View Full Version : screen idea
eevus
09-14-2007, 01:26 AM
im trying to make a piece,and cant find anything to use for a screen,would steel wool work? if i just kinda shoved it down the tube? basically all it is is a metal pen tube with a socket.
KomfortablyKnumb
09-14-2007, 01:35 AM
for my first bowl i used wire cutters to cut a screen out of a boom box speaker. but you could just put a little rock in that covers most of the hole
The Lemon
09-14-2007, 01:40 AM
steel wool is highly flammable :wtf:
edwardteach
09-14-2007, 02:17 AM
I have used a tab from a soda can in the past
Megaz
09-14-2007, 02:38 AM
I wonder if these are safe to smoke out of.. it's wire mesh to catch hair in a bath tub.
http://i10.photobucket.com/albums/a133/Megaz08/IMG_0342.jpg
The best way to go (if you can) is go to your local hardware store and ask for wire mesh that can be easily cut by scissors.
Stumps
09-14-2007, 03:18 AM
The best way to go (if you can) is go to your local hardware store and ask for wire mesh that can be easily cut by scissors.thats pretty inconvenient. just smash an earbud from an ipod headphone and use that screen. cut it to your desired size. Also, put a flame to it for about 10 secs. it gives off black smoke at the start.
ismokealldaylong420
09-14-2007, 04:37 AM
Well if you have metal filters for your sinks just take that out and use it.if not just use a piece of screen of a window.
Rhymenocerus
09-15-2007, 06:02 PM
thats pretty inconvenient. just smash an earbud from an ipod headphone and use that screen. cut it to your desired size. Also, put a flame to it for about 10 secs. it gives off black smoke at the start.
I second that. Just look for any old pair of headphones, they almost always have a screen like that. Make sure to burn it like Stumps said.
SantaClawz
09-15-2007, 06:05 PM
Id go for the aeriators in your faucets, they are pretty durable. What are you using for the acual peice?
eevus
09-17-2007, 10:43 PM
a tube from a tire pressure checker and a socket
crucial conflict
09-17-2007, 11:01 PM
what i do is take a pop can cut it open. cut off a square then take the square piece and cut at it until i have a perfect circle that will fit the bowl. then i take a saftey pin and cut holes in it very easy fast and its not flammable.
Mohksha
09-18-2007, 12:35 AM
ya just cut a piece of a coke can like crucial_conflict said. that works really well. better than you would expect actually
OLDE ENGLISH '800
09-18-2007, 01:02 AM
check your faucets theres screens in them that work fine
eevus
09-18-2007, 02:17 AM
check your faucets theres screens in them that work fine
sorry,but im kinda new to the whole home-made piece thing,but how do i get the screen from a sink?
and a piece of aluminium can is out of the question since fire+aluminium can=alzheimers
OLDE ENGLISH '800
09-18-2007, 02:23 AM
i usualy find them in the bathroom just put your finger up the faucet and if you feel a screen then unscrew it and there is usualy 2 in there,same kind you buy at the store i think anyway
LuckyG
09-18-2007, 07:56 PM
Put an appropriately-sized clean pebble over the hole in the bowl. Cheap, and the best part is it works (as long as you don't grind your weed up really fine).
HighTillIDie
09-18-2007, 07:58 PM
Put an appropriately-sized clean pebble over the hole in the bowl. Cheap, and the best part is it works (as long as you don't grind your weed up really fine).
you can put a small screw in for the same effect...
if anyone is familiar with glass pipe "screens" you get the idea
miraz
09-18-2007, 08:03 PM
half the shit you guys are saying will either burn or is definetly not good to smoke out of.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.