For those trying to make a bong:

[Climbing High]

hey, i just have to share this with someone. when i get high, i become very inspired to make things, and the other day i was inspired to make my own bong and water pipe. not on;y are they made from household items, but they work perfectly, look real, and are incredibly durable. here's what i used:
-big tomato sauce glass bottle with tin top
-bowl (any type: metal, glass, tin foil)
-several feet of tubes (you can get these at any hardware store)
-knife or drill
-water and ice
-bubble gum
-duct tape
To start, cut a hole in the top of the sauce bottle the size of the bowls stem. then attach the stem to the tubing, make it air tight using bubble gum. the next step is to cut another hole on the top and insert tubing. the tube should only go half an inch into the bottle, but can be as long as you wish. using the duct tape, make the container air tight from the bottom, and then use bubble gum to seal any holes from the top. when the container is air tight, cut a carb wherever you find it comfortable. these are incredibly durable and look very nice, they hit hard as hell too. i've attached a picture.

[Climbing High]

hope this was helpful to those of you who are having trouble building a bong. if my instructions arent clear, let me know.

[kuulbns]

Very Creative! Maybe we should send it to HGTV (home and garden channel)! A new Arts and Crafts project for Martha Stewart eh? LOL Good Job

[Buck268]

Very slick!! I would recommend Silicone sealer or clay or anything more durable than gum though... if ya got it around (which I do, being the toolman I am :p )...

If I had a firewire hookup for my comp I'd snap some pics with dad's old digi of my homemade water pieces, but I don't :(

[Climbing High]

buck, next time ill try your way. sounds like it would make them even better, not bad for a first time builder though, considering i was high. bubble gum just seemed like a good material at the time cuz i had alot of it, and was way to high to go into town to buy clay. thanks for the feedback, i'm gonna go hit that big bong now. peace

[Buck268]

oh, I'm definately not knock'n your rigs in any way, they definately look to get the job done nicely. Just was providing options for your further endevours :D

BTW, what did you use as a bowl on that bong? Looks like a 5/8 socket or some shit...

[Climbing High]

haha, dont get me wrong, i enjoy constructive critisism. yea, the bowl on the big one was actually some type of socket that i "borrowed" from the woodshop at my school. they have plenty of them. on the smaller one i used some type of metal bowl that is meant to be used on a hose in one way or another. both bowls work perfect, they hit really hard. peace

[Buck268]

How does that socket hit? Can you check the size, I'll bet its 5/8" does it take a standard sink screen?

We are the biggest pot heads man, reread our posts baw ahahah! :D

[Climbing High]

haha, potheads for life. yea, it was 5/8, and it hits beutifully. the total height of it is 2 and a half feet right now, and when i took a hit, it nearly knocked me on my ass. i just use a metal pipe screen, and cut it to fit the bowl. if you ever in NH we should share a bowl. peace

[SomeGuy]

http://boards.cannabis.com/showthread.php?t=9833
Check mine, besides thos..I just got a glass drill bit and am in the process of making more :p

[slipknotpsycho]

look yal need to stop this......i got a 50 dollar wal mart gift card for christmas....and i don't wanna have to go to the hardware section...lmao....

[Climbing High]

the tubing only costed a total of around 30 cents, so dont worry about spending all that money on your gift card unless you plan on making a few hundred bongs.

[Buck268]

I need to get some brake line or some shit to make a stem for my tea bottle bong :(

[CCR]

hey man they werent clear to me once again is there anyway u can take a pic of the inside on one of urs that uve made so i can see some shit? thatd be cool if u could and it showed up clear anway peace

[Climbing High]

yea, tomarrow ill post some picks of the inside.

[Climbing High]

heres the photos you asked for of the inside structure. as you can see, the stem from the bowl goes down much deeper then the stem that you suck from. when filling the bong, the water level should be about an inch or two above the bowls stem. the tube you suck from must be a few inches above water. hope this helped. :rolleyes:

[SomeGuy]

nice...some friends and i made a 3 hose bong sorta like that.
and for people making their own...just go to home depot, or a similar store. you can buy
6x12 Feet screen roll: $5 (enough to make in the area of 500 bongs)
Steel Bowl like joints: 90 cents
10 feet of small PVC piping: $1
Tubing : $1
Glass Drill Bit: $6

Imagine all the possibilities!!!! For so little money

Have Fun

[SomeGuy]

BTW here are some i made with stuff from around my house...for free
http://boards.cannabis.com/showthread.php?t=9833

[CCR]

alright cool climbing high thanks. thats exactly what i was lookin for-peace

[Climbing High]

no problem, let me know if you have any more questions.
peace

[Climbing High]

:(
my parents found the smaller one and took it. it hit so beutifully, ill always remember that cool little bong.
:(

[ride n get high]

dude im sorry to hear about ure lil beatiful glass peice . Im sure u loved it like a son. But props on those bongs. VERY creative and they like nice and airtight.

[kraloth]

ok heres an easy bong get a bottle like 500ml and stab a biro pen into it take the stuff out put a bong head on it put water on and figure out the rest not fance not gd looking not realy a gd bong but when u got no papers u use wots handy

[passit420]

this one almost looks exactly like mine. damn

[Encatuse]

Very very awesome! I'll be making a double bubbler soon.

[beaver]

heres how to make the most simple bong i know of (in desperate times of course)
ok u take a twenty ounce bottle ,empty it,then take the wrapper off, now right where the wrapper was burn a hole the size of your thumb with a lighter or candle, when the hole is burnt take a piece of aluminum foil and poke tiny holes all in it with a needle, put the foil around youre thumb and then push it into the hole, make sure theres a little foil left on the outside of the bottle and push that flat with the outside of the bottle.....
after uve made it pack the bowl with ur favorite kind of astro-turf and suck out of the part where u drink...

Fun
fun
fun

[passit420]

I MADE MY BONG WITH
[list]
mason jar
a tube (i used a hollow crayola marker)
another tube (long and skinny)
some sort of small funnel (i used something from a hose)
plumbers putty (to seal off top)
a drill (to drill holes in lid)

[JonnyEagle]

I had one alot like the one you have the picture of only i made it out of a Jelly Belly carton just for style : D PRetty much the exact same design