Log in

View Full Version : Second attempt at growing some dank



Darkace
04-22-2009, 11:38 AM
well after some low life decided to help themselves to my outdoor grow i have been driven to start a lil cfl grow box for some good old personal use... the plants im growing are from the seeds i made in my outdoor grow.... very nice mummy and good genetics daddy so im hoping for some good lil babbies.... put about 10 or so seeds into germination today... and alreadi have 2 plants from the seeds i planted earlier which seem to be cranking after puttin them in my box...
only got 4 20watt 2700k cfls at the moment going to add another 4 and 2 45watt 5400k for a good 250watts...

well dats all for now

will put some pics up tomorrow of my setup i got going :stoned:

Darkace
04-23-2009, 10:07 PM
today i checkd my beans in germination and 2 have popped so im hoping for 2 more 2 pop and ill be happy... didnt put pics up yet az of camera being flat just put it on the charge nw

Darkace
04-23-2009, 11:35 PM
so heres the pics of my setup its pretty getho but i haven't paided a cent for it so yer..... the real lanky plant stretched heaps wen it was growing by the window when it was young cause the seasion has just finished and its 12/12 time outdoors... but they will be mint after a good transplant after a day or so then once there on there 4th-6th node ill start them on 1/4 strength growzilla

Italiano715
04-24-2009, 02:08 AM
They are starting too look good....Seems you could move the lights a bit closer to reduce stretching so bad....Or maybe you should LST them considering the lights you have look like flowering spectrum bulbs which tend to stretch plants as the "blue" colored ones promote more bushy plants! :thumbsup:

Darkace
04-24-2009, 02:39 AM
yea i did move them abit closer.... the one that stretched heaps was wen it was growing by a window and when i put them into that box they just started to take off.... and ill will be gettin 2 45 6400k and another 4 more 20wattser

Darkace
04-24-2009, 02:44 AM
question: when i repot the stretched one can i put it abit more lower in the dirt so its not so retardedly tall????

Italiano715
04-24-2009, 04:31 AM
question: when i repot the stretched one can i put it abit more lower in the dirt so its not so retardedly tall????

Sure, I would...and leave about 2 inches of the pot not filled with dirt. Run some water through the soil to get it nice and moist then transplant it at the depth you'd like(let the water runoff). Then after I get it the depth I like I put a bit more dirt inside the pot around the plant and water a little bit again. Reason I put a bit more is because when you go to water the new soil it gets saturated so it appears that you lost some dirt (you may a little on runoff) and then the transplant you did you will know it's at where you want it to be without finding out after you transplanted and then watered (vice-versa of what I do) that your plant is not buried deep enough and your having to put more dirt back in the pot:wtf:

But in a nutshell; yes you can bury it a bit deeper, I don't see the harm as long as there is no leaf growth there (don't count the cotelydon(sp?) leaves)

Darkace
04-24-2009, 04:53 AM
swt cant wait till ma seeds in germination get there grow on.... gna be a fun adventure ahead :smokin:

justanotherbozo
04-24-2009, 04:04 PM
high bro, just thought i'd let you know that you should be running mostly
'cool' lights for vegging, that would be 5000Kelvin and up.

if you use only those 2700Kelvin's, you'll get too much stretch.

heres some info for future reference.


