View Full Version : Hot water bong!
maxsuperdanks
04-29-2008, 03:59 PM
Putting hot water as opposed to cold, then ice if you have a separate ice holder is genius.
Smoothest hits on earth, the hot water vapor helps to get rid of the harshness of the smoke immensely.
Figured I'd post another cool tip that'll mysteriously disappear like my Soldering Iron thread about lighting your pot with a hot soldering iron (The hell is with that? It was verified that a clean soldering iron was safe, it's not a DIY or Homemade, so I don't get it?)
linearvermin
05-01-2008, 03:18 AM
Hot water and cold water would make the bong have different temperatures in side it. Multiple temps. will result in the glass being easier to break. I've personally never tried this and cant imagine it would actually make it smoother. All your doing is risking your bong when you do that. Tap it on the sink while filling it up and CRACK its gone.
AZFour20
05-01-2008, 03:34 AM
I wouldn't reccomend trying this...
Ice + Hot water = Broken bong :(
maxsuperdanks
05-01-2008, 05:14 AM
I've done it multiple times, the water isn't that effin hot, it's hot enough to steam up, hardly hot enough to mess with good pyrex that you can easily bake and cook on the stove with.
No troubles, and smoother hits for surely.
And I did say ice catcher, it keeps the ice from touching the hot water at all.
affasd
05-01-2008, 05:26 AM
ya I do it in my friends roor all the time i think it would only be a problem if its cheap thinner glass
HighTy
05-01-2008, 05:28 AM
Yeah I tried the soldering iron thing, it didn't work effectivly.
maxsuperdanks
05-01-2008, 01:51 PM
Yeah I tried the soldering iron thing, it didn't work effectivly.
I guess it works differently with different irons *shrug*
maxsuperdanks
05-01-2008, 01:51 PM
ya I do it in my friends roor all the time i think it would only be a problem if its cheap thinner glass
Right, if you have a quality pyrex glass bong , it shouldn't be an issue.
the image reaper
05-01-2008, 03:57 PM
finally, somebody tried it ! ... I've been touting hot water in a bong for years, usually ignored :jointsmile:
josemartinez915
05-01-2008, 08:33 PM
yeah hot water is great, im usualy just too lazy to refill my bong with hot water every sesh
Euphoric7
05-01-2008, 08:53 PM
I've tried it before, but it always cooled down too fast. Advice?
420_24/7
05-01-2008, 10:11 PM
finally, somebody tried it ! ... I've been touting hot water in a bong for years, usually ignored :jointsmile:
I know what your talking about, I saw possibly the first post you ever made about the hot ,and everybody knocked it. I have no idea why. I think it works great, with or without the ice.
eyesmohk
05-01-2008, 10:20 PM
the whole reason you would use cold water is to condense the smoke as much as you can, producing a bigger hit than room temperature. if youre using warm water, youre probably just not getting as big of a hit...hence its 'smoother'. just a thought.
linearvermin
05-01-2008, 11:05 PM
the whole reason you would use cold water is to condense the smoke as much as you can, producing a bigger hit than room temperature. if youre using warm water, youre probably just not getting as big of a hit...hence its 'smoother'. just a thought.
Exactly what I was thinking
420_24/7
05-01-2008, 11:17 PM
the whole reason you would use cold water is to condense the smoke as much as you can, producing a bigger hit than room temperature. if youre using warm water, youre probably just not getting as big of a hit...hence its 'smoother'. just a thought.
I can get a big hit off of a hot water bong, and it's alot smoother than cold/room temp water
maxsuperdanks
05-02-2008, 02:07 AM
I've tried it before, but it always cooled down too fast. Advice?
Use hotter water, or get a bong with a bigger resevoir.
My VIP glass (picture a roor style, with a side jar for your stash) has an ash catcher, so I fill my bong up with hot ass water, then blow the hot water into the ash catcher, so it works double time.
Then I throw ice down into the ice catcher and rip that bitch.
maxsuperdanks
05-02-2008, 02:09 AM
the whole reason you would use cold water is to condense the smoke as much as you can, producing a bigger hit than room temperature. if youre using warm water, youre probably just not getting as big of a hit...hence its 'smoother'. just a thought.
That's what the ice is for bro.
