View Full Version : How do you make a nugget?
whatupmotha
06-28-2007, 01:56 PM
Can anyone tell me how to make a nugget? I know what it is and all I'm just not sure how to make one.
Thanks!
cannabis campbell
06-28-2007, 02:16 PM
Ingredients:
1 pound of chicken breast cut into 1 inch pieces
1 egg beaten
1/2 cup flour
1/4 tsp pepper
1/8 tsp salt
1/2 tsp garlic powder
2 cups crushed Ritz crackers
1 gallon of vegetable oil
Instructions:
Heat vegetable oil in deep fat fryer per instructions with heating unit.
Add seasonings to flour, place on a plate and set aside.
Dip chicken pieces in flour.
Follow by dipping each piece of chicken in the egg and then directly into the cracker crumbs for an even coating. Set each piece aside on a clean plate untill all are coated evenly by the egg/cracker breading.
Carefully drop a few pieces of the cracker coated chicken into the preheated oil. When the chicken floats to the top of the oil and is a deep golden brown, carefully remove the chicken from the oil with a metal slotted spoon or basket designed to do this.
Place this cooked chicken on a paper towl lined plate so that the excess oil is blotted off.
Continue to cook the chicken this way until it is all cooked. You may need to give the oil time to heat up again a few minutes between times depending on the size of your fryer.
This recipe makes a very crunchy tasty breading with a juicy tender chicken in the middle.
:)!
whatupmotha
06-28-2007, 02:40 PM
Ha-ha, real funny Campbell. But seriously, how do you make a nug?
psteve
06-28-2007, 02:49 PM
A 'nug' is a cannabis bud. You don't 'make' them. You grow them.
statechamp3
06-28-2007, 02:50 PM
Ingredients:
1 pound of chicken breast cut into 1 inch pieces
1 egg beaten
1/2 cup flour
1/4 tsp pepper
1/8 tsp salt
1/2 tsp garlic powder
2 cups crushed Ritz crackers
1 gallon of vegetable oil
Instructions:
Heat vegetable oil in deep fat fryer per instructions with heating unit.
Add seasonings to flour, place on a plate and set aside.
Dip chicken pieces in flour.
Follow by dipping each piece of chicken in the egg and then directly into the cracker crumbs for an even coating. Set each piece aside on a clean plate untill all are coated evenly by the egg/cracker breading.
Carefully drop a few pieces of the cracker coated chicken into the preheated oil. When the chicken floats to the top of the oil and is a deep golden brown, carefully remove the chicken from the oil with a metal slotted spoon or basket designed to do this.
Place this cooked chicken on a paper towl lined plate so that the excess oil is blotted off.
Continue to cook the chicken this way until it is all cooked. You may need to give the oil time to heat up again a few minutes between times depending on the size of your fryer.
This recipe makes a very crunchy tasty breading with a juicy tender chicken in the middle.
:)!
LMAO , talk about havin a lot of time on ur hands j/k .... but anyway you get a nugget by grow'n it... its a bud
statechamp3
06-28-2007, 02:52 PM
lmao wow steve beat me to the gun by like a second....
Land of Drought
06-28-2007, 02:52 PM
Cannabis Grows??. Naw cant be. How do you make a nugget??..lol
Get some seeds for a start,,,,Pls
whatupmotha
06-28-2007, 03:09 PM
Where I live a nugget is made, it's like stringed together by the stems and leaves.
Oil_Man
06-28-2007, 03:14 PM
hahahaha???? oh ur serious... like idk what to say.. ur nugs are made like that??? i think ya need a new dealer or somthin lol but idk
Frivolous248
06-28-2007, 03:15 PM
No...no it isn't.
I'm sorry but there seriously is such thing as a stupid question.
mikeo14
06-28-2007, 03:21 PM
I've seem like 3 of these kinds of post asking how to make a nugget before.
someone give this guy a picture of a bud
Where I live a nugget is made, it's like stringed together by the stems and leaves.
Hahahahah - then your smoking fucking shit weed. IF it's even weed.
one.stoned.wookie
06-28-2007, 03:26 PM
omg this is the most worthless post on this site first of all nugs are not leafs and stems its the female pistalate flowers some leaf its grown natrualy in a nug.........damn some people smoke and dunno wtf a nug is LOL
Oil_Man
06-28-2007, 03:27 PM
hey, buy a nug of this shit that was put together.. an put a picture on the site i wanna see what it really is ahha
hey, buy a nug of this shit that was put together.. an put a picture on the site i wanna see what it really is ahha
It wouldnt surprise me if it's oregano glued together in a ball with some string wrapped around it - if this guy thinks you MAKE buds then he obviously doesnt know what weed is.
stinkyattic
06-28-2007, 03:47 PM
Where I live a nugget is made, it's like stringed together by the stems and leaves.
String, a stem, and some weed... no WAY do you have access to Thai Stick. lol
You wanna know how to make a bud? Here ya go...
http://boards.cannabis.com/grow-faqs/
O' Cannabis
06-28-2007, 03:58 PM
^ I love Thai Stick... We had a bunch of Chocolate Thai around here like 5 months ago, It was cheap 2 at $140 an Oz.
AlwaysBlazed
06-28-2007, 04:14 PM
Where I live a nugget is made, it's like stringed together by the stems and leaves.
when cannabis is dried off the plant the buds just naturally form nuggets or 'nugs'... this is the good shit
please stop buying from your dealer who sells your leaves tied to stems lol
a good nug should have no stems or seeds with nice orange hairs and crystals
xcrispi
06-28-2007, 04:25 PM
1- a seed
2- a whole lot of love
= 3- nugs
Crispi :jointsmile:
nightlight
06-28-2007, 04:45 PM
Where I live a nugget is made, it's like stringed together by the stems and leaves.
what do they do with the actual nugs?
what do they do with the actual nugs?
Sell them to people who arnt stupid probably LOL
Matt the Funk
06-28-2007, 06:13 PM
I was about to post a picture of a nug.....but this thread is kinda of funny, so I said fuck it.
stinkyattic
06-28-2007, 06:23 PM
^ I love Thai Stick... We had a bunch of Chocolate Thai around here like 5 months ago, It was cheap 2 at $140 an Oz.
Was it actually Thai stick, or just a Thai strain?
Stick refers to the post-harvest processing... which involves a stem or splinter of bamboo, and some string.
It's somewhat akin to 'Malawi Cob' - the idea of portioning out and shaping the buds during drying- but the cob uses leaves to achieve the shape, and for packaging.
jaGerbom
06-28-2007, 08:06 PM
what i like to do to make my nugs is first take an everlasting gobstopper, then u dip that in a cup of glue until it is completely covered.....then u find the shittiest weed u can thats ground up, then roll the glue ball around in it for a while till its a lil nug of weed.
then u sell it to an 8 year old and tell him nugs have to be made.
lul.
Sweyn Forkbeard
06-28-2007, 08:39 PM
I bet whatupmotha is sorry he even asked!
Peruvian Devil
06-29-2007, 03:57 AM
ROFLMAO campbell that was just 2 great
Juggalo k00kie
06-29-2007, 06:47 AM
what i like to do to make my nugs is first take an everlasting gobstopper, then u dip that in a cup of glue until it is completely covered.....then u find the shittiest weed u can thats ground up, then roll the glue ball around in it for a while till its a lil nug of weed.
then u sell it to an 8 year old and tell him nugs have to be made.
lul.
LMAO what he said
slipknotpsycho
06-29-2007, 07:08 AM
same troll diffrent day...
orangeman
06-29-2007, 12:51 PM
Wow lol, when you actually learn about weed I'm telling you you're gonna be embarrassed looking back on this thread. Nuggets are not "made" they're grown. No one strings shit together, it starts from a naked branch at the internodes as a little budlet and it gradually grows more and more skinny tiny little budlets all around that first tiny budlet until they fatten up to form a cluster and form a head while little budlets are still poking out in every direction until they are mature and fat enough to be cut down and dried and then you'll have the bud to smoke.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.