Growing Lighting Types and Intensities
Lumen
A unit of measurement of the total flow of light which is emitted continually from a source. One lumen is equal to the flow of light which is emitted from a very small wax candle.
The common 40 Watt incandescent bulb emits some 400 lm (lumen). So the efficiency of that bulb is 400lm/40Watt= 10 lm/watt.
LUX
= lm/m2, the intensity of light which falls on a surface.
Colour Temperature
- measured in degrees Kelvin, the color of a light's output in relationship to the degree of heat applied to produce the specified colour of light. Daylight is measured around 5000 degrees kelvin
If we direct all light from our 40 Watt lamp towards a floor area of 1 square meter the intensity of light on that area will be 400 lux, (400 lumen distributed over 1 square meter, 400/1 lm/m2 = 400 lux,) which is a little better than moonlight, but far away from the sunlight intensities we need for growing plants.
The sun gives some 50 000 lm/m2 = 50 000 lux at the earth surface on a clear summerday. See the table below.
The 40 Watt incandescent lamp is not only too weak for growing plants, it also has too little blue in its spectrum and is far too inefficient. Fluoroscent tubes and HPS and MH lamps are the better choices.
Cannabis needs 24 hours of strong light for the first 4-6 weeks of vegetative growth. Then it needs 2 months of 12/12 hours of strong light and very dark, to flower and ripen. If they get less than 30000 lux they will still grow vegetatively but slower. And they will flower less, if at all.



Light Requirements of "High Energy" Plants
1000 - 5000 lux Min. necessary for life
10000 - 15000 lux Min. necessary for consistent but sparse growth
20000 - 25000 lux Min. necessary for robust growth

25000 - 30000 lux Max. Efficiency for Sub Tropical varieties
25000 - 50000 lux Max. Efficiency for Equatorial varieties
Plants need 25000-50000 lux too grow fast.

90000 lux Max. Sunlight Intensity on Earth's surface This is too much light, it is not good for the plant.
Plants subject to intensities at this level or greater are at risk of "solarization," whereby photosynthesis is retarded. This can happen at noon on a clear Tropical summer day, especially at high altitudes.

140000 lux Sunlight above atmosphere (Solar Constant)

________________________________________
More advanced theory: Scientific, but has many answers about how and why.

Air Temperatures between 23C (70F) and 32C (90F) are ideal for growth; beyond 35C (95F) can adversely affect plants, retarding photosynthesis, and, in extreme cases, can cause leaf burn if a radiant heat source is nearby.

Calculating with lumen, lux and efficiency:
The cheapest and easiest solution to the beginner is to use fluoroscent tubes. The usual ones are 120 cm (48") long, and give at best 4000 lumen.
*****Ed Note: If you care to get a light meter and measure the light from various distances to your flouros, you'll see immediately that you will want to keep the lights as close to the top of your plants as possible. *****
Your grow room must have at least these dimensions: 140 cm high (these plants get big, 180 cm is better, 120 cm long (to accomodate for the tubes), and wide enough, let's say 60cm (2 feet). The easiest is to build an extra wall, made of silver tarpaulin or wood. This wall is placed 60 cm from a real wall, to create a space of say 200*260*60cm for use as a greenhouse or rather two. Build the wall and divide the space up into two small rooms. Make some type of opening, so you can take care of your plants later. Put in ventilation and cover all inside surfaces with al-foil using a stapler. We want the light to bounce around in there until it finds a green leaf to do its work in. As much light as possible is needed for the growth of the plants. The ventilation consists of a 12Volt fan which pushes the warm air from the green house through a plastic tube which ends outside the house to let the warm moist and odors out. Instead of a fake wall you can disguise the green house as a very big bass speaker, stereo wall, tv-stand, cupboard or whatever.
Buy the fluoros in ready-made units or do it yourself like this:
Buy the bare necessities to put up fluoros, that is reactors, lighters, tube holders, lighter holders, wire.7mm, capacitors and connectors.

Most of these devices have pushcontacts, that means you don't have to solder or screw much, just strip off the insulation from the cable and push it in.
Put up as many tubes as possible in the ceiling of the green house. You might be able to get 6 tubes into every green house half. Every green house has a floor area of 0.60m*1.30m=0.78m2 With 6*4000 lumen you get 24000lumen. Divide by 24000lm with 0.78m2 to get 31000 lux, which is good enough.
Use hanging mounts for the tubes, they are cheapest and easiest to use. They also make it easier to pack the tubes densely in the cieling or hanging at different levels, hanging only in the thin electric cables. If you manage to get 10 tubes into the top of the green house you get 40000lm/0.78m2= 51300 lux in there.
As another example, let's take one of the most popular hps grow bulbs:

Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
53,000 430 123.3 2000 16k Philips, SON T AGRO
The Son-T-Agro gives out 53000 lumen. If we use a reflector to direct all of that light towards a floor area of 2 m2 we get a light intensity on that area of 53000 lumen/2 m2, which is 26500 lumen/m2 (=lux)
We can see in table 3 above that it fits in: "25000 - 30000 lux =Max. Efficiency for Sub Tropical varieties".
We add some daylight fluoros, 6 fluoros a 4000 lumen=24000 lumen. Divide by floor area 2 m2 to get =12000lumen/m2=12000lux
Together the hps and the fluoros give 26500+12000=38500lux in the 2 m2 big grow room. see table 3: 25000 - 50000 lux Max. Efficiency for Equatorial varieties.
This combination will draw 430Watt+6*40Watt+100Watt in the ballast units, total =530+240=770Watt of electricity.
Our total efficiency is 53 000 + 24 000 lm divided with 770 Watt, which is 77 000 lumen /770 Watt = 100 lm/Watt
At 38500 lux we have an illumination which is optimal for growth,

Illumination Chart
Light Intensity (lux) as a Function of Area Illuminated (m2)
Light Source lumens 1.0 m2 1.5 m2 2.0 m2 2.5 m2 3.0 m2 3.5 m2 4.0 m2
1000W HPS 140000 -- -- 70000 56000 46700 40000 35000
600W HPS 90000 -- 60000 45000 36000 30000 25700 22500
400W HPS 50000 50000 33300 25000 20000 -- -- --
250W HPS 29000 29000 19300 -- -- -- -- --

1000W MH 115000 -- -- 57500 46000 38300 32900 28800
400W MH 40000 40000 26700 20000 -- -- -- --
For example, from this chart we can see that a 600W HPS used to illuminate an area of 2.5 m2 will result in a lighting intensity of 36000 lux. Note that this presumes that a reflector is being used so that all the light is being directed towards this 2.5 m2 area.

________________________________________

LIGHT BULB PRODUCT LIST
HPS Conversion
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
40,500 360 112.5 1900 24k Philips C150S63/RETROLUX
23,000 215 106.9 1900 24k Philips C215S65/RETROLUX
15,000 150 100 1900 24k Philips C260S64/RETROLUX

High Presssure Sodium (HPS) bulbs
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
140000 1000 140.0 2100 24000 Philips C1000S52 Ceramalux
130000 1000 130.0 2100 24000 Sylvania LU1000 Lumalux
130000 940 138.3 2100 24000 IwasakiEyeSunluxUltraAceMHcnv)
90000 600 150.0 2100 24000 Philips C600S106 Ceramalux
84000 600 140.0 2100 18000 Sylvania LU600 Planta
53000 430 123.3 2100 16000 Philips Son T Agro 430W
51500 430 119.8 2100 18000 Sylvania LU430 Planta
50000 400 125.0 2100 24000 Philips C400S51 Ceramalux
50000 400 125.0 2100 24000 Sylvania LU400 Lumalux
47500 360 131.9 2100 24000 Philips C360S51/EW Ceramalux
45000 360 125.0 2100 24000 IwasakiEyeSunluxUltraAceMHcnv)
29000 250 116.0 2100 24000 Sylvania LU250 Lumalux
28500 250 114.0 2100 24000 Philips C250S50 Ceramalux
27500 225 122.2 2100 24000 Philips C225S50/EW Ceramalux
22000 200 110.0 <2100 24000 Sylvania LU200 Lumalux
16000 150 106.7 <2100 24000 Sylvania LU150 Lumalux
6300 70 90.0 <2100 24000 Sylvania LU70 Lumalux

