EmoRebellion
05-27-2008, 07:28 PM
We did a few slight modifications to the theater room this weekend. The main project was hoisting a new projector up to the ceiling.
http://giantandmidget.com/images/Right.JPG
http://giantandmidget.com/images/Front.JPG
This beast is a fully modded Electrohome Marquee 9500LC Ultra, and weighs about 180lbs. Modifications include HDMI card for full 1080p resolution, power supply regulator, fan noise reduction, lenses, ACON adjuster, and a custom fiberglass case.
We rented a drywall lift, which was only rated for about 150lbs max. After taking the three 12lb lenses off, we figured we should be closes to 150 lbs. The lift wasnt happy, but it held up with a little support from a ladder on one side. Its attached to the ceiling with a 2x6 thats secured to the studs with four 4-inch lag bolts.
We also added a new Integra DTC-9.8 Preamplifier/Processor.
Room Specs:
102" screen
7 B&W Speakers
Dual Sunfire powered subs
Custom reclining theater seats
http://giantandmidget.com/images/Rack.JPG
Rack Contents:
PS3 for BLU-RAY
Yamaha DVD Player (replaced with PS3)
Monster Power
DWIN Scaler (replaced with PS3/Pre-Pro)
New Integra DTC-9.8
Outlaw Amp
http://giantandmidget.com/images/Full.JPG
We havent set the convergence or the geometry fully yet, but the color looks incredible so far. I cant wait to get it fully set up in a couple weekends. This is the same model projector that the military uses in its flight training simulators, and is one of the highest rated in the world. The MSRP is around $50,000 (of course I didnt pay that...)
Thoughts? :rastasmoke:
http://giantandmidget.com/images/Right.JPG
http://giantandmidget.com/images/Front.JPG
This beast is a fully modded Electrohome Marquee 9500LC Ultra, and weighs about 180lbs. Modifications include HDMI card for full 1080p resolution, power supply regulator, fan noise reduction, lenses, ACON adjuster, and a custom fiberglass case.
We rented a drywall lift, which was only rated for about 150lbs max. After taking the three 12lb lenses off, we figured we should be closes to 150 lbs. The lift wasnt happy, but it held up with a little support from a ladder on one side. Its attached to the ceiling with a 2x6 thats secured to the studs with four 4-inch lag bolts.
We also added a new Integra DTC-9.8 Preamplifier/Processor.
Room Specs:
102" screen
7 B&W Speakers
Dual Sunfire powered subs
Custom reclining theater seats
http://giantandmidget.com/images/Rack.JPG
Rack Contents:
PS3 for BLU-RAY
Yamaha DVD Player (replaced with PS3)
Monster Power
DWIN Scaler (replaced with PS3/Pre-Pro)
New Integra DTC-9.8
Outlaw Amp
http://giantandmidget.com/images/Full.JPG
We havent set the convergence or the geometry fully yet, but the color looks incredible so far. I cant wait to get it fully set up in a couple weekends. This is the same model projector that the military uses in its flight training simulators, and is one of the highest rated in the world. The MSRP is around $50,000 (of course I didnt pay that...)
Thoughts? :rastasmoke: