.. It would be damn near folded in half.. That's impossible.I'm gauging from the top of the fixture to the wire. That can't be but about 8-10 inches 12 max. I saw the same thang! Tryin' to help ya.. When ya wanna know,ya wanna know! Right?

Ga.

[bigsby]

Hey the admins toasted my last post to this thread? Why? Give me a heads up or something so I don't do it again.

All I said was, GA - I always appreciate your input. Plus some bits and pieces about adding a ceramic metal halide to me setup. WTF?

[GaGrown]

Hey the admins toasted my last post to this thread? Why? Give me a heads up or something so I don't do it again.

All I said was, GA - I always appreciate your input. Plus some bits and pieces about adding a ceramic metal halide to me setup. WTF?

If I had to guess? I would say it was that you mentioned another forum. In the other post. I was warned and infracted about a link to a site. I think the forums on the net should be as a family! That'll never happen!!

Ga.

[bigsby]

Really? Are they that insecure? I can't mention another forum where information is shared and where people exercise their right to free speech? Was that really where I went south canncom? If so then all I can say is get a grip. That and have the balls to tell a user where they went south of your "rules". Users are your life blood. Hell, you own cannabis.com for god sake. People will migrate here regardless. What are you afraid of? Perhaps that accounts for all of bans on old timers who have added tons to your knowledge base, not to mention those that have walked away on their own never to be seen again - stinkyattic, opie, etc. I wonder if that's my destiny? I hope you are secure enough to leave this post intact. Otherwise I'll exercise my right to walk too.

[Its a Plant]

Hey the admins toasted my last post to this thread? Why? Give me a heads up or something so I don't do it again.

All I said was, GA - I always appreciate your input. Plus some bits and pieces about adding a ceramic metal halide to me setup. WTF?

No one deleted anything, sorry.

[bigsby]

oh... really? hmm... guess the system swallowed my post? I did see it post up. If that's the case I owe an apology. My parents taught me that humility is an asset, knowing when you are wrong and all that. Sorry for going off half cock. It was a bourbon night is all I can say in my defense. uh... feel free to delete the offensive post.

OK so who out there has these dimensions I'm looking for?!

[bigsby]

OK here is what I got back from the manufacturer. Hopefully it will help someone else.

Thank you for your inquiry & thank you for your interest in our Adjust -A- Wings & Super spreader products.


The Maximum height of the medium wing (at its most narrow setting) is just under 7.5 inches (including the height of the hanging hooks !!


The Minimum height (when wing is set at its widest) is approx. 4.5 inches.. (aint noone lower than us ?)