View Full Version : Preparation For Morning Glorys
ChronicKing420
03-27-2005, 07:32 PM
This thread is intented to help out people who want to trip off morning glorys and want to know the steps to get there seeds ready that were bought from wal mart or w/e. If any one has questions or knows a lot on them please post.
Type of morning glorys used for a trip : Heavenly Blue found to have the most concentration of LSA in them.
Steps on getting them ready: 1. Wash seeds in detergent with DISTILLED WATER. Note: DO NOT USE TAP WATER IS DESTROYS THE LSA.
2. Wash them under a bottle water and get the soap off them.
3. Dry them ( not really sure on this step someone post if they know what to do from here)
4. Grind them up
5. Extract in alcohol ( IF u want to Step not needed) OR just add them to a food and eat them
Please post if something is not correct or if you have any way of makin a tea out of them ect. Then take them and trip your balls OFF :eek: :eek:
LearyS Disciple
03-27-2005, 07:34 PM
that method does work good but does anyone here know how much alcohol to use? also, theres more scientific methods to do this and most of them require petroleum ether. how do u get ahol of that or where can u buy naptha?
Delta9
03-27-2005, 07:52 PM
Naptha is a petroluem distillate. Its a solvent used for paints and auto-parts and shit.
It is de-naturated though. So its going to leave impurites behind on the seed meal unless you repurify it.
Delta9
03-29-2005, 01:07 AM
Now that you have completed your still and have sucessfully distilled water, camp fuel and paint thinner(the paint thinner is to inhale). yOU ARE READY TO START YOUR LONG JOURNEY TOWARD LSD PRODUCTION. Dissolve 10g of sugar in 40 mL of pure water in a small glass flask/bottle. Add 2g of yeast (if available add a crystal of potassium nitrate and one of ammonium phosphate). Leave at 30C (on a radiator) for 3 days.
Distill the supernatant liquid. Carefully heat until 10mL has been collected. Distill the collected distillate once more by simple distillation and fractional distill the second collected distillate once again with you still equipted with a fractionation column. The yield should be small (about 2 mL).
Repeat this process for a long time until you have collected a decent quantity.
Delta9
03-29-2005, 01:24 AM
Diethyl ether.
Take car battery and drain out concentrated sulfuric acid into galss bottle(note: the acid will have traces of lead a deadly poison).Add to your stillpot 5mL of ethanol and 5 mL of the concentrated H2SO4 acid(note the acid will dissolve metals such as copper a glass still pot will be necessary). Warm mixture until distillation takes place. slow add another 5 mL of ethanol at the same rate as the diethyl ether drips out of the condenser. Make sure you have your collection flask in a really cold ice bath and that there are no flames near the work area. Contnue heating until no more ether distills over. Wash the distillate with a baking soda solution in a homemade separatory funnel and then with water. Allow to stand in refrigerator with a few grains of ground calcium chloride (road salt) to dry. Redistill with ice bath and collect the fraction between 33 - 36C. continue process for long time to collect a decent quantity of diethyl ether.
Note diethyl ether was once used as a local anestetic, to test to see if your ether is high quality, sit down in flame free environment and inhale a ether soaked rag to see if you slip into unconciousness. Will not cause brain damage, but is still potentially dangerous.
Delta9
03-29-2005, 01:44 AM
Now that you have ether you are ready to freebase your cocaine into crack. Take your coke and dissolve in water. Add ammonia to excess until coke precipitates out. extract three time with diethyl ether and combine ethereal extracts. distill off ether and scrape crack out of pot and smoke.
I neither make LSD or crack. I am mearly educating the public about illegal drug labs.
Delta9
03-29-2005, 01:48 AM
Take 90% ethanol and soak your good weed in it. take soaked alcohol and put into bottle. Dilute small amounts with appropriate flavorings and drink.
LearyS Disciple
03-29-2005, 01:52 AM
that first one is supposed to make LSD? because that really doesnt look like any acid recipes ive seen. id probably recommend to not try that unless u can back it up with a site or something, cuz it doesnt look that safe lol
Delta9
03-29-2005, 01:55 AM
So beware you never know were a crack lab is located. Keep your head up and tell you local crack dealer to fuck off.
Delta9
03-29-2005, 02:00 AM
It dosent look safe? your right, but where do you think all illegal drugs come from?
the information comes from the books:
Buttle & Daniels "Practical Chemistry, An Integrated Course", second addition,1967, New Your Plenum Press.
Whitten, Davis, Peck. "General Chemistry" 6th edition, 2000.
Think about it.
Someone makes the shit yea It is unsafe but crack and LSD don't come from safe laboratries.
LearyS Disciple
03-29-2005, 02:03 AM
i knowto make drugs there are risks and all but taking battery acid out of a car battery? wheres the ergotamine and all that jazz thats involved with lsd production?
Delta9
03-29-2005, 02:04 AM
Your typical drug lab probably dosent have professional equiptment and doctors synthesizing the drugs.
Delta9
03-29-2005, 02:08 AM
No battery acid is not involved in extracting alkaloids from seeds. A car battery is just a impure source of a chemical reagent necessary to carry out a long sequence of reactions. You would need all kinds of reagents to make LSD. So you would have not only to synthesize the LSD itself but also every other necessary reagent involved in the multistep synthesis.
Delta9
03-29-2005, 02:13 AM
Here are some of the reagents necessary to carry out an LSD synthesis.
SOCl2
ALCl3
Br2
NaOH
H3O+ (and acid, probably strong like sulfuric)
NaCN (cyanide)
Where are you going to get these reagents?
Not only that at each step in the synthesis you will build up more impurites unless you recrystallize at each step.
and at each step you yield will get smaller and smaller.
plus you need proper solvents and vessles to carry out your reactions at each step. Methanol for instance which causes blindness. There tons of unsafe chemicals necessary.
Delta9
03-29-2005, 02:20 AM
So only a master could do it. The purer the reagents, solvents, and starting materials the purer the product.
I'm thinking that most drugs are going to loaded with impurites for that reason. Battery acid, lead and all other kinds of poisons were found during prohibition in illegal hootch smuggled from canada. PCP is usually loaded with impurites. Not only that you got old Russian weapons being sold on the black market to Terrorists. We got all kinds of biochemical agents being developed for weapons. Thats the last thing we need is some rapper babbling about his dick.
Delta9
03-29-2005, 02:39 AM
Chewing Morning glory seeds?
You might as well as chew a cup full of apple seeds. One apple core won't kill you but theres traces of cyanide in apple seeds so a cupfull of apple seeds could potentially be fatal.
You can see that cyanide group on the structure of amygdalin in the picture?
If you could cleave off the sugar part of the molecule add three methoxy groups on the aromatic ring and react it with NH2(CH3)2, CuCl, ethanol and heat you would have an intermediate that could be reacted with NaBH4 and methanol to give mescaline.
Delta9
03-29-2005, 03:30 AM
I think Using a NH2CH2MgCl gringard reagent on 3,4,5-trimethoxybenzaldehyde would work much better theoretically though.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.