I milk that shit every time regardless, I've never had trouble with too small a hit, rest assured :)
twitch
05-02-2008, 04:40 PM
if any one has an ash catcher what i do is put water in it then put it in the microwave till it boils then put it on the bong (becareful it hot)
i use it to i posted it up on the thread where every one was saying they use kool aid and shit
maxsuperdanks
05-02-2008, 05:46 PM
if any one has an ash catcher what i do is put water in it then put it in the microwave till it boils then put it on the bong (becareful it hot)
i use it to i posted it up on the thread where every one was saying they use kool aid and shit
SHIIIIT
That sounds like a killer idea!
swice1
05-02-2008, 05:46 PM
ya hot water! but fuck the ice..
hestehvisker
05-03-2008, 06:58 PM
its not really hard taking big hits as long as youre smoking pure weed, which i assume most of you from USA does. Try a hashmix :)
tho i find it hard to see how hot water would cool the hot smoke.
salaam
05-04-2008, 01:02 AM
The harsh parts of smoke are water-soluble. They become moreso with temperature increase. So hot water will make your smoke have a higher proportion of THC to pointless compounds like chlorophyll.
maxsuperdanks
05-04-2008, 02:08 AM
its not really hard taking big hits as long as youre smoking pure weed, which i assume most of you from USA does. Try a hashmix :)
tho i find it hard to see how hot water would cool the hot smoke.
It makes a smoother hit by the steam and hot water vapor along with the hot water itself attaching to the chlorophyll and other bullshit that makes smoke harsh.
Robob420
06-25-2008, 10:10 AM
can anyone post some pics of a hot water bong hit?
or a vid cz then you could probably tell if it was a dense hit or not
what i ws thinking is that i ahve a double chambered bong so fill the first with hot water and the second with cold ?
jimmy8778
06-25-2008, 01:03 PM
see, i see the hot water as being smoother, but i dont feel that it has too much to do with the other chemicals getting trapped in the water, not enough of them contact the water due to the fact that your blowing smoke bubbles, as much as the fact that instead of cooling the outside of the bubble with a hot inner core, your lowering the overall temperature of all the smoke, along with adding water vapor to the smoke. Due to the water vapor, your getting less of a hit, but not a very noticeable one.
hot water=good hits.
every so often i still have a cough or two after some hot water rips, but they are usually short lived, and much easier with the hot water. Everyone just needs to try it. The hottest water you get out of your tap works perfect.
firstnamesonly
06-25-2008, 03:12 PM
I remember trying it out of hot water once and it got really foamy and the hit tasted weird to me. If I had an ice catcher I would try actually if I had a bong I would try but some moron (me) broke it. Actually I think it was shotty workmanship because it just fell over on the carpet and the damn thing seperated into two with a clean cut between the curve of the tube part and the bottom part. The damn edge is so sharp I cut myself pretty good picking it up and didn't even realize until I saw the blood running down my hand. Never buying another glass bong again.
nicktheawesome
06-27-2008, 12:42 AM
Hot water is amazing, but the bong has gotta be really clean. Otherwise you just get a hit that tastes like bong water.
And yes, the hits are still plenty thick. The water is hot and the steam soothes your throat and lungs. It sounds like bullshit, I know. But once you try it, its absolutely unbelievable. You'll get wrecked and your lungs and throat aren't the wiser...:thumbsup:
maxsuperdanks
06-29-2008, 07:55 AM
Hot water is amazing, but the bong has gotta be really clean. Otherwise you just get a hit that tastes like bong water.
And yes, the hits are still plenty thick. The water is hot and the steam soothes your throat and lungs. It sounds like bullshit, I know. But once you try it, its absolutely unbelievable. You'll get wrecked and your lungs and throat aren't the wiser...:thumbsup:
If you think about it, you take a hot shower when you have a cold, and it helps soothe your throat and lungs, along with breaking up shit in your sinus and chest.
stothelutz
07-02-2008, 02:51 AM
if any one has an ash catcher what i do is put water in it then put it in the microwave till it boils then put it on the bong (becareful it hot)
i use it to i posted it up on the thread where every one was saying they use kool aid and shit
Great idea Im gunna try this asap. And the hot/cold idea is good except the fact that it will temporarly make the bong more breakable but may have amazing rips.
jimmy8778
07-02-2008, 03:44 AM
i actually just got done taking some hot water hits, they are nice. especially right after you clean your bong.
d16daily
07-12-2008, 02:16 AM
glass will for sure break with extreme changes in temperature!!!!!