MasterColor (MH)
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
6200 70 88.6 3000 7500 Philips CDM70/U/M
6200 70 88.6 3000 7500 Philips CDM70/C/U/M
9500 100 95 3000 10k Philips CDM100/V/M
9200 100 92 3000 10k Philips CDM100/C/V/M

Metal Halide (MH) bulbs
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
125000 1000 125.0 4200 12000 Iwasaki MH BSX/BU 1000
115000 1000 115.0 4000 12000 Sylvania MS1000/BU SupMetalarc
115000 1000 115.0 3400 12000 Sylvania MS1000/C/BUSupMetalarc
111000 1000 125.0 3700 10000 Philips MH1000/U/BT37
40000 400 100.0 4300 20000 Philips MS400/HOR
40000 400 100.0 5000 20000 Philips 5K High Output Metal Halide
39000 400 97.5 4200 20000 Sylvania MS400/HOR SupMetalarc
38000 400 95.0 4200 20000 Iwasaki MH 400 Eye Sunlux
38000 400 95.0 3800 20000 SylvaniaMS400/C/HOR SupMetalarc
34500 400 86.3 3200 20000 Sylvania MS400/3K/HOR Super

Metalarc
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
23000 250 92.0 4300 10000 Philips MS250/HOR
23000 250 92.0 4200 10000 Sylvania MS250/HOR SupMetalarc
22000 250 88.0 3800 10000 Sylvania MS250/C/HORSuMetalarc
18000 250 72.0 3200 10000 Sylvania MS250/3K/HOR Super

Metalarc
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
15000 175 85.7 4300 10000 Philips MS175/HOR
15000 175 85.7 4200 7500 Sylvania MS175/HOR SupMetalarc
15000 175 85.7 3800 7500 Sylvania MS175/C/HORSMetalarc
15000 175 74.3 3200 7500 Sylvania MS175/3K/HOR Super

Metalarc
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
9300 100 93.0 4200 7500 Philips 4K Master Color ED-17
8500 100 85.0 3200 10000 Philips MS100/BU/BD/M/3K
7800 100 78.0 4300 10000 Philips MH100/U/ED28/HR
6800 100 68.0 4200 7500 Philips 4K Master Color PAR-38

Flourescent tubes, 48"
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
4400 60 73.3 3000 12000 Sylvania F48T12/D830/HODesigner
4250 60 70.8 4100 12000 Sylvania F48T12/D41/HO Designer
4250 60 70.8 3500 12000 Sylvania F48T12/D35/HO Designer
4250 60 70.8 4100 12000 Philips F48T12/SPEC41/HO
4250 60 70.8 3500 12000 Philips F48T12/SPEC35/HO
4250 60 70.8 3000 12000 Philips F48T12/SPEC30/HO
3700 40 92.5 5000 24000 Philips F40/AX50 Advantage X
3700 40 92.5 4100 24000 Philips F40/AX41 Advantage X
3700 40 92.5 3500 24000 Philips F40/AX35 Advantage X
3700 40 92.5 3000 24000 Philips F40/AX35 Advantage X
3600 40 90.0 5000 24000 Philips F40T12/ADV50/ALTO
3600 40 90.0 4100 24000 Philips F40T12/ADV41/ALTO
3600 40 90.0 3500 24000 Philips F40T12/ADV35/ALTO
3600 40 90.0 3000 24000 Philips F40T12/ADV30/ALTO
3500 40 87.5 4100 20000 GE Staybright
3500 40 87.5 3500 20000 GE Staybright
3500 40 87.5 3000 20000 GE Staybright
3400 60 56.6 6500 12000 Philips F48T12/D/HODaylight
3300 40 82.5 3000 20000 Philips F40T12HomeLightWarm
3300 40 82.5 4100 20000 Sylvania F40/D841 Desi800
3300 40 82.5 3500 20000 Sylvania F40/D835 Desi800
3300 40 82.5 3000 20000 Sylvania F40/D830 Desi800
3300 40 82.5 4100 20000 Philips F40/41U Ultralume
3300 40 82.5 3500 20000 Philips F40/35U Ultralume
3300 40 82.5 3000 20000 Philips F40/30U Ultralume
3280 40 82.0 5000 20000 Philips F40/50U Ultralume
3200 40 80.0 4100 20000 Philips F40T12HomeLightCool
3200 40 80.0 3500 20000 Philips F40T12HomeLightWarm
3000 40 75.0 6500 20000 Sylvania F40/D865 Design800
2325 40 58.1 6500 20000 Philips F40DXDaylightDeluxe
2250 40 56.3 5000 20000 GE F40/SUNSunshineFullSp
1900 40 47.5 3050 20000 GE F40PL/AQ/WS Plant&Aquarium
1875 40 46.9 3400 20000 Sylvania F40GRO/WS Gro-Lux
1600 40 40.0 na 20000 Philips Agro-Lite
800 40 20.0 6750 20000 GE F40PL Gro & Sho

Mercury Vapor bulbs
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
60500 1000 60.5 4300 24000 SylvaniaH36GW-1000/DXBrWhDlx
23000 400 57.5 3500 24000 SylvaniaH33GL-400/N Warmtone
22000 400 55.0 4300 24000 SylvaniaH33GL-400/DX BrWhDlx
13000 250 52.0 3500 24000 SylvaniaH37KC-250/N Warmtone
12500 250 50.0 4300 24000 SylvaniaH37KC-250/DX BrWhDlx
8900 175 50.9 <3500 24000 SylvaniaH39KC-175/N Warmtone
8400 175 48.0 <4300 24000 SylvaniaH39KC-175/DX BrWhDlx
4500 100 45.0 <3500 24000 SylvaniaH38JA-100/N Warmtone
4100 100 41.0 <4300 24000 SylvaniaH38JA-100/DX BrWhDlx

Tungsten Halogen Quartz double end lamps
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
22000 1000 22.0 <3200 2000 Sylvania 1000T3Q/CL
21000 1000 21.0 <3200 3000 Philips 1000T3Q/P/CL cl pl
11000 500 22.0 <3200 2000 Sylvania 500T3Q/CL
10500 500 21.0 <3200 3000 Philips500T3Q/P/CL ClPlusline
10000 350 28.6 3075 2000 GE Q350T3/CL/ULTRA
9200 400 23.0 <3200 2000 Philips 400T3Q/CL Clear
6000 300 20.0 <3200 3000 Philips300T3Q/P/CL ClPlusline

Standard Incandescent Bulbs 110V/230V
Lumen Watt lm/watt Kelvin Hours Manufacturer, Name
400 40 10.0 2000 1000 40 Watt Std. Incandescent Bulb

________________________________________
Equivalences:
1 lm/m2 (lumens per square meter)
= 1 lux (lx)
= 10-4 lm/cm2
= 10-4 phot (ph)
= 0.093 lm/ft2
= 0.093 foot-candles (fc)

1 meter = 3.3 feet
1 square meter = 10.8 square feet
1 foot = 0.3 meter
3 feet = 1 yard = 0.91 meter

tinytoon
04-24-2009, 11:18 PM
Holy Info!!! :jawdropper:

Darkace
04-25-2009, 12:09 AM
fuken hell i think i fuken no wat kinda of lights i have... can u plz read wat esle i have writen before u say ur crap... i said i will be gettin 2 45watt daylight bulbs soon jesus..... that plant had alreadi stretched heaps before i even put it in there... cause i started them outside when it wasnt grow time it which dat 1 stretch...... i no ur just trying to be helpfull and sorry if i offended you....

justanotherbozo
04-25-2009, 02:12 AM
just tryin' to give you a heads up bro, guess you're one of those folks who already
know everything so you don't need the help.

happy growin'

Darkace
04-25-2009, 02:42 AM
yea i no ur tryin to be helpfull and i dnt no everything seeing this is my second grow but dats just such a massive post i wouldnt even waste my reading it.. i know it has heaps of useful info... but yea sorry if i offended u

justanotherbozo
04-25-2009, 02:46 AM
ignorance is it's own reward

Darkace
04-25-2009, 02:52 AM
ok......

tinytoon
04-25-2009, 10:35 AM
well I'll say thnx for info JAB, gave me a shopping list for my next bulbs thats for sure :thumbsup:

justanotherbozo
04-25-2009, 08:08 PM
well I'll say thnx for info JAB, gave me a shopping list for my next bulbs thats for sure :thumbsup:

you're welcome bro, i'm just passin' on what was freely given to me. and when
it was me askin' the questions, i wanted to know the whole answer, that's why
i posted all the data, to help people understand why.

anyway, i'm glad i was able to help someone.

Darkace
04-25-2009, 10:39 PM
welll i checkd my germination today and 1more poped so i put the 3 that areadi poped into some soil and just wait for them 2 sprout up.... i still wondering wat im gna call ma plants... the mother seed i got from a mate that was at the warehouse one day wearing a cia shirt cannabis inhaler association and some rasta dude just gave him some seeds... and the male was from some seeds i got from a mate who got them from his pig hunting mate and they were spoused to be skunk crossed wif ???? so yea dats all i no i there origin.. ill just have to fink of a name when i can smoke some of they product these babbies make..

Darkace
04-25-2009, 10:56 PM
its 4 that poped so i got 4 more on just waitin on them to sprout.... definitely show get at least 1 female out of 6 plants the more the beta... once there big enough 2 clone i will put a clone of each plant in ma mates flowering to determined way sex they are..

Darkace
04-26-2009, 01:40 AM
new pic of de plants

Italiano715
04-27-2009, 01:40 AM
starting to look good:thumbsup:

Maybe when you transplant you should think about LST those suckers...Just tie them down to the side of the pot and as the plant tops grow back up just tie them down and around until you get it in a full circle around the pot then cut off all the small foilage at the bottom of the plant and them give them about a week and then throw them into flower and untie all the branches. Then watch the bud porn evolve right in front of you! :D

Darkace
04-27-2009, 01:45 AM
the ones that are female and goin 2 be mother plants and put in ma m8s veg box so i have clones of dis strain for ma outdoor and indoor....i should be gettin my 2 45watt bulbs to day if all goes to plan..

Darkace
04-27-2009, 06:04 AM
lame the shop only had 1 45watt 6400k but it should give them alil boost i hope.... they beta get some more in soon... will take a pic of box 2moz

Darkace
04-28-2009, 12:44 AM
///

Darkace
04-28-2009, 12:45 AM
i will be transplanting them today... cause they reali need it

Darkace
05-03-2009, 01:51 AM
well they been in there for 2 weeks nw... heres some pics of how there going

Italiano715
05-03-2009, 05:42 AM
they definitely look like they are liking those pots a lot more! Looking good Dark:thumbsup:

Darkace
05-03-2009, 06:00 AM
sure do.... i Fimmed the bigger 1 today for abit of experimentation

Italiano715
05-06-2009, 07:22 PM
How are things looking for you Dark? Did they respond well to the FIM?

Darkace
05-06-2009, 11:17 PM
i auctaly just topped then.... there crancking gave them a feed of 1/4 strength growzilla and alil bit of earth jucie and some spuerthrive yesterday

Darkace
05-07-2009, 10:25 PM
soz the pics abit blurry and cbf takin more

gedogen
05-08-2009, 06:41 AM
ignorance is it's own reward

totally agreed. this guy's going to burn the house down w/ that setup, i see lots of basic no-nos. they will all come back to bite him in the long run, although his plants do look good for now.

