Log in

View Full Version : Help cleaning my glass pipe



Bong ripper420
06-18-2007, 11:39 PM
my glass pipe is a spoon pipe. muc like the ones in the pictures. except bigger. I like my pipe to always be clean (pretty much spotless). but on the bottom by where the bowl is but inside the pipe its dirty and i dont know how to clean it. I use rubbing alcohol and it seems to get almost everything but it does not clean the inside by the bowl.

TX Girl
06-18-2007, 11:47 PM
do you have any pipe cleaners to scrub it with?

let it sit in the alc and then use a pipe cleaner to scrub it out. if you dont have a pc then perhaps you can get a qtip to the right spot?

blazed_babe
06-18-2007, 11:50 PM
i always use oxiclean, and it gets my glass pipes spotless ( i have four). i boil some water on the stove, get a bowl, put a couple of tablespoons of the oxiclean powder in it, pour the hot water in, and then i always wait a few mins, add a little bit more oxiclean, and put my pipes in the water. and then i usually am baked and i forget that they're in there...so i always let them soak for different times lol. but yeah, if they're not completely clean when i take them out, i run hot water through them and then they're spotless!

here are my pipes, after cleaning them with the oxiclean:

blazed_babe
06-19-2007, 12:04 AM
**** forgot to mention, this method does put off a little bit of a smell, but not much. a bit of febreze is enough to cover it up, in case you do live at home with your parents

Bong ripper420
06-19-2007, 12:20 AM
wow blazed babe i live with my parents and your pipes look great and you dont look bad yourself but are you taking about the oxiclean detergent. the one that has weird commercials on tv.

blazed_babe
06-19-2007, 02:42 AM
wow blazed babe i live with my parents and your pipes look great and you dont look bad yourself but are you taking about the oxiclean detergent. the one that has weird commercials on tv.

thanks!! :)

*actually, my avatar isn't me, but grace slick from the band jefferson airplane. this is me lol
http://boards.cannabis.com/cannabis-com-lounge/118980-do-you-wear-glasses.html

and yeah, the oxiclean detergent. the commercials where the guy always yells haha. he annoys the hell out of me

Mr.Dank
06-19-2007, 02:45 AM
what i do is just boil a pot of water, then put the pipe in once it boiling. i leave it in for 15-45 minutes. (i usually do 45, gets everything). then remove pot from flame. put pan in sink under the facet. put the hole u hit it from on the pipe under the stream of water and draining into the pot for like 5-9 seconds, (dont need a heavy stream of water, jsut small.) now, just slowly drain the pot, into a coffe filter ontop of your drain.the water will go through and you will get a thing of resin on the coffe filter. scraping after doing this isa good idea too. jus a quick scrap tho.

User Name Here
06-20-2007, 11:25 AM
I can get my peices pritty clean with just some work.

I usually get a paper clip and bend it into shape. Then get the tap water as hot as it can go. Let and soak for a bit then start scraping. I also use q-tips or pipe cleaner.

I've collected resin from my pipe to smoke a couple times. But i've realized its disgusting because I take it everywhere and fibers and shit get into it and its gross.

JustinSKS
06-20-2007, 03:40 PM
This is how I do it, took it from another thread(I wrote it, just copy and paste it)

Here's what I do. I'll take my glass pieces, pour a bit of salt in the dirty region, and some in a sandwich bag, I prefer ones with the sealing strip. I pour salt in the bag then some rubbing alcohol. I shake it for 5-10 minutes. I will blow in it see if any loose bits of resin come flying out. I then take some Q-tips with some rubbing alcohol on them and fish it around in the holes (carb, mouth piece, and bowl). The Q-tip will be covered in shitty black resin, I just discard it. After a few q-tips I'll shake it some more. Blow out chunks that are loose. Just keep repeating the steps till clean. Uh, you don't really need to refresh the alcohol or salt during this. Even if the water gets black, it'll still work. I did it with my glass pipe it wasn't cleaned for over 1 year+. I bought it from some guy who never cleaned it since the day he got it. There was so much nasty resin in that pipe. Lol ew. Well, have fun. I don't personally opt for boiling, not up for the risk of breaking glass with the fast temperature changes and such. Fuck it. . Here's a picture of my pipe and my bong, which I cleaned the day I took the pictures.

slpntrx5
06-20-2007, 04:19 PM
last time i put the alcohol and salt in a bag, the bag like...dissolved...so would a tupperware container work, do ya think?

blazed_babe
06-20-2007, 04:43 PM
last time i put the alcohol and salt in a bag, the bag like...dissolved...so would a tupperware container work, do ya think?

yeah tupperware is probably good. i just don't use the alcohol and salt method because i hate the smell of alcohol, and the oxiclean method i use only takes maybe 20 mins tops, if that even, and no scraping or anything of the pipes is necessary - but it doesn't save resin this way, no worries for me though, because that shit is sticky and tastes horrible, so i don't smoke it

NteeM
06-20-2007, 04:52 PM
i always use oxiclean, and it gets my glass pipes spotless ( i have four). i boil some water on the stove, get a bowl, put a couple of tablespoons of the oxiclean powder in it, pour the hot water in, and then i always wait a few mins, add a little bit more oxiclean, and put my pipes in the water. and then i usually am baked and i forget that they're in there...so i always let them soak for different times lol. but yeah, if they're not completely clean when i take them out, i run hot water through them and then they're spotless!

here are my pipes, after cleaning them with the oxiclean:

I've used oxyclean and it works pretty good. I usually use salt + rubbing alcohol. nice bowls, btw.

Granger01
06-20-2007, 04:53 PM
Place your peice in a bowl of alcohol, let it set for overnight. Then wash out with hot water, and use q-tips to get the hard to reach places..

blazed_babe
06-20-2007, 04:56 PM
I've used oxyclean and it works pretty good. I usually use salt + rubbing alcohol. nice bowls, btw.

thanks dude :)

yeah, i've always used the oxiclean method because there's hardly anything to it :) and that rubbing alcohol...yuck lol i just can't stand the smell of it, otherwise, i'm sure that's what i would use haha.

TheDefiler
06-22-2007, 11:33 AM
I dunno why everyone is so down on smoking resin. To me it doesnt really taste like anything....certainly not like the shit that everyone says it tastes like. And its a good "emergency fund" for when your dry.

GorillaMan
06-22-2007, 12:05 PM
ive never tried oxiclean but id supposed it work fine. I always let it soak in a bowl of warm water with some denture cleaner. Then use pipe cleaners. you have to go to an actuall tobaccanist to get the pipe cleaners though. get the kind with metal bristles and shit.

BlazedOver32
06-22-2007, 10:14 PM
Hey Guys I bought a metal pipe 4 like 7$ IT works great but you guys do know that any pipe after being ripped smells....How do yu get smell out :jointsmile:

clever421
06-23-2007, 12:37 AM
cologne?

WhereDaBudAt
06-23-2007, 12:41 AM
i use 420 cleaner.

orangeman
06-23-2007, 01:07 AM
http://boards.cannabis.com/recreational/120236-cleaning.html

2600HERTZ
06-24-2007, 10:05 PM
For ease of use and ridding of smell, there is a chemical called Formula 420. It is a bit pricey but most people seem to like it. I however just use a 25%alcohol 75%water mixture and put rice or salt in it, to act as an abbrasive and that works great for me.