trust me I use to work at a restaurant and glasses use to break left and right when they came out of the washer and someone rinsed it under cold water. .. . . . . .
wheresmylighternow
07-12-2008, 02:22 AM
glass will for sure break with extreme changes in temperature!!!!!
trust me I use to work at a restaurant and glasses use to break left and right when they came out of the washer and someone rinsed it under cold water. .. . . . . .
yep, way unstable dealing with temp changes
p.s
d16daily. does your screen name have anything to do d16z6 daily driver? if you have no idea what i mean, then its a easy no.
jimmy8778
07-12-2008, 06:39 AM
the temperature change isnt as bad when it goes from cold to hot like when you use it to take hits with hot water, its when it goes from really hot to really cold really quickly that glass breaks, something about the structure makes it happen, but rarely when it goes from cold to hot,
so hot water bong=safe, hot bong+cold water=bad
nicktheawesome
07-17-2008, 06:14 PM
If you are really concerned, just use the hot water. It is by far the more important "half" of this equation.
Also, a good quality pyrex bong will have no issue with this. If you bought a cheap glass bong, it will break easily. Buy quality, it'll last.
d16daily
08-09-2008, 02:08 AM
yep, way unstable dealing with temp changes
p.s
d16daily. does your screen name have anything to do d16z6 daily driver? if you have no idea what i mean, then its a easy no.
yea it does
lol, smarty
Light It Up
08-16-2008, 03:46 PM
I wouldn't be concerned about having hot water and ice in an ice catcher of the same bong, assuming it's of decent quality and glass thickness, and assuming you're not just putting large amounts of ice into boiling water. While I wouldn't say it's good for the bong's structural integrity, I would be surprised if someone's piece broke from temperature difference, rather than rapid temperature change, as is the case with the situation d16 described.
In terms of smoothness, as others have already mentioned, there are two factors: first, water vapor combines with smoke to give you more oxygen as you take the hit. This makes the smoke slightly less dense, but much easier on the lungs, perhaps allowing even bigger hits. I recall seeing bongs actually designed with small holes (cyclone I believe) to allow air in for the same purposes. The second factor, which I'm surprised hasn't been mentioned much, is more extensive filtration of carcinogens and harsh particles contained within the smoke. This is because with higher temperature, solubility increases, meaning the chemicals stay in the water, not in your lungs. This also means, however, that you may be losing more THC (not to mention other cannabinoids), as that too has higher solubility in conditions of high temperature. For this reason, I'd avoid boiling water - think cannabis tea - and stick to warm or hot.
Also, don't that more stuff in your water means more of a "bong water" effect, which is that much nastier if some of the water is evaporating, so you'll probably want to change your water between sessions.
trancefusion5
08-16-2008, 07:40 PM
glass will for sure break with extreme changes in temperature!!!!!
trust me I use to work at a restaurant and glasses use to break left and right when they came out of the washer and someone rinsed it under cold water. .. . . . . .
While your right about extreme temperature change in glass causing weakness and even cracks that does not mean that using this method will break a heavy glass Pyrex bong. The temperature were talking about are not extreme enough. I am a glass artist who makes a lot of pipes and the only time you should have this problem is if the glass was annealed wrong. I wouldnâ??t boil the water but if youâ??re just using hot tape water you will be fine. If something does go wrong that only means the guy who made your bong didnâ??t know what he was doing when he put it in the kiln.
trancefusion5
08-17-2008, 05:34 PM
Think about it. If your already using ice in your bong and you put a lighter to the bowl (lighters are much hotter than tap water) why wouldnt it break then but it will with hot water? I know its not exactly the same but if you have ice in the bong than in a few minutes the stem and slide will be just as cold as everything else, then you put a lighter to it. If a bong will break with hot water and ice then it would also break the slide every time you use ice and try to light your bong. It doesnt happen unless your glass was annealed improper.
Revanche21
08-17-2008, 06:02 PM
I love my volcano... no fear of dropping and breaking an investment
and if you do somehow drop it, it just gets a dent and keeps chugging along
I never liked hot water in a bong, I would think you get less THC per hit too by volume due to the heat expanding the air? I guess it would hurt less because of a smaller hit
Isn't getting too much vapor into your lungs bad? causes an infection or something? I'm not too sure something I faintly remember... someone a doctor that can verify or deny?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.