VanGogh001
05-09-2009, 03:16 AM
Yea man, you should think about your safety before the plants. Not worth having plants but no home to grow in. The plants seem to be healthy but try to tighten up the grow room IE get the VHS tapes out, replace with buckets or something solid. Lighting will become an issue shortly if thats all you got.

Prepare ahead so these things don't become a bigger problem later.

Best of luck, and happy growing.

--------------------------------------------------------------------------------------
Anything i write about here is purely fictional, i am taking part in an on line Role Playing Game (RPG) about the cultivation of marijuana. In no way do i condone the cultivation, use, distribution, or consumption of the plant with genus "Cannabis" followed by species "Indica" or "Sativa" or any other breed or hybrid of said genus.

Darkace
05-09-2009, 09:34 PM
can u plz tell me wat yous think isnt safe and ill try fix it up beta .... the video takes are just 2 get them closer 2 the lights i dnt no wat u thinks wrong wif them..... yesterday day i went to a mitre 10 shop and found a bulb that said it was 60watts on this lil sticker... i removed the sticker and it said 105 >.> this bulb is fuken huge..

syde00
05-09-2009, 09:53 PM
can u plz tell me wat yous think isnt safe and ill try fix it up beta .... the video takes are just 2 get them closer 2 the lights i dnt no wat u thinks wrong wif them..... yesterday day i went to a mitre 10 shop and found a bulb that said it was 60watts on this lil sticker... i removed the sticker and it said 105 >.> this bulb is fuken huge..


I'd probably start with the light bulbs that look like they are about 2-3" under a painted wood surface and the wiring that is exceptionally unorganized... and it looks like the wiring you used came from the 1940s :p

your plants do look pretty decent though... i have to admit, i am very surpriused they have not stretched more in that setup.

edit: and btw, the info that bozo gave you a few weeks back is actually incredibly useful information... you should probably have read it instead of going off on him because he gave you more information than you might of expected

Darkace
05-09-2009, 10:00 PM
the wiring i used is swt... and the roof i have put some ova type material 2 reflect some light dwn i hope.... yer i no its unorganzied but its been running with out no problems for 3weeks straight nw

Darkace
05-09-2009, 10:04 PM
yer i auctaly did read and it had some pretty good info... he could of shown me and link 2 were he got the info which would of been 100x's beta

Darkace
05-09-2009, 10:07 PM
this is wat light i got in my box nw... 1 105 watt daylight 1 45 watt daylight 5 20watt warm white and 1 15 just 2 fill a space till i get another 20 for it... so its at about 265 watts should be plenty enough for such a small space

Darkace
05-13-2009, 10:12 PM
well i put them on 12/12 a few days ago and i think both of them are male :(:(:( which is very sad and i only got 1 plant of dat strain left

Italiano715
05-13-2009, 10:24 PM
well i put them on 12/12 a few days ago and i think both of them are male :(:(:( which is very sad and i only got 1 plant of dat strain left

NOOOO!! That really blows if so, you should get some pics so we may confirm it as sometimes the calyx will swell before opening, but if you see clusters forming, it's a rap. They are blahhhh and would need to be YANKED!

Sorry about your bad luck :wtf: That's why it's always good to grow at least 10 so that you get a better ratio. Oh well, live and learn

Darkace
05-13-2009, 10:29 PM
well they got lil preflower dat look like a lil ball on a stick...... and some ova werid looking things....... ill just put them by a window and get some pollen for more breeding.... and ill just get some clones from ma m8 and chuck them in there....

Italiano715
05-13-2009, 10:32 PM
Just remember if you plan on storing the pollen for more than 2 days to freeze it as it will go "bad" per-se if not frozen. Just food for thought! :thumbsup:

Darkace
05-18-2009, 12:17 AM
just got bak from a mission me and ma m8s went on.... got 9 clones just gta wait for them 2 root then ill give then a week of veg and get them into some budding.... ill put a pic up 2moz of those 2 plants

Darkace
05-19-2009, 10:22 PM
so sad